Hey DJ, super video, cheers. I’m. Just getting back into modelling aiming to paint my first 5/6 kits by hand and perhaps treat myself to airbrushing, very helpful video, take care.
So I’m in the market for an airbrush to paint my baits and I subscribed when I saw all the baits in the background so I watched the whole video at the end you said it was 8 months bad luck if I don’t like and subscribe and I did before you said that I feel so much better great video man
Thanks brother! I’d say if you can spend the money get an iwata hp-cs . I wouldn’t use anything else after all the brushes I’ve used . But I won’t say that there aren’t cheaper brushes that won’t do that job if you don’t wanna spend the money. They will do the job. But they will also make u frustrated and you’ll eventually spend the money on a good brush. Just my 2 cents bud. For what it’s worth .
@@DJCustomBaits I learned the same lesson with fishing rods 🤷🏻♂️ I am going to get the hp-cs thanks for getting back to me and keep the video coming bait making and fishing 🇺🇸
What your painting makes a huge impact on what brush you need. I pretty much never touch my HP-CS, which is my lowest level brush. At best I'll do a wash or a fade with it. I don't know anything about baits, but for what I do I need a whole other level of tools. Not knocking what you do, making stuff is awesome. Besides painting i also build guitars from scratch. I actually had no idea there was so large a market for painting lures.
been painting for 8 months, spray gunner is the best place I've found for price wise on any createx paint. i run the iwata guna buy another and start making some musky lures!
Second person I’ve heard recommend that air brush. I plan to make vertical jigs but instead of cheap foil hot pressing I really want to powder glow paint then air brush finer details although I don’t plan to make wooden baits your videos have been super helpful and informative thanks a lot man!
I was looking for an exact video like this! Thanks for covering everything man I want to start painting reels But I was wondering if we want to do small designs on the reels , is there a different airbrush or can you tune it in a way that it sprays very thinly ? Not sure If I'm making sense here. Also you should make a video walking us through setting up this exact airbrush set up Also can you recommend a specific moisture trap? A link maybe a name ? I see a ton on Amazon and I'm kinda confhsed.. 91 psi? 150 psi?
I've just taken up miniature painting and looking at air brushes just to do priming and maybe base coats , had to google what you meant by baits lol. I'm honestly so lost what to do now . I was going to get badger patriot 105 , a few videos have recommended them but then I read a comment saying that shipping cost for replacements are as much as the air brush itself and they are going to stop making spare parts (I live in the U.K)
you'd Be good with the iwata HP-CS for priming and base coats. but a cheaper brush would also do just fine for that brotha. I'd Still go with a good grab like Iwata. But u dont need to most expensive. My little brother paints Miniatures and he uses the iwata eclipse HP-CS for every single step and loves it.
Would you spend more money and buy a Iwata hp-ch? Would be my first airbrush , any tips weather to buy a trigger version. See there’s one with the top thumb control and some like a normal paint gun with a trigger . Wanna buy something I’ll enjoy
both. But in my opinion you can accomplish everything needed with the 0.5. i use it for base coats as well as fine detains. really you can accomplish both with both needles. more of a preference. Id say try them both out and see whats more comfortable for your style of painting.
hey man i know im super late on this video i love making fishing lures what do you reccomend the clear coat or resin i use for the baits and airbrush you showed cause im gonna use them and also should i get a blacklight box
Hey man, it depends what kind of baits you are painting. For light bass baits i would say to use something like KBS or aluminite UV clear coat. Because an epoxy would add to much weight to such light baits. If you are painting baits with some weight to them (anything over 1.5-2 OZ I'd say) I personally would use Allumilte amazing clear cast. Epoxy is going to last longer than the others, but adds more weight. so for light baits it can throw off the action of the bait. best epoxy I personally found. I have a video where i show how to epoxy baits if you needed any help with that. Hope this helps!
@@DJCustomBaits thanks my dude im a big bass fisherman so im gonna be making thousands of bass lures out of wood and painting plastic molds of them and now im starting soft plastics to its all fun
@@DJCustomBaits what I meant is the water based paint like the latex paint which has almost the same ingredients as acrylic paint. So is it possible to use latext paint for airbrushing when it is thinned to the right consistency because it is more cheaper than the acrylic. Thank you.
