What Happens When You Install a Turbo Backwards?

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 1,2 тыс.

  • @Life_OD
    @Life_OD  3 года назад +1

    Check this out !! We made a MOPED powered CAR : ruclips.net/video/MS4itA1dSjA/видео.html

  • @Mr.Frost720
    @Mr.Frost720 5 лет назад +329

    The moment you went into the hardware store I knew a quality install was coming.

  • @6bettyboo9
    @6bettyboo9 5 лет назад +387

    I wanna see performance mods on the lawnmower car . Clutch, jetting ,exhaust and a top speed run !

    • @DavidMirandaF
      @DavidMirandaF 5 лет назад +10

      That'd be fire!

    • @6bettyboo9
      @6bettyboo9 5 лет назад +15

      David Miranda ikr maybe put a turbo on it too lol !

    • @roses_rebirth_2563
      @roses_rebirth_2563 5 лет назад +11

      @@6bettyboo9 it's 1 cylinder so it probably couldn't take a turbo very well. There are upgrades that can be made to those engines though

    • @6bettyboo9
      @6bettyboo9 5 лет назад +2

      Mister_Merxy _ I’m sure a turbo plumbed backwards works perfectly too lol 😂 not really the point . Build break repeat did a turbo and they dyno’d it made a bit more power.

    • @Uizzj
      @Uizzj 5 лет назад +4

      @@6bettyboo9 Got a buddy with a 700cc swapped lawnmower. Pops wheelied in 5th gear. Ill try to get pictures and update the thread next time i see it.

  • @derrickwidner00
    @derrickwidner00 5 лет назад +571

    His beard is coming in ...good to know he growing physically

    • @KableTac
      @KableTac 5 лет назад +5

      i wouldnt exactly call that a beard. thats just baby pubes. im sure he trims it like that because the rest looks like someone going through chemo

    • @thatboostedlife
      @thatboostedlife 5 лет назад +5

      And mentally

    • @Ju4n6tre
      @Ju4n6tre 5 лет назад +2

      😂😂😂😂

    • @clcampbell85
      @clcampbell85 5 лет назад +1

      all that jizz is working like miracle grow👌🏻

    • @Az480709
      @Az480709 5 лет назад

      Young dumb and full of...... boost

  • @JohnStax98
    @JohnStax98 5 лет назад +721

    Next Video: What happens when you install a Turbo frontwards.

    • @simplelife1741
      @simplelife1741 5 лет назад +113

      JohnStax what happens when you install a turbo squidwards

    • @ZOKA__
      @ZOKA__ 5 лет назад +64

      Wasted Nature what if you put exhaust pipe straight to intake pipe

    • @savagetuner2404
      @savagetuner2404 5 лет назад +9

      JohnStax Subtitle: IT ACTUALLY WORKS?!?

    • @AdamsWorld84
      @AdamsWorld84 5 лет назад +2

      dumb.

    • @Talos_Valcoran87
      @Talos_Valcoran87 5 лет назад +8

      I'm pretty sure the next video is going to be "What happens when you install a turbo inside out!"

  • @naytattoos1239
    @naytattoos1239 5 лет назад +166

    Chris rod knock is still number one in my book

    • @denisc958
      @denisc958 5 лет назад +12

      Agreed!

    • @user-rv3jh8vw8k
      @user-rv3jh8vw8k 5 лет назад +4

      Chris rod knock don’t got a fd license tho

    • @naytattoos1239
      @naytattoos1239 5 лет назад +4

      The onion is scared of New world order and FEMA camps lmao

    • @linuxtuxvolds5917
      @linuxtuxvolds5917 5 лет назад +2

      Rod knock is my favorite band

    • @orlandot3944
      @orlandot3944 5 лет назад +8

      @@user-rv3jh8vw8k you are correct, rudnick doesnt have a fd license nor a stick up his ass.

  • @devinstepp4205
    @devinstepp4205 5 лет назад +49

    It caused the most pain when he was dremeling the intake on the turbo and having all the shavings drop into the turbine

    • @janedoeski6333
      @janedoeski6333 5 лет назад +2

      Shits mint

    • @Camlikesbmxbiks420
      @Camlikesbmxbiks420 5 лет назад +1

      bro its an ebay turbo theyre going to use one time on this car.. its not like it was going to last anyway.

