Perfect tires for sand, dirt and monster truck look. I just ordered some today for my Everest 10. Mainly just to have fun. With low gearing and gentle landings it might survive. They sure are cool looking tires. If they destroy my E10 I'll hang on to them as a motivation to get the Losi LMT. Hopefully . ✌
I noticed the tires are available in two different compounds. The premounted tires are in the softer compound and are on sale. Great video!!!!! Thanks for taking a hit to make the video! haha
I was surprised your axles lasted as long as they did! I have a feeling part of the reason your not rolling it when turning is because the stock servo saver is so soft that the larger tires are causing the servo saver to give way when under load and cornering. I know mine had that really bad with the widemaxx and 8671 wheels with backflip lp's on them. It was so bad that I couldn't stand near the jump I was hitting because it would just veer off on it's own when it hit the face of the jumps. Ended up with the treal servo saver, traxxas "tubes" for steering and a promodeler servo. Now it turns when I want it to! I thought about getting a set of jconcepts wheels/tires for my slashpede, but never did. Now that I have a set of sledghammers on it, I'm pretty happy. Nice bash session!
Hey reminded me when you drove to Max over that way what's going on with your track by the way you going to finish it I'm retired and have a track in my backyard I couldn't live without it now it's worth the work it's a lot of fun
Hey! Great video as always. Can tout mesure center tire to center tire from left to right. If trying to figure out the offset compare to what i have alreready. Thanks.
Looks great, do they balloon much? Going to finish watching now! Edit,: ok they balloon some! I got a wide kit. HR hub extenders and Proline wheels and tires that put mine right at 17 inches wide! How wide is that?
@@outsourcedrc they say the maxx has a lot of travel left in the shock when it bottoms, because it doesn’t have much travel. If you get longer rod ends, it uses more of the shock travel.
@outsourcedrc sweet mod! I'm not even sure that steel shafts could've survived being clipped by that light pole! If you watch carefully you can see that wheel clips the pole right after the Xmaxx loses control while still traveling fast with a lot of momentum behind it.
@@outsourcedrc I have the pro-line trenchers with the bead locks. I noticed it has a little more trouble moving those. I'm switching to a 54 tooth spur gear to hopefully reduce strain on the electronics and get that same punch that it had on the stock tires. The hobby shop owner told me that the stock tires have been an issue for people so I bought these. I kinda regret the tires but the wheels will be nice to have since they are beadlocks.
Oh, so you're the guy who keeps buying up all the JConcepts wheels. Well, now I have someone to thank for having to stick my SMT10 on 1/10th scale cinderblocks. :P
This looks and sounds like the tires that should come with the car by default. It would be nice having a choice of tires when buying an rc, instead of the one size fits nobody.
Just to let you know I think your rc channel is definitely one of the best and your the reason I bought my lmt! Awesome vids and I always look forward to watching your new ones!!! 💯👍🤘
Thanks for showing this. Great upgrade, FIX, for the MAXX. I wonder how the drive shafts will hold up? TRAXXAS want's you to buy the metal drive shafts with all you need for that, plus the new tries from the new Wide MAXX for $337. So for $127.50 we have a fix. You broke it cuz you hit something. Is it twisting the inside of the driveshaft?
Even on 3s, running my widemaxx with a 20t and 3.8 Talon ext's, it's too much torque. You could probably go up a tooth or two on the pinion if you want more speed. (From experience)
![The Best Tire Upgrade For Your Sledge? [JConcepts Fling Kings]](http://i.ytimg.com/vi/AVdqk2sKIaw/mqdefault.jpg)
Perfect tires for sand, dirt and monster truck look. I just ordered some today for my Everest 10. Mainly just to have fun. With low gearing and gentle landings it might survive. They sure are cool looking tires. If they destroy my E10 I'll hang on to them as a motivation to get the Losi LMT. Hopefully . ✌
Brilliant video. Your enthusiasm is infectious, I'm smiling with you. Keep up the great content. John
Thanks!
I miss your videos. I would be interested in how long the servo holds up with those monster tires !
Great example of how much of a difference new tires can make!
Just stopping by to say awesome. Awesome video. My tires need to be replaced so I might consider these.
Great video....i'm really excited to see a set of these on a Traxxas Maxx 2.0 !!!! SHOULD BE PERFECT !!!!
yeah baby! That gets after it. Nice. I'll have to order some very soon.
