Hi Guys, I haven't been around for awhile. I've been in and out of the hospital since Dec 1st. Think I'm finally on the mend now. I love your new items that you and Brandy came up with, great job. I love all 3 of them. Take care and God Bless.
Nice video. Just wanted to pass along, another YT'er I watch found that removing a small portion of the brush on the left side near the front corner allows a camera to be fastened to give a view of the working bit without creating a lot of excess dust - has to do with the direction the dust is sent by the bit.
Gen itsu sure has come a long way since the 3018 prover. Impressive little machine. I’m hoping with taxes to get the Onefinity with the masso controller. I’ve worked on 5’x12’ Omni cnc with bitchanger and 25’x80’ cnc dual head plasma. I miss it and want one really bad
Do you have a detailed video and/or plans, showing how you built that 64x64 table?? I does have some very interesting design elements, and I'd like to see if it's something I'd be interested in building for my 1500x1500mm CNC.
Is the actual cutting area 600mmx500mm? I've been looking in getting one of these to cutout and slot my banjo fingerboards, headplates and pearl inlays. Thanks!
@@hwy8964 I dropped down 1mm into my spoil board to test and hit all the limit switches. The cut was 600x500 from center to center. That is touching the limit switches though.
I know they ship with a 65mm spindle holder which fits the Makita router you mention but electrically do you need to upgrade anything or is the router not plugged into the Genmitsu controller? How is it connected and does it turn off after a job with candle etc? TIA!
Hi Guys, I haven't been around for awhile. I've been in and out of the hospital since Dec 1st. Think I'm finally on the mend now. I love your new items that you and Brandy came up with, great job. I love all 3 of them. Take care and God Bless.
Glad your back. Thanks, we like them also. Just hope the folks bidding like them as well.
Love the new items! You and Brandy did a great job with these!!!
Thanks so much!!
Nice projects and progress 👏
Thanks, I am glad to have a bigger machine for CNC work.
So are we calling this one the teenager CNC? Nice projects with it!
Its a MID size,,,lol
Nice video. Just wanted to pass along, another YT'er I watch found that removing a small portion of the brush on the left side near the front corner allows a camera to be fastened to give a view of the working bit without creating a lot of excess dust - has to do with the direction the dust is sent by the bit.
I would make a transparent cover if that was an issue. Not a bad idea I guess. As much as I run it, I want the dust collection top notch.
Gen itsu sure has come a long way since the 3018 prover. Impressive little machine. I’m hoping with taxes to get the Onefinity with the masso controller. I’ve worked on 5’x12’ Omni cnc with bitchanger and 25’x80’ cnc dual head plasma. I miss it and want one really bad
They have improved. I am looking at moving up myself when finances allow.
Do you have a detailed video and/or plans, showing how you built that 64x64 table?? I does have some very interesting design elements, and I'd like to see if it's something I'd be interested in building for my 1500x1500mm CNC.
I drew it up but once I started, I ended up bulking up the support structure. I can sit down one day and update the drawing maybe.
Is the actual cutting area 600mmx500mm? I've been looking in getting one of these to cutout and slot my banjo fingerboards, headplates and pearl inlays. Thanks!
That is what they advertise, I will have to step it over to confirm.
@@TheClackShack I really appreciate it!
@@hwy8964 I dropped down 1mm into my spoil board to test and hit all the limit switches. The cut was 600x500 from center to center. That is touching the limit switches though.
@@TheClackShack Thanks for checking that. The max I'll be cutting will be 20"x4" majority of the time.
I know they ship with a 65mm spindle holder which fits the Makita router you mention but electrically do you need to upgrade anything or is the router not plugged into the Genmitsu controller? How is it connected and does it turn off after a job with candle etc? TIA!
If you want it to auto turn on and off. You need a relay like I run.