Great to know about the back brushing. You're videos are great. I've been watching all of them. I've just started offering painting, and your videos are incredibly educational. I couldn't do it without your help. You've been my trainer and I am sooooo excited to get painting 😎😎😎
Super Deck is a great Product. Used it for many years up in the Lake Tahoe area. If I remember correctly the pigments still used to settle a bit and we would shake or stir the product before use. We would also block the back side of an open fence area regardless of the transfer rate of the application since there will be a partial possibility of overspray reaching the other side. It was always a safe way for us. I hate the possibility of liability. Nice video you made. Thanks
WOW!! Almost 100,000,000 views Chris!! Nice job through the years and again here with a lot of information in a short time (respectively)! Congratulations and keep up the good work! Also, you might have them recount because I think I have watched close to 20,000,000 views from your video library myself and I know there has to be more then 5 of us out here! 😂
I pressure wash with Simpson 2400 or so psi using 2.5 gpm with white tip. I have an 8 foot cedar fence and I go up and down twice for each picket. I use a graco xr 17 and have used wood defender cedar tone transparent oil based stain. It looks brand new. Now around 10 years old. I’ve seen a guys RUclips video where he using his own caustic removers while washing around 5gpm. I don’t have that much to have a pro stain machine. Thanks for your tips on painting and staining.
OMG - My pressure washer is always losing pressure and and spluttering. Now I know I just need to run the water through without the tip on to get the air out. Man, I wish I knew this years ago LOL. #gamechanger -- thanks so much
Mabie i havnt followed long enough but you are my online favorite painter.i havnt invested in a sprayer yet but i will have itnsoon..i write downcthe pais the notes the routines you have helpd brought food on my familys table quicker then i originally intended..thankyou
I'm a professional painter for over 40 years. Just my observation through experience. Back rolling exterior wood is not the same or as beneficial as back brushing. I do like your mechanics
Do you need to power wash a new fence before the staining? I noticed that some cedar pickets I'm using have a lot of wooden dust on them and some have light green-blue spots, like moss. Or that dust doesn't matter and you can apply the stain on those pickets? Thank you for the informative film.
You should stain within 4-6 weeks after installed using a penetrating oil based stain. It is not necessary to clean your fence prior to staining unless it has started to grey or develop organic growth. A pressure treated pine will have green pigment in the panels… after 4-6 weeks Apply a semi- trans Pecan or Chestnut & it will look amazing!!!
@@Thestainxpert I did it already in Fall. I applied like after 2-3 weeks, since it is in Dallas TX. Everything looks very good, but thank you for the advice. Actually I did a half, the rest I'll do this Spring-Summer (some trees are on the way). Thank you again.
I just painted a staircase with 70 spindles and runners. Estimated 1 gallon primer & 2 gallons sw urethane trim semi gloss, only needed 1 gallon urethane paint but it looked great. What tricks do you have to not get the runners with over spray. I used graco procomp Hvlp.
nice video. thanks. Be safe and wear your respirator. You could just narrate and talk us through with a voiceover and explain what you are doing when you are doing the multi-tasking jobs. Just a suggestion.
I saw a guy that did power washing as his job and he threw some product on the fence and magically the mole or grime was disappearing.after just power washed the fence🧐
Hello , love your videos . I have some questions for you. I have a new fence that I painted 3 years later the slots are rotten away where the nails are in the cross wood. The fence guys said it’s the paint? Berh gave me a cleaner called 63 said to wash the whole fence and repaint the new replaced pieces with the old painted fence ..what could I’ve done wrong painting a new wood fence? What would make the wood rot under the paint? Should I try to pressure clean strip the paint off the fence before using the berh 63 and the paint ? I can’t believe my fence is disintegrating after only 3 years . Please help !
Water based doesn't last as long as it can dry out and flake off. Oil based stays in the wood and protects it much longer also doesn't flake. Ask me how I know.
That turbo tip will tear up your wood. Never use the turbo tips only flat and stay back about 6 inches and move quickly. Better to go over it twice than tear up the soft wood from the hard grain..
how would i go about painting an already painted fence ? should i pressure wash it using a rotating nozzle and then just respray it or do i need to do a light sanding and then restain it ? thansk in advance. btw im trying to redo a red stained fence to white. any recommendations?
i have a question. i have someone who has a fence that is already stained with a water base. they want to re stain the fence with the same stain. there is some flaking on the bottom of the fence and just normal wear. can i clean the fence, and re stain, or will i need to strip the fence beforehand? stain is behr premium acrylic. thanks!
Is it worth me strating up my own fence/deck stain business? Im so tired of working for other people. I have zero experience in sprain fences and decks. So with that said Anybody out there got an answer and maybe willing to help me out..
You always want to use a penetrating oil based stain over waterbased every time. A penetrating oil will outperform a waterbased stain all day long A penetrating oil provides nourishment to the wood & brings out the true beauty of its character. Waterbased stain sits on top of surface & eventually fails (peal, chip, flake, etc) which means you get upset years down the road. Most contractors go Waterbased because it’s less of a hassle, easier in and out (profitability) & easier to purchase. A true “penetrating oil” based stain requires you to do a little more research finding the right company (SSE) & order in advance (2-3 days) which is nothing when it comes to staining 😀
lol. All those fences were beautiful BEFORE you stained them. I dont even consider a stain a stain if it looks like paint afterwards. I did pick up good tips about spraying though.