@@93556108 oh yes they'll work for sure. but wont spray as nicely and consistent. I don't think you'll enjoy painting with those to be honest. but yes they will "work"
God damn dude. I started my lure business 4 years ago and I agree with everything you said. I still use that compressor and homely have had zero issues with it. I would like to upgrade to a larger tank compressor at some point. I use the Iwata 90% of the time and use my badger 105 with a larger needle just for base coating. The HPcS is sooo nice
hell yea man. honestly even using my 25 gallon compressor I get just as much moisture coming through my lines as i did with the small one. The singly only thing I have found i like better about using the large compressor is for doing base coats , where you turn your pressure up a bit and are not worried about accuracy and what not. Looking back Id probably rather just invest in another 2 of the zeny pro compressors and run 3 of them at 1 time rather than spend the $500 on the large noisy ass compressor.
Why would anyone start out a sentence with Damming God... SAD... You would lose my business in a heartbeat just because of Using God's name in Vain. but to each his own... you're free speech is known and I don't have a say so... BUT... from a Business Point... I would not do business with you because of what you started out with your sentence. Please don't "Damn God"
gs creos .3 is a better starting airbrush already comes with a Mac valve, just as good also for a starting compressor stealth three gallon at 68 decibels will give you unlimited air for anything you need
The Badger 105 Patriot is every bit as good and half the price. You say if it's under $100 throw it in the garbage? What a load of crap. 😂 Plus it's American made and has the best customer service of any airbrush manufacturer. By the way your regulator on your compressor is mounted at the wrong angle. No wonder you get water in your line. It should be vertical with the clear plastic bowl facing downward.
Hey DJ You mentioned iwata hpcs, but there are other names in there as well. I tried to zoom in to yours on vidio but want to be sure What exactly is name and /or model #. Thanks M L Rogers pasadena,tx
I have an hp-cs and have issues with the gun clogging. When I thin pant I get a lot of over spray. My biggest issue is tip drying issues. I use createx but have had better results with golden and don’t thin it but it’s pricier. Any tips?
if you are having issues with the gun clogging and over spray you are most likely not thinning the paint enough. go thinner, and keep thinning until it sprays nicely. Make sure your lower your air pressure as you thin the paint more. the thinner paint is, the easier it will be to blow out but there is a happy medium. Also if you are mixing paint in your air brush cup it can cause that. I always mix in small plastic dixie cups then pour into my brush. thicker paint would cause a faster tip dry as well. What I use to attempt to eliminate as much tip dry as possible is weimans stainless polish. www.amazon.com/Weiman-Stainless-Cleaner-Polish-Trigger/dp/B007BOEI88 before painting I wipe my needle with it. then I keep a paper towel coated in it. every couple minutes I spin off my needle guard and wipe the tip with it . I keep my air pressure around 20-23 while spraying detailed stuff. and bump it up a little more , closer to 30 for base boats and things that don't require precision. my advise would be set your pressure around 25 , and then dilute paint until it sprays nicely for you. from there its all trigger control. Also if you are not using 4012 reducer you should try it. I wont use any other reducer. www.amazon.com/gp/product/B00CIEA808/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hope this helps brotha!
@@DJCustomBaits I use 4012. So I thinned my paint out more last night even pearls and had better success with createx. I actually reduced my psi to about 15 on a .5 needle and it sprayed fine. If using a .35 maybe bump up the psi. I wasn’t thinning enough. Then I screwed up mixing 4012 with Golden. It caused the paint to get chunky. I never had issues with Golden before just spraying from the bottle. Thanks for the tip on the weimans polish. I’ll definitely try it out.
@@NOturtle ive had that same problem with gold and also White. Its bad batches of the paint. idk if its when it gets cold and warm again but ive had it happen. and pearls are a paint brotha, if you figure out how to get pearls to spray cleanly without spatter let me know haha. Thats why ive always used pearls for everything that doesnt require detail. or if i am using them for detail ill do like a 70/30 mixture of paints. like 70% non pearl, mixed with 30% pearl paint in order to give it the shimmer. for some reason pearl paint is like trying to use single stage auto paint. its spattery as hell
@@DJCustomBaits so I had no issues using pearl. I did add more 4012 similar to 70/30. I tested it on paper starting with the lowest PSI possible to prevent over blowing. Then just bumped it up till it sprayed better. My trick was to do light coats and hit with an heat gun till I got the right glimmer and thickness. It’s a little more tedious but the results are nice especially when you don’t overspray.