Senpai noticed me!
I noticed the tires are available in two different compounds. The premounted tires are in the softer compound and are on sale. Great video!!!!! Thanks for taking a hit to make the video! haha
Awesome video! I love hearing the enjoyment you get from RC's!
Any other truck's days over at 9:43. Gotta love the Maxx for durability. Glad you found a good combo, Sledgehammers weren't a major upgrade IMO.
My Nero used to shrug off landings like that without a problem. That truck was an absolute tank.
yeah this thing really takes a beating
Great video!!! I am getting a set for my MAXX V2 because of you man!! THANKS
I was surprised your axles lasted as long as they did! I have a feeling part of the reason your not rolling it when turning is because the stock servo saver is so soft that the larger tires are causing the servo saver to give way when under load and cornering. I know mine had that really bad with the widemaxx and 8671 wheels with backflip lp's on them. It was so bad that I couldn't stand near the jump I was hitting because it would just veer off on it's own when it hit the face of the jumps. Ended up with the treal servo saver, traxxas "tubes" for steering and a promodeler servo. Now it turns when I want it to!
I thought about getting a set of jconcepts wheels/tires for my slashpede, but never did. Now that I have a set of sledghammers on it, I'm pretty happy.
Nice bash session!
looks like proper monster truck with those, the smile on your face tells the rest :)
Now I need to buy a Maxx just so I can try these tires. Thanks a lot!
They are awesome
Cool tires and awesome bashing brother, cool RC
That’s what I need ❤ my dog is very important to me
I kept breaking drive shafts when I upgraded to a bigger wheel. The steel cvd fixed that.
Me and my family really love your videos, greetings from Sweden ❤❤❤
Thank you so much!
Really enjoyed the video. thank you
the sun looks so nice through the trees there.
That's why I face the camera that way lol
Great info!
Hey reminded me when you drove to Max over that way what's going on with your track by the way you going to finish it I'm retired and have a track in my backyard I couldn't live without it now it's worth the work it's a lot of fun
Looks awesome bro 🔥
My worry would be the added stress those tires and wheels put on the drivetrain and steering servo.
That's why I'm upgrading the drive train.
Man those look amazing!!!
Any recommendations on what gearing to run on the Maxx v2 with big tires? I mean, there decent sized.
Can you put the fling kings on the erevo?
It would be cool if you bought the maxx v2 and made a video comparing the two Maxxs
I'm not spending the money on one just for that. Maybe someone will loan me one.
Looks nice bro , i like a lot, are the tires a lot heavier?
Yes they are. I'm not sure how much, but its a good bit
Hey! Great video as always. Can tout mesure center tire to center tire from left to right. If trying to figure out the offset compare to what i have alreready. Thanks.
Looks great, do they balloon much? Going to finish watching now! Edit,: ok they balloon some! I got a wide kit. HR hub extenders and Proline wheels and tires that put mine right at 17 inches wide! How wide is that?
It's 16 inches wide
Yep, Traxxas should put a 3.8 tires out of the box on the v1 or v2 with widemaxx.
Do the larger tires help with the chassis slap? Great video and information as usual.
Yes they do
Nice tires! Can you try out the rpm extra long rod ends for the maxx? It should make the maxx even less bouncy.
How would this help? Wouldnt it mess up the alignment?
I don't know what you mean.
@@outsourcedrc sorry I was asking how the long rod ends would help.
@@outsourcedrc they say the maxx has a lot of travel left in the shock when it bottoms, because it doesn’t have much travel. If you get longer rod ends, it uses more of the shock travel.
great video but love my V2 maxx and i have old maxx too
Great sir!
hi 👋
thanks for the video 🙂.
this is wheel can this mounted on hexagon of 17?
Hahahhahaha famous last words
“OH NO”
how did you adpt- rims to fit the maxx . rims have a hex and maxx has a cloverleaf
They just mount right up. You can put normal hex shaped Wheels on the Maxx
I want to try those out on my kraton so bad!!! Maxx looks awesome 🤪
U think will work on kraton 6s
Kraton 6S original tire/wheel size
Width: 3.3" (81.5mm)
Wheel hex size: 17mm
Overall diameter: 6.5" (169mm
@@jessegames6714 yes I’m pretty sure the inside diameter is 3.8 or at least close but either way 4s backflips fit both rigs so should fit no problem
@@jessegames6714 yes 3.8 is the outer diameter of the inside of the wheel
They work but be harder on the diffs I often run the LPS backflips to go hard these are fun to tool around
@outsourcedrc sweet mod! I'm not even sure that steel shafts could've survived being clipped by that light pole! If you watch carefully you can see that wheel clips the pole right after the Xmaxx loses control while still traveling fast with a lot of momentum behind it.