Seeing people attack fences with high pressure is super cringe to me as a professional powerwasher.. other than that i like your videos, they are great.
Bakers Gray Away lasts 5 years is oil base. Nice educational videos I recommend your channel to ppl.
Thank you for your hard work.
Great to know about the back brushing. You're videos are great. I've been watching all of them. I've just started offering painting, and your videos are incredibly educational. I couldn't do it without your help. You've been my trainer and I am sooooo excited to get painting 😎😎😎
How long did yr painting career last! It's been 4 years
You could not wait to start
@Yoyoyo224 Painting every day, it's been great!! A bit of a slow start but we are doing great 😊
I came here to learn and this whole crew and video is top notch, THANKS!
Super Deck is a great Product. Used it for many years up in the Lake Tahoe area. If I remember correctly the pigments still used to settle a bit and we would shake or stir the product before use. We would also block the back side of an open fence area regardless of the transfer rate of the application since there will be a partial possibility of overspray reaching the other side. It was always a safe way for us. I hate the possibility of liability. Nice video you made. Thanks
WOW!! Almost 100,000,000 views Chris!! Nice job through the years and again here with a lot of information in a short time (respectively)!
Congratulations and keep up the good work! Also, you might have them recount because I think I have watched close to 20,000,000 views from your video library myself and I know there has to be more then 5 of us out here! 😂
You do a great job and have all the right tools.
Best and most informative video. You answered everything I was questioning. Thank you!
I pressure wash with Simpson 2400 or so psi using 2.5 gpm with white tip. I have an 8 foot cedar fence and I go up and down twice for each picket. I use a graco xr 17 and have used wood defender cedar tone transparent oil based stain. It looks brand new. Now around 10 years old. I’ve seen a guys RUclips video where he using his own caustic removers while washing around 5gpm. I don’t have that much to have a pro stain machine. Thanks for your tips on painting and staining.
OMG - My pressure washer is always losing pressure and and spluttering. Now I know I just need to run the water through without the tip on to get the air out. Man, I wish I knew this years ago LOL. #gamechanger -- thanks so much
Me too had no clue! Thanks for the tip.
Great tips, Definitely I need to get a rotating striping nozzle. THANK YOU.
Mabie i havnt followed long enough but you are my online favorite painter.i havnt invested in a sprayer yet but i will have itnsoon..i write downcthe pais the notes the routines you have helpd brought food on my familys table quicker then i originally intended..thankyou
Amazing video friend!!! Thumbs way up. Thank you.
Beautiful video my friend. Learn alot.
Glad to help
Yess I enjoy your videos , thanks ! From Belle River Ont .
Que bonito el trabajo brother DIOS TE BENDIGA siempre
Very nice hello again from Texas.🤠👋
Cleburne Tx
I'm a professional painter for over 40 years. Just my observation through experience. Back rolling exterior wood is not the same or as beneficial as back brushing. I do like your mechanics
You have a point
Do you need to power wash a new fence before the staining? I noticed that some cedar pickets I'm using have a lot of wooden dust on them and some have light green-blue spots, like moss. Or that dust doesn't matter and you can apply the stain on those pickets? Thank you for the informative film.
I’m
You should stain within 4-6 weeks after installed using a penetrating oil based stain.
It is not necessary to clean your fence prior to staining unless it has started to grey or develop organic growth.
A pressure treated pine will have green pigment in the panels… after 4-6 weeks
Apply a semi- trans Pecan or Chestnut & it will look amazing!!!
@@Thestainxpert I did it already in Fall. I applied like after 2-3 weeks, since it is in Dallas TX. Everything looks very good, but thank you for the advice. Actually I did a half, the rest I'll do this Spring-Summer (some trees are on the way). Thank you again.
@@olenaerhardt7725
Good deal 😀
Happy to hear 👏
What steps should I take when staining a fence that's been stained already? It was stained over 10 years ago.
Great Video! Have you ever stained a patio cover? That is my next project.
I have
What's the point of spraying if you have to use a brush also?
I just painted a staircase with 70 spindles and runners. Estimated 1 gallon primer & 2 gallons sw urethane trim semi gloss, only needed 1 gallon urethane paint but it looked great. What tricks do you have to not get the runners with over spray. I used graco procomp Hvlp.
nice video. thanks. Be safe and wear your respirator. You could just narrate and talk us through with a voiceover and explain what you are doing when you are doing the multi-tasking jobs. Just a suggestion.
You got paint on the neighbors blue shed hope they don't see it:) great video!
Opps
Where did she get those pants?? love love love!!
If your spraying only one is there an issue getting stain on the neighbors side?
how mauch does it cost to stain a shodow box fence? 6 ft 1089 sq ft
I saw a guy that did power washing as his job and he threw some product on the fence and magically the mole or grime was disappearing.after just power washed the fence🧐
What about ‘good neighbor’ fences where you can only paint your side of the wood? Please help!
