Thanks for reaching out, Kyle! We have several new models launching soon that are configured with different weapon lights for different firearms. Stay tuned for updates shortly!
Just found your video i been searching for a bolt on comp for my springfield xdm elite 10mm. I usually run oolights under my barrels but the one u have on this is in a set location but the one i like the best for pistols has that ability to slide back against your trigger gaurd after u connect it to the rail before u lock it it rides on a slide that goes a half inch foward and backwards. I think its the oolight Knight but i gonna have to take a look to know for sure. Are these caliber specific like when ordering u pick from a list or are they all reamed out to a 45 hole? Been looking for one specifically for my springfield and could never find one cause i kept forgetting the most important word universal. Have u messed around with the size of your gas release point on your comp like if u made one with a oversized hole for the gas to travel upward out the barrel from would it change anything or is it like a plateau once gas gets going upward the hole size doesnt change how much recoil is suppressed or does a smaller opening actually make it hold the nose down better cause of higher pressure or something. Figure u prob tried 20 different hole sizes before u came up with the final product was just interested to know what u discovered cause it seems pretty interesting to me so thought id ask.
Thanks for reaching out! We appreciate your interest in our products. Our compensators are indeed caliber and gun-specific, designed to provide optimal performance for each setup. And yes, we tested the size of the hole for the gas to travel and optimized it based on our testing. The size of the gas port plays a crucial role, and after extensive testing, we found the perfect balance to effectively reduce recoil and muzzle rise. While we don't currently make a compensator for the Springfield XDM, we appreciate your feedback and will pass it along to our design team. If you have any more questions or suggestions, feel free to share!
The surefire X300 cost $300+, the comp is $150. Boss, please design a standard picatinny rail size to picatinny for universal use. I'm a no-go on the X300. Love where you're going with this, adaptable is the future.
We appreciate that! Options are never a bad thing and there are preferences for everything gun-related. In this case light-mounted comps are preferred for some while non light-bearing comps are great for others. A lot of people already own the X300 and the TLR-7 Sub, so the comp was an easy add-on. There is a lot of time, money and effort going into the development of each model before release and there will be additional non light-bearing models coming down the road.
@@VantagePointArmory looking forward to that. We are ready to buy your upcoming non-light bearing comp model. Just snap on the G19 frame and good to go. Thank you.
Thanks for reaching out! This model is on our tentative design list but we have several other compensators that will be in production prior to this. Stay tuned!
Thanks for reaching out Billy! We currently have rail-mounted models available for the Beretta Px4 Compact and Full. We are planning to launch a Rail-Mounted Comp for the P365 and P320. More to come - stay tuned!
Thanks for reaching out, Shane! Yes - we currently offer a Rail-Mounted Compensator for the Beretta PX4 Full and Compact (no light required). We have plans to make more rail-mounted compensators for other firearm models soon.
This looks pretty dope. I need one for my P320 Carry & TLR-1 HL pretty please. Do you know if they're compatible with Safariland holsters like the 6304RDS?
Thanks for the suggestion, this has been discussed by our team. The potential issue is leaving enough material to avoid the "fins" snagging when drawing the gun.
We tested it in a couple brands including JM Custom and it was so close! A little heat was required to make it fit securely. We are in the early stages of developing holsters built specifically to accommodate our gun/comp configurations. Those will be available at vparmory.com!
@@memedealer171 We don't have a timeline yet. There is a lot more engineering and design work that goes into the TLR-1 and regular TLR-7 lights since they only have one moveable jaw to connect to the rail. We have to maintain holster compatibility as well.
Thanks for reaching out, Matt! We appreciate your interest in our product and have passed your feedback along to our design team. Please don't hesitate to reach out if you have any questions.
It is a possibility and has been discussed! The single port makes the G19 as long as the G17, so holster fit isn't an issue with standard light bearing holsters. Making it longer would require custom holsters, but that is a possibility as well!
Just as I was thinking about this design for Glock compensator they actually already made one 😅, only two possible drawbacks for this design is how effective is it and does it cause warping to the frame after extended usage
It is effective, feedback from all of our testers has been positive. Frame damage isn't a concern as the comp only adds .9 ounces and the rails are exactly like the X300. As long as a pistol rail would last with an X300 attached is how long it would last with the comp/light combo attached.