    • @yaboikungpowfuckfinger7697
      @yaboikungpowfuckfinger7697 5 лет назад

      You can see at 5:50 the shavings were shot out because the turbo was installed backwards

  • @Havok412
    @Havok412 5 лет назад +169

    I watch these videos in a span of 10 seconds. 3 part. Start->sparsk flying welds happening->Burnout Turbo noises
    Ok sweet it worked.

    • @mrolsen6987
      @mrolsen6987 5 лет назад +12

      Same here, everything in between is just too annoying😂

    • @enigma9789
      @enigma9789 5 лет назад +1

      Thats me on basically every video on youtube that is longer than 5 mins.

    • @enigma9789
      @enigma9789 5 лет назад +4

      @Swampy Oh dang, this video was filled with knowledge and important information that i skipped over? Wow, think of all the good I could do from this knowledge that i didn't listen too.
      Oh well, on to skip some more drawn out bullshit.

    • @xRipeh
      @xRipeh 5 лет назад +1

      Literally me n my friend's were discussing how these videos last about 15 seconds I just skip through everything lol

    • @enigma9789
      @enigma9789 5 лет назад +1

      @Swampy What does your comment say after the part that says "read more"?

  • @stokedbrokeandouttaluck4972
    @stokedbrokeandouttaluck4972 5 лет назад +282

    Your sweater looks like one of them cups you get at a pizza joint in the late 90s early 2000s

    • @ligmasurvivor997
      @ligmasurvivor997 5 лет назад +95

      *T H A T S T H E J O K E*

    • @KableTac
      @KableTac 5 лет назад +32

      its just an oversized hoodie on an ethiopian body frame. its part of the douchebag starter pack

    • @doctordewbie7681
      @doctordewbie7681 5 лет назад +8

      Dart Jazzed Waxed Paper Cold Cups. AKA Dixie Cups

    • @hectorramirez880
      @hectorramirez880 5 лет назад

      Micky ds water cup

    • @danegrossnickle2550
      @danegrossnickle2550 5 лет назад +3

      He's too young to remember those days

  • @laced2645
    @laced2645 5 лет назад +14

    When I seen the rear tires I was like hold on something ain’t right 😂

  • @siyamshafqat8652
    @siyamshafqat8652 5 лет назад +227

    They actually have proper tools but they still do a janky Job🤦‍♀️🤦‍♀️🤦‍♀️🤦‍♀️

    • @sayyidali4658
      @sayyidali4658 5 лет назад +15

      How about the dremel ...all the filings went straight into the turbo

    • @kraz2883
      @kraz2883 5 лет назад +4

      @@sayyidali4658 but all those shavings got kicked out when car was started. Remember the video is putting a turbo on backwards. Means air was being forced out of the compressor.

    • @sayyidali4658
      @sayyidali4658 5 лет назад +1

      @@kraz2883 the filings went straight to the turbine bearings. Not the essence you would want in any job

    • @gillixexik
      @gillixexik 5 лет назад +1

      Sayyid Ali It’s probably a cheap eBay turbo. They do these things for entertainment who is gonna wanna be racing a backwards mounted turbo??

    • @sayyidali4658
      @sayyidali4658 5 лет назад

      @@gillixexik I accept your input. To that effect. .let's put sand in our cheep radiators

  • @AvidSurvivalist
    @AvidSurvivalist 5 лет назад +46

    WD-40, spray that on your tires. Makes a smokier burn out.

    • @brandoncaldwell95
      @brandoncaldwell95 5 лет назад +3

      Bleach is smokier. How a friend cheated ay burnouts on his harley. Kept a bottle in the wheel well that dumps onto the tire. A piece of fishing line was the trigger up on the handle bars near the throttle. Popped into 3rd, dumped the bleach and instant smokeout.

    • @brandoncaldwell95
      @brandoncaldwell95 5 лет назад +3

      @@mrpineapples4752 Dont think it much matters as rubber smoke isnt all that good for you either.