@@NOturtle thats your best bet brother. nothing worse then getting 3/4 done with a paint job and it getting ruined by a blow out or spatter. ive always found the lowest air pressure i can spray at tends to be the safest and easiest to accurately paint with.
Lol 1st of all never claimed to be a Professional Air brusher. secondly as I clearly stated "these are my opinions and my opinions only" but thanks for the view dickfor
Welllll Samuel Since you're a Professional... Show us YOUR Video on this subject!!! OR... are you just Rude and Mean by post this "Do not listen to this "professional". If you don't like this video... which I think is GREAT... Then move on... no need to be RUDE
Hey DJ, super video, cheers. I’m. Just getting back into modelling aiming to paint my first 5/6 kits by hand and perhaps treat myself to airbrushing, very helpful video, take care.
I see there are many different opinions amongst professionals about cheap airbrushes are worth it, i see many pro´s use sub 30 dollar brushes.
I wish he would put some links for these products
Yes... That would help.
So I’m in the market for an airbrush to paint my baits and I subscribed when I saw all the baits in the background so I watched the whole video at the end you said it was 8 months bad luck if I don’t like and subscribe and I did before you said that I feel so much better great video man
Thanks brother! I’d say if you can spend the money get an iwata hp-cs . I wouldn’t use anything else after all the brushes I’ve used . But I won’t say that there aren’t cheaper brushes that won’t do that job if you don’t wanna spend the money. They will do the job. But they will also make u frustrated and you’ll eventually spend the money on a good brush. Just my 2 cents bud. For what it’s worth .
@@DJCustomBaits I learned the same lesson with fishing rods 🤷🏻♂️ I am going to get the hp-cs thanks for getting back to me and keep the video coming bait making and fishing 🇺🇸
What bout clear coat? Starting to make spoons for trout fishing bro an want the best clear coat. Whatcha think homie thanks
What your painting makes a huge impact on what brush you need. I pretty much never touch my HP-CS, which is my lowest level brush. At best I'll do a wash or a fade with it. I don't know anything about baits, but for what I do I need a whole other level of tools. Not knocking what you do, making stuff is awesome. Besides painting i also build guitars from scratch. I actually had no idea there was so large a market for painting lures.
I use a NEO and it works great. Thanks on the other info
been painting for 8 months, spray gunner is the best place I've found for price wise on any createx paint. i run the iwata guna buy another and start making some musky lures!
Thx. Very helpful.
Second person I’ve heard recommend that air brush. I plan to make vertical jigs but instead of cheap foil hot pressing I really want to powder glow paint then air brush finer details although I don’t plan to make wooden baits your videos have been super helpful and informative thanks a lot man!
I was looking for an exact video like this!
Thanks for covering everything man I want to start painting reels
But I was wondering if we want to do small designs on the reels , is there a different airbrush or can you tune it in a way that it sprays very thinly ? Not sure If I'm making sense here. Also you should make a video walking us through setting up this exact airbrush set up
Also can you recommend a specific moisture trap? A link maybe a name ? I see a ton on Amazon and I'm kinda confhsed.. 91 psi? 150 psi?
I feel the badger sotar or harder and steenbeck evolution are both better options then any iwata. I havent had any success with any of them.
Where do you recommend to buy good quality stencils from to paint various types of scales on your bait? Thanks for your time.
eBay
What inline moisture trap do you use? I’m having a hard time with water buildup. Thanks.
great tips .. thanks
I've just taken up miniature painting and looking at air brushes just to do priming and maybe base coats , had to google what you meant by baits lol. I'm honestly so lost what to do now . I was going to get badger patriot 105 , a few videos have recommended them but then I read a comment saying that shipping cost for replacements are as much as the air brush itself and they are going to stop making spare parts (I live in the U.K)
you'd Be good with the iwata HP-CS for priming and base coats. but a cheaper brush would also do just fine for that brotha. I'd Still go with a good grab like Iwata. But u dont need to most expensive. My little brother paints Miniatures and he uses the iwata eclipse HP-CS for every single step and loves it.