Great info... and, none of my business but if you have not had your heart checked please do so. Your fingernails possibly indicate an issue. I have similar problems so please get a cardio check up if you have not.
All of the. Streamlight models , SureFire xc1 , olight mini valkyrie
Sig model, Springfield, and smith&wesson firearms
Thanks for reaching out, Kyle! We have several new models launching soon that are configured with different weapon lights for different firearms. Stay tuned for updates shortly!
Great innovative product that can be refined over time! Please make one for the P226!
tlr7a glock 29 comp would be dope
Just found your video i been searching for a bolt on comp for my springfield xdm elite 10mm. I usually run oolights under my barrels but the one u have on this is in a set location but the one i like the best for pistols has that ability to slide back against your trigger gaurd after u connect it to the rail before u lock it it rides on a slide that goes a half inch foward and backwards. I think its the oolight Knight but i gonna have to take a look to know for sure. Are these caliber specific like when ordering u pick from a list or are they all reamed out to a 45 hole? Been looking for one specifically for my springfield and could never find one cause i kept forgetting the most important word universal. Have u messed around with the size of your gas release point on your comp like if u made one with a oversized hole for the gas to travel upward out the barrel from would it change anything or is it like a plateau once gas gets going upward the hole size doesnt change how much recoil is suppressed or does a smaller opening actually make it hold the nose down better cause of higher pressure or something. Figure u prob tried 20 different hole sizes before u came up with the final product was just interested to know what u discovered cause it seems pretty interesting to me so thought id ask.
Thanks for reaching out! We appreciate your interest in our products. Our compensators are indeed caliber and gun-specific, designed to provide optimal performance for each setup. And yes, we tested the size of the hole for the gas to travel and optimized it based on our testing. The size of the gas port plays a crucial role, and after extensive testing, we found the perfect balance to effectively reduce recoil and muzzle rise.
While we don't currently make a compensator for the Springfield XDM, we appreciate your feedback and will pass it along to our design team. If you have any more questions or suggestions, feel free to share!
@@VantagePointArmory appriciate that maybe one day theyll be one for the XDM elite at which time I'll be back.
The surefire X300 cost $300+, the comp is $150. Boss, please design a standard picatinny rail size to picatinny for universal use. I'm a no-go on the X300. Love where you're going with this, adaptable is the future.
Yeah, unless you already have a x300 you'd probably be better off just getting your slide comped
We appreciate that! Options are never a bad thing and there are preferences for everything gun-related. In this case light-mounted comps are preferred for some while non light-bearing comps are great for others. A lot of people already own the X300 and the TLR-7 Sub, so the comp was an easy add-on. There is a lot of time, money and effort going into the development of each model before release and there will be additional non light-bearing models coming down the road.
😮@@VantagePointArmoryplease make a non-light bearing comp. Really interested In that. Not everyone can afford the X300U-A. Thank you.
@@hcasal777 We have some new models in the works - stay tuned!
@@VantagePointArmory looking forward to that. We are ready to buy your upcoming non-light bearing comp model. Just snap on the G19 frame and good to go. Thank you.
Would love to see this for the SA Hellcat Pro. TLR1, TLR7, and TLR8
Thanks for reaching out! This model is on our tentative design list but we have several other compensators that will be in production prior to this. Stay tuned!
This compensator looks legit! I believe the comp you guys sent to me to review for my channel has finally arrived so I can’t wait to try it out!
How long until we see them without the light mount just the compensator
Thanks for reaching out Billy! We currently have rail-mounted models available for the Beretta Px4 Compact and Full. We are planning to launch a Rail-Mounted Comp for the P365 and P320. More to come - stay tuned!
AWESOME PRODUCT!!! PLEASE DO ONE FOR THE SPRINGFIELD XD SERIES FULL SIZED AND COMPACT!!!
Need one for every gun model
We've got numerous designs in our queue 👏
Has there been any models that don't require a light?
Thanks for reaching out, Shane! Yes - we currently offer a Rail-Mounted Compensator for the Beretta PX4 Full and Compact (no light required). We have plans to make more rail-mounted compensators for other firearm models soon.
@@VantagePointArmory sorry should have been more specific for Glock models
Easy buy, need 4 now. I've been looking for this for so long. Is there an option for additional weight? G19 and Sig320 please
No additional weight option, but the 320 is in development now!
This looks pretty dope. I need one for my P320 Carry & TLR-1 HL pretty please. Do you know if they're compatible with Safariland holsters like the 6304RDS?