Hello , love your videos . I have some questions for you. I have a new fence that I painted 3 years later the slots are rotten away where the nails are in the cross wood. The fence guys said it’s the paint? Berh gave me a cleaner called 63 said to wash the whole fence and repaint the new replaced pieces with the old painted fence ..what could I’ve done wrong painting a new wood fence? What would make the wood rot under the paint? Should I try to pressure clean strip the paint off the fence before using the berh 63 and the paint ? I can’t believe my fence is disintegrating after only 3 years . Please help !
Thankyou , yess I need a rotating nozzle also , is 2000 psi efficient?
Water based doesn't last as long as it can dry out and flake off. Oil based stays in the wood and protects it much longer also doesn't flake. Ask me how I know.
Gracias por ese vídeo muy bueno.
That turbo tip will tear up your wood. Never use the turbo tips only flat and stay back about 6 inches and move quickly. Better to go over it twice than tear up the soft wood from the hard grain..
Where can I buy 5 gallon buckets of water based stain? What brand do you use?
TopBoy
Respect 🇬🇧
How much do you charge per linear foot or by square ft
how would i go about painting an already painted fence ? should i pressure wash it using a rotating nozzle and then just respray it or do i need to do a light sanding and then restain it ? thansk in advance. btw im trying to redo a red stained fence to white. any recommendations?
No sand just paint you will ready to go not a big deal just , power wash and wen its dry enough, stain
Do you use the same airless for water and oil ? Or use separate machines?
Did the grass die in the places you didn’t cover it ?
Nope
Any specifics if you are re-staining a fence? I am using a water-based stain.
i have a question. i have someone who has a fence that is already stained with a water base. they want to re stain the fence with the same stain. there is some flaking on the bottom of the fence and just normal wear. can i clean the fence, and re stain, or will i need to strip the fence beforehand? stain is behr premium acrylic. thanks!
Is it worth me strating up my own fence/deck stain business? Im so tired of working for other people. I have zero experience in sprain fences and decks. So with that said
Anybody out there got an answer and maybe willing to help me out..
I would suggest working for someone else that does that gaining the knowledge and experience and then work for yourself
What water based stains for fences do you recommend since you don’t recommend oil based?
You always want to use a penetrating oil based stain over waterbased every time.
A penetrating oil will outperform a waterbased stain all day long
A penetrating oil provides nourishment to the wood & brings out the true beauty of its character.
Waterbased stain sits on top of surface & eventually fails (peal, chip, flake, etc) which means you get upset years down the road.
Most contractors go Waterbased because it’s less of a hassle, easier in and out (profitability) & easier to purchase.
A true “penetrating oil” based stain requires you to do a little more research finding the right company (SSE) & order in advance (2-3 days) which is nothing when it comes to staining 😀
What is a good stain for redwood
How much do you pay people that work with you? on average for painting per hour? id like to know what the average price range is when hiring people.
Are you sealing as well? Does it matter?
Good morning I have a question for you please if have a 10 pallets of fence 8x8 how many gallon of stain can cover that inside and outside
I have no idea how many pickets that is
Ok it's a pickets fence form post to post is 8 feet the hight is 8 feet I have 10 pallets
Do you clean your brushes to reuse again? If you use an oil base stain do you reuse brushes?
No
So what's your favorite water based for semi trans. And do you ever seal over oil or wb
ArborCoat
Is there anyway or any paint gun that will eliminate back brush?
A self leveling penetrating oil from SSE
Y no se puede usar rol en lugar de brocha?
lol. All those fences were beautiful BEFORE you stained them. I dont even consider a stain a stain if it looks like paint afterwards. I did pick up good tips about spraying though.
Thumbnail looked like older John cena
Can you back roll it instead of back brushing it?
No just brush out
What price is an average price per linear ft. Wash? Stain?
For me I price per sq ft. I'll usually price $1.55 ft2 for both. Keep in mind I'm in Southern Indiana and I don't have a lot of overhead.
John 3:16
👍
Question? Do you do both sides of the fence?
If I am paid to
@@Idahopainter lol
Olá Paint Live Bom dia ! Muito muito bom, sou seu FÃ! Um abraço amigo ! BRAZIL RIO DE JANEIRO .LIKe
Seeing people attack fences with high pressure is super cringe to me as a professional powerwasher.. other than that i like your videos, they are great.
What do you use as a professional power washer then? I’m curious
Very good video. SAFETY! The person pressure washing is not wearing goggles.??
OK
Y esa pistola sé usa con un compresor?
No es de luz
Your eyes are VERY important! Aerosolized stain can harm your eyes! Goggles, important!!
OK
Why do you never use rollback? It doesn't look professional
Galatiana 2:20
Sprayimg stain. What could go wrong? 😂
🇺🇸👍🇺🇸😷
save money. 50% used motor oil, 50% diesel. Lasts for years and it's cheap.
Never stain a fence. It will become a maintenance item you have to keep doing.
Do not pressure wash a fence wtf you doing smh... just use chemical that through a xjet works wonders your destroying that fence with pressure
Boring😳
Clown❤