Would you spend more money and buy a Iwata hp-ch?
Would be my first airbrush , any tips weather to buy a trigger version. See there’s one with the top thumb control and some like a normal paint gun with a trigger .
Wanna buy something I’ll enjoy
I have a question for you do you like the 0.5 over the 0.35 in your iwata eclipse
both. But in my opinion you can accomplish everything needed with the 0.5. i use it for base coats as well as fine detains. really you can accomplish both with both needles. more of a preference. Id say try them both out and see whats more comfortable for your style of painting.
فيديو رائع . استفدت كثيرا
Do you think I can use a luminess makeup airbrush for painting? I do custom shoes.
You are only good as your TOOLS...
hey man i know im super late on this video i love making fishing lures what do you reccomend the clear coat or resin i use for the baits and airbrush you showed cause im gonna use them and also should i get a blacklight box
Hey man, it depends what kind of baits you are painting. For light bass baits i would say to use something like KBS or aluminite UV clear coat. Because an epoxy would add to much weight to such light baits. If you are painting baits with some weight to them (anything over 1.5-2 OZ I'd say) I personally would use Allumilte amazing clear cast. Epoxy is going to last longer than the others, but adds more weight. so for light baits it can throw off the action of the bait. best epoxy I personally found. I have a video where i show how to epoxy baits if you needed any help with that. Hope this helps!
@@DJCustomBaits thanks my dude im a big bass fisherman so im gonna be making thousands of bass lures out of wood and painting plastic molds of them and now im starting soft plastics to its all fun
have you tried using Fantastik cleaner cut with tap water as a cheaper reducer for Createx?
Please tell me whether you can use a normal paint for air brushing? Thank you.
I’ve never tried it, you probably could if u thinned it enough. But it would gum up ur brush for sure
@@DJCustomBaits what I meant is the water based paint like the latex paint which has almost the same ingredients as acrylic paint. So is it possible to use latext paint for airbrushing when it is thinned to the right consistency because it is more cheaper than the acrylic. Thank you.
@@93556108 oh yes they'll work for sure. but wont spray as nicely and consistent. I don't think you'll enjoy painting with those to be honest. but yes they will "work"
@@DJCustomBaits thank you for sharing your thoughts. FYI I am a Chinese, residing in Malaysia. God Bless.
God damn dude. I started my lure business 4 years ago and I agree with everything you said. I still use that compressor and homely have had zero issues with it. I would like to upgrade to a larger tank compressor at some point. I use the Iwata 90% of the time and use my badger 105 with a larger needle just for base coating. The HPcS is sooo nice
hell yea man. honestly even using my 25 gallon compressor I get just as much moisture coming through my lines as i did with the small one. The singly only thing I have found i like better about using the large compressor is for doing base coats , where you turn your pressure up a bit and are not worried about accuracy and what not. Looking back Id probably rather just invest in another 2 of the zeny pro compressors and run 3 of them at 1 time rather than spend the $500 on the large noisy ass compressor.
Why would anyone start out a sentence with Damming God... SAD...
You would lose my business in a heartbeat just because of Using God's name in Vain.
but to each his own... you're free speech is known and I don't have a say so...
BUT... from a Business Point... I would not do business with you because of what you started out with your sentence.
Please don't "Damn God"
gs creos .3 is a better starting airbrush already comes with a Mac valve, just as good also for a starting compressor stealth three gallon at 68 decibels will give you unlimited air for anything you need
never tried either of those brotha, But appreciate the info. 🤙🤙
What about clear coat? Uv? Or just air dry?
The Badger 105 Patriot is every bit as good and half the price. You say if it's under $100 throw it in the garbage?
What a load of crap. 😂
Plus it's American made and has the best customer service of any airbrush manufacturer.
By the way your regulator on your compressor is mounted at the wrong angle. No wonder you get water in your line. It should be vertical with the clear plastic bowl facing downward.
I had a bad experience with the 105. but i do appreciate your input. I am not a pro, simply sharing my opinion. have a good one brotha.
If you were able to paint a 7-8" swimbait to look like a smaller speckled trout how would you do it? Post a video por favor!
Bro why didn’t you put the links for these products ?