    • @mrpineapples4752
      @mrpineapples4752 5 лет назад

      Brandon Caldwell very good point lol idk something bout inhaling bleach just don’t sound right but learned something new 😂

    • @brandoncaldwell95
      @brandoncaldwell95 5 лет назад +1

      @@mrpineapples4752 Trust me, people use anything and everything to help break a cars tires loose and cause the most amount of smoke as possible. Cheating always happens, so you just join in. Besides, you only live once. Just be a bandit and dont get caught. Also dont be stupid to do things in places you dont know.

    • @mrpineapples4752
      @mrpineapples4752 5 лет назад

      Brandon Caldwell YOU SIR .ARE VERY PERSUASIVE I will join you and be a rebel !! Not a stupid one at that, of course lol

  • @Dracuz123
    @Dracuz123 5 лет назад +192

    i think you shouldve hooked up a boost gauge to see how much psi it actually made...

    • @AdamsWorld84
      @AdamsWorld84 5 лет назад +12

      none.

    • @gavinsilva4272
      @gavinsilva4272 5 лет назад +14

      none because the exaust side of a turbo isnt a compressor it doesnt actually compress air just moves it like one of those "electric superchargers" you find on ebay

    • @DiscoFang
      @DiscoFang 5 лет назад +12

      @@gavinsilva4272 Incorrect. The 2 opposite sides of the core of a turbo are essentially the same. They need to be to create the pressure from the exhaust side in the first place.

    • @jeremyhanna3852
      @jeremyhanna3852 5 лет назад +5

      Really it has to b a compressor of equal value or the shaft wouldn't turn

    • @hydrocarbon82
      @hydrocarbon82 5 лет назад +7

      @@DiscoFang The only real problem to making boost is that comp wheel is convoluted (entry fins bent backwards vs straight out) and the "compressor" has a fairly large trim number (76 if stage-3). It's now like a T04 "N" turbine wheel and a H-trim T04B comp wheel (or 57trim T04E massively clipped). We'll ignore all the thrust bearing & heat cone BS...

  • @generalwrex
    @generalwrex 5 лет назад +119

    I don't understand why Lowes hasn't sponsored you yet.

    • @goodmfvibes8821
      @goodmfvibes8821 5 лет назад +6

      We don't need idiotic Adults as a sponsor.

  • @seven1six
    @seven1six 5 лет назад +16

    #lifeod you should have routed the exhaust INTO the induction side of the impeller. I.E. where the intake normally goes, that's where the exhaust should have went to spool properly. Then exhaust would have gone out where the compressed air usually goes into the Intercooler....
    You would have had MUCH MORE success

  • @jonathansalgado9194
    @jonathansalgado9194 5 лет назад +33

    You went through all this trouble to not even install a boost gauge to verify boost?

  • @eliotmerrill4289
    @eliotmerrill4289 5 лет назад +53

    You let the metal shavings from the Dremel fall right into the compressor..

    • @kraz2883
      @kraz2883 5 лет назад +4

      Thats correct. In this video, the compressor becomes the hot side so shavings got kicked out when car was started.

    • @gillixexik
      @gillixexik 5 лет назад +16

      Eliot Merrill they installed the turbo back wards and mounted it ridiculously do you really think they care about some metal shavings??

    • @poboypowder7567
      @poboypowder7567 5 лет назад

      Eliot Merrill at 5:50 you can see them coming out

  • @Sooeww
    @Sooeww 5 лет назад +128

    What happens when a mother smokes cigarettes while pregnant?
    The baby turns out like Orion.

    • @Vanabond
      @Vanabond 5 лет назад

      Nasty I want to watch the video and see what happens. But I don’t wanna watch cause of this penis

  • @gooddogtalks
    @gooddogtalks 5 лет назад +54

    LIFE Obselete Dude

  • @MannyMJG
    @MannyMJG 5 лет назад +76

    Idk why all these RUclipsrs have in video sponsorships. I always fast forward through them 😂

    • @James-ns6jm
      @James-ns6jm 5 лет назад +5

      Not to promote a sale but for brand recognition. If they are a popular youtuber and you see a brand, your more likely to remember that brand and when shopping for car parts see that brand you are more likley to buy that brand than what you was when you never heard about it. It's simple promotion and it works. All you have to do is sponsor people who have a decent following and they tend to do the work for you.
      TBF when i first got into cars i never knew about K&N but saw it in a youtube video and then i wanted to get a K&N filter.