The tire came off before it hit the pole. You can use your < and > keys to move frame by frame. The wheel was off before it got to the pole.
I might have missed it, but did you have to change the gearing for those tires?
He went from a 24T to 20T pinion.
Yep.
This is the ultimate Rc in my opinion
I have the maxx v2. Would I still need to go down a tooth on the pinion gear to run the fling kings?
Wondering to
Hello? these would be great on the erevo and kraton, please do a erevo video!
Did you ever try the stock e revo tires on the Maxx, please do
Yes. They fit. They are a tad smaller than these.
had that happen to mine same axle
Awesome
Any issues with those tires coming unglued ???
Yes. I had to reglue them. But since I did that, they have held tight.
Just picked up an x maxx last week and got excited because I thought these tires were for it. lol
lol that would be crazy. Imagine the weight
@@outsourcedrc I have the pro-line trenchers with the bead locks. I noticed it has a little more trouble moving those. I'm switching to a 54 tooth spur gear to hopefully reduce strain on the electronics and get that same punch that it had on the stock tires. The hobby shop owner told me that the stock tires have been an issue for people so I bought these. I kinda regret the tires but the wheels will be nice to have since they are beadlocks.
I’ll send you my v2 maxx to try. Worth a quality video.
Awesome. Maybe I can find someone close to me that will let me show it off.
Oh, so you're the guy who keeps buying up all the JConcepts wheels. Well, now I have someone to thank for having to stick my SMT10 on 1/10th scale cinderblocks. :P
Sorry! Actually I only have..... 5 sets of tires from them.
Awesome video looks really good on the maxx but how hot is the motor getting with these?
He geared down plus its winter they cool as fast as they heat up in the summer .
I didnt check the temp, but the motor wasnt hot when I put the fan back on.
Do you know where I can buy those tires if I live in Europe,
thanks in advance.
No idea. Check their site and see if they can ship them there
This looks and sounds like the tires that should come with the car by default. It would be nice having a choice of tires when buying an rc, instead of the one size fits nobody.
awesome tires :)
THICC MAXX
I like the short wheel base better 🥺
Epic tires 🔥I was wandering, what battery do you use for the maxx?
The one Traxxas made for it. Its a 4s 5000 mah
@@outsourcedrc and it backflips like that? Damn, that's crazy. I really need these tires now 😅
You ever mess with your smt10 anymore?
I drive it every once in a while. I just don't film it.
Just to let you know I think your rc channel is definitely one of the best and your the reason I bought my lmt! Awesome vids and I always look forward to watching your new ones!!! 💯👍🤘
Will those tires fit a e revo or a emaxx?
yes, but they are smaller than the stockers
Will they fit on the e-revo?
I don't know. Maybe I'll try them on
@@outsourcedrc please do that
What this tires bro 😍🦇
Link is in the description!
Heed my warning. Running them puts you at risk of burning the stock esc and reciver up. I ran them on mine and the extra stress was just to much.
Nice man
Put theme on the wide maxx =)
Crazy Wide Maxx!
Thanks for showing this. Great upgrade, FIX, for the MAXX. I wonder how the drive shafts will hold up? TRAXXAS want's you to buy the metal drive shafts with all you need for that, plus the new tries from the new Wide MAXX for $337. So for $127.50 we have a fix. You broke it cuz you hit something. Is it twisting the inside of the driveshaft?
Those cvds on ebay seem to be good 60 bucks for all four and comes with collars
You should make a track in your yard
I appreciates you spending the money before I do 😁
lol welcome
Even on 3s, running my widemaxx with a 20t and 3.8 Talon ext's, it's too much torque.
You could probably go up a tooth or two on the pinion if you want more speed. (From experience)
😉👍💯
Definitely make it more tame and fun to drive
It really does.
Those look like they belong on that truck!
Mashers
Will these work on the XRT?