Hey DJ
You mentioned iwata hpcs, but there are other names in there as well. I tried to zoom in to yours on vidio but want to be sure
What exactly is name and /or model #.
Thanks
M L Rogers pasadena,tx
What air Compressor do u use
Iwata HPCS? OR IS it APCH?
I’ve had ZERO issues with the master g25....
I really like the Master G25 as well. No issues whatsoever!
Do you reduce all your paints?
I have an hp-cs and have issues with the gun clogging. When I thin pant I get a lot of over spray. My biggest issue is tip drying issues. I use createx but have had better results with golden and don’t thin it but it’s pricier. Any tips?
if you are having issues with the gun clogging and over spray you are most likely not thinning the paint enough. go thinner, and keep thinning until it sprays nicely. Make sure your lower your air pressure as you thin the paint more. the thinner paint is, the easier it will be to blow out but there is a happy medium. Also if you are mixing paint in your air brush cup it can cause that. I always mix in small plastic dixie cups then pour into my brush. thicker paint would cause a faster tip dry as well. What I use to attempt to eliminate as much tip dry as possible is weimans stainless polish. www.amazon.com/Weiman-Stainless-Cleaner-Polish-Trigger/dp/B007BOEI88 before painting I wipe my needle with it. then I keep a paper towel coated in it. every couple minutes I spin off my needle guard and wipe the tip with it . I keep my air pressure around 20-23 while spraying detailed stuff. and bump it up a little more , closer to 30 for base boats and things that don't require precision. my advise would be set your pressure around 25 , and then dilute paint until it sprays nicely for you. from there its all trigger control. Also if you are not using 4012 reducer you should try it. I wont use any other reducer. www.amazon.com/gp/product/B00CIEA808/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hope this helps brotha!
@@DJCustomBaits I use 4012. So I thinned my paint out more last night even pearls and had better success with createx. I actually reduced my psi to about 15 on a .5 needle and it sprayed fine. If using a .35 maybe bump up the psi. I wasn’t thinning enough. Then I screwed up mixing 4012 with Golden. It caused the paint to get chunky. I never had issues with Golden before just spraying from the bottle. Thanks for the tip on the weimans polish. I’ll definitely try it out.
@@NOturtle ive had that same problem with gold and also White. Its bad batches of the paint. idk if its when it gets cold and warm again but ive had it happen. and pearls are a paint brotha, if you figure out how to get pearls to spray cleanly without spatter let me know haha. Thats why ive always used pearls for everything that doesnt require detail. or if i am using them for detail ill do like a 70/30 mixture of paints. like 70% non pearl, mixed with 30% pearl paint in order to give it the shimmer. for some reason pearl paint is like trying to use single stage auto paint. its spattery as hell
@@DJCustomBaits so I had no issues using pearl. I did add more 4012 similar to 70/30. I tested it on paper starting with the lowest PSI possible to prevent over blowing. Then just bumped it up till it sprayed better. My trick was to do light coats and hit with an heat gun till I got the right glimmer and thickness. It’s a little more tedious but the results are nice especially when you don’t overspray.
@@NOturtle thats your best bet brother. nothing worse then getting 3/4 done with a paint job and it getting ruined by a blow out or spatter. ive always found the lowest air pressure i can spray at tends to be the safest and easiest to accurately paint with.
Now I know what to buy with my stimulus check
Createx 4012 Reducer has been discontinued.
topppppppp
The only zeny I see on Amazon for 70$ has no tank
they have raised the price for sure. www.amazon.com/ZENY-Airbrush-Compressor-Airbrushing-Multipurpose/dp/B01M33C8MV
Get rid of the intro music.
no thank you
"anyone".
of course, im only here to debunk this clickbait bullshit
"this brush can do everything", then why the fuck did you have to buy three of them??
Do not listen to this “professional” 😂
Lol 1st of all never claimed to be a Professional Air brusher. secondly as I clearly stated "these are my opinions and my opinions only" but thanks for the view dickfor
Welllll Samuel
Since you're a Professional... Show us YOUR Video on this subject!!!
OR... are you just Rude and Mean by post this "Do not listen to this "professional".
If you don't like this video... which I think is GREAT...
Then move on... no need to be RUDE