    • @miatafan
      @miatafan 5 лет назад +2

      I prefer them because I can just skip through them.

    • @redactedrider7606
      @redactedrider7606 5 лет назад +8

      Almost as if they get paid to do them...

    • @ArnoldsKnoks
      @ArnoldsKnoks 5 лет назад

      @@redactedrider7606 :D

    • @melk322
      @melk322 5 лет назад

      They get paid a lot of money to do it, it's what a lot of RUclips's had to resort to

  • @djalkyd
    @djalkyd 3 года назад +1

    Dude, you guys had me rolling. I haven’t laughed this hard in a while.
    Looks like you all had some fun doing science hahaha.
    Keep it up guys.

  • @danielmelendez1192
    @danielmelendez1192 5 лет назад +11

    I LOVE the cop/ambulance sirens at the end of that burnout 😂

  • @ultimategachakidfire9817
    @ultimategachakidfire9817 5 лет назад +2

    Why so much hate on this guy? For real yall. First time watching.

    • @Camlikesbmxbiks420
      @Camlikesbmxbiks420 5 лет назад

      he has just done a bunch of scummy things to his friemds in the past.

  • @iamcool3335
    @iamcool3335 5 лет назад +10

    next video: replacing struts and springs with solid metal bars

  • @mrgrandprix13
    @mrgrandprix13 5 лет назад +1

    Fix you sign guys it’s 2019 people might think it’s a old video

  • @GingerNingerGames
    @GingerNingerGames 5 лет назад +3

    4:20 Filling your turbo with metal shavings to be pushed through it when the car starts. GG

  • @steelogrimm7140
    @steelogrimm7140 5 лет назад

    Seen Your guys channel pop up a few times but never clicked on it until today. Got to say your channel is pretty dope af and another badass reason is your only like 3-4 hours from me. I stay in the Yakima valley. Wish I could hang with you guys be fun.

  • @willienakiz
    @willienakiz 5 лет назад +12

    "Hold on let me get the couplers" -Grabs tape 💀💀💀💀💀😂

  • @damianmonte
    @damianmonte 5 лет назад +12

    Yoooo 😂😂😂😂😂 I’m hype you did this 😂🔥

  • @ethanlindsey
    @ethanlindsey 5 лет назад +17

    If you still have all of the turbos from the mazda protege you should hook all 4 in series making a quad compound turbo setup for this thing. See how it performs.

    • @lanceuppercut6168
      @lanceuppercut6168 5 лет назад

      And how fast they can grenade the engine xD

    • @kapys1722
      @kapys1722 5 лет назад

      And all that boost combined with stock injectors😂

    • @boostedlawnmower9955
      @boostedlawnmower9955 5 лет назад

      Yesss

    • @kittty2005
      @kittty2005 5 лет назад

      And nitrous...Oh hell just plumb an oxygen tank in.Yesss.

  • @pgmurray76
    @pgmurray76 5 лет назад

    Haven't watched this fully yet, but I love K-Sport Tuning and definitely Enkei. GREAT sponsors dudes! My CRX loved its coilovers and Enkei RPF-1's (before getting run over by a HD 2500 Chevy POS pickup while I was parked and inside with the high beams on and horn smashed)

  • @nitrotheoable
    @nitrotheoable 5 лет назад +39

    You guys should try to put oil on brakes

    • @traceanthony3588
      @traceanthony3588 5 лет назад +6

      Uh natural selection

    • @phoenixxineohp
      @phoenixxineohp 5 лет назад +4

      Better yet, Cut them and go for a drive down hill.