Several gun/light/comp models have been tested in several Safariland holsters, but unfortunately there is no way to test all of them.
You need to design some that fit specifically the Gen 5 Glocks with the “fins” to overlap the slide chamfering/bull nose 💪🏻
Thanks for the suggestion, this has been discussed by our team. The potential issue is leaving enough material to avoid the "fins" snagging when drawing the gun.
What owb & iwb holsters will work with your standalone comp (no light) for the px4 full-size & the px4 compact?
We tested it in a couple brands including JM Custom and it was so close! A little heat was required to make it fit securely. We are in the early stages of developing holsters built specifically to accommodate our gun/comp configurations. Those will be available at vparmory.com!
Yes I can confirm rail mount is a no go in a JM custom or Teir1 . Would have bought the trl7 version had I known I was buying new holsters.
@@VantagePointArmory cool, hopefully you can get them out before Landon finishes my custom px4 😆
What about a version for the CZ P-10C?
Thanks for reaching out! We do not have any plans currently for a comp model for the CZ P-10C, but I will pass your feedback along to our design team.
Would be great to have a version for the midsize Glocks (19 etc.) with theTLR-1
They are in queue!
@@VantagePointArmory any idea when you fellas are releasing the tlr1 comps?
@@memedealer171 We don't have a timeline yet. There is a lot more engineering and design work that goes into the TLR-1 and regular TLR-7 lights since they only have one moveable jaw to connect to the rail. We have to maintain holster compatibility as well.
Will it fit Shadow Systems?
The comp locks onto the rail of the Shadow System frame, but we haven't tested fit or function on them. We have discussed testing the comp on SS guns.
I'd buy again if you offered the px4 gsd no light version in Sniper Gray.
Thanks for reaching out, Matt! We appreciate your interest in our product and have passed your feedback along to our design team. Please don't hesitate to reach out if you have any questions.
I need this for the FN 509 & 510 since I can't have a threaded barrel in my city 😕
With the TLR7 of course
Thanks for your feedback! I will pass it along to our design team. We appreciate it.
Do you think you guys would ever add length and make it a dual port?
It is a possibility and has been discussed! The single port makes the G19 as long as the G17, so holster fit isn't an issue with standard light bearing holsters. Making it longer would require custom holsters, but that is a possibility as well!
@@VantagePointArmoryLooks like an awesome product! I can see these being very useful for G20 and G29 in 10mm down the road.
@@cbbees1468 10mm options are on the board, so stay tuned!
Just as I was thinking about this design for Glock compensator they actually already made one 😅, only two possible drawbacks for this design is how effective is it and does it cause warping to the frame after extended usage
It is effective, feedback from all of our testers has been positive. Frame damage isn't a concern as the comp only adds .9 ounces and the rails are exactly like the X300. As long as a pistol rail would last with an X300 attached is how long it would last with the comp/light combo attached.
I know everyone has said it, but I’d be thrilled to order a G17 x300 option
Stay tuned - we've got something in the works!
Which calibers will the PX4 models be compatible with?
Initial launch will be compatible with the 9mm and 40 S&W, the 45 ACP comp has been tested and will be available later.
@@VantagePointArmorywill there a version for the Glock 20/21 available in the future
@@urbantea9696 Absolutely!
@@VantagePointArmory thank you for your hard work and bestowing this upon us we are grateful
P10c?
Springfield XD's?
Thanks for reaching out! We don't have that in our immediate design lineup but I will pass your feedback onto our design team.
One for the Glock 17 gen 3…. I’m flabbergasted ones not available. I’m tired of the g19
Thanks for reaching out! We are working on a design for the G17. Stay tuned!
Mossberg MC2 series, please.
Had a great meeting with the Mossberg folks at SHOT! They are on the way.
Need a G17 model as well
It's in the queue!
Nice backstrap install...
Glock 22 without a light.
WALTHER PDP ALL SIZES
We had a great meeting with Walther at SHOT Show, keep an eye out for info on the PDPs!
I legit may wait for the pdp version to come out before I buy my next carry gun...
@VantagePointArmory how has the come to fruit In the last 4-6 months. Thanks
Great info... and, none of my business but if you have not had your heart checked please do so. Your fingernails possibly indicate an issue. I have similar problems so please get a cardio check up if you have not.