    • @brysonshires9742
      @brysonshires9742 5 лет назад

      Go watch Adam lz and see what happens

    • @SeanA88
      @SeanA88 5 лет назад

      Spray paint your calipers with the brake pads still in them

  • @swervolane7477
    @swervolane7477 5 лет назад +3

    Damn i really miss old school haggard garage. That was one of the best car channels back in the day.

  • @vn.ninefive
    @vn.ninefive 5 лет назад +48

    No Flex Tape? I must've came to the wrong channel.

  • @draw5836
    @draw5836 5 лет назад

    That one guy that actually accidentally installed a turbo backward

  • @MaxSpeedMike
    @MaxSpeedMike 5 лет назад +19

    0:03 when you get your first vape

  • @yutub561
    @yutub561 5 лет назад +2

    Flow does not necessarily mean boost. You should hook up a boost gauge and see how much. Glad you commented on saying you weren't sure if it was boost and of it was,it probably wasn't much. Pretty accurate but I'd like to see how much it can boost!

  • @parallel299
    @parallel299 5 лет назад +6

    Dam if onion was getting sponsors like he has now back In the haggard days he could of paid Ruddy and everyone else

    • @eab576
      @eab576 5 лет назад

      He would probably still say he has no money and keep it all himself

  • @mikeraphone7868
    @mikeraphone7868 5 лет назад +2

    I think it would have worked a lot better if the turbo was installed with the direction of flow reversed. So exhaust would enter the turbo where it would usually intake, instead of where the intake air left the turbo. The same would go for the exhaust, so the intake air would come out where the exhaust usually would. Unless you just meant to plumb it completely backwards.

  • @gearjammeroutlawcarhauler2344
    @gearjammeroutlawcarhauler2344 5 лет назад +85

    Dam this dude has fell way the hell off.. he will be hooked on drugs and selling everything he owns.... to be continued

    • @dillon3129
      @dillon3129 5 лет назад +8

      He doesn’t need RUclips for money, he hasn’t needed RUclips money for almost 2 years now

    • @justauser
      @justauser 5 лет назад +4

      Yeah if you think he dosnt have other investments you would be wrong. He knows what he is doing.

    • @turboboy0
      @turboboy0 5 лет назад

      don't you mean "TO BE DISCONTINUED"?

    • @thenewnormal8853
      @thenewnormal8853 5 лет назад

      Do you see the views though? Quite a few videos have over a million views

    • @ChronicKush
      @ChronicKush 5 лет назад +4

      tru tru.. i mean this has been up for sale for a long minute now seattle.craigslist.org/see/cto/d/marysville-pro-am-ready-s14/6848233444.html

  • @dizzywright4379
    @dizzywright4379 5 лет назад +1

    Put a boost gauge on it

  • @mrdrhosmos
    @mrdrhosmos 5 лет назад +29

    I have an EK civic yall can have for 500 bucks in Tacoma 😂 I have zero use for it

    • @TROY_MK6
      @TROY_MK6 5 лет назад +1

      Stock?

    • @pdusty7707
      @pdusty7707 5 лет назад

      I'll buy it lol I live in tacoma

    • @mrdrhosmos
      @mrdrhosmos 5 лет назад +1

      Ay lit hmu

    • @pdusty7707
      @pdusty7707 5 лет назад

      @@mrdrhosmos how do I hit you up off RUclips? Is there a message button or something? Lol

    • @pdusty7707
      @pdusty7707 5 лет назад

      @@mrdrhosmos my email is dustinmelvin25@gmail.com email me some pics if you can

  • @Lewislpalm
    @Lewislpalm 5 лет назад +1

    I think it's hilarious that you did this but you should know it won't produce much if any boost from the basic function of a turbine/compressor.
    The turbine is designed to extract energy from hot/fast air by using a Venturi effect which causes a drop in exhaust gas pressure/temp after it blows through the turbine veins, powering the turbine.
    With that process reversed you'd probably get a tiny bit of compressed air but not much at all.
    Still an enjoyable video, though! You guys always deliver and entertain with wild ideas I've never seen before.

  • @destineal
    @destineal 5 лет назад +3

    Why are you using your powers for evil?

  • @chasevans7171
    @chasevans7171 5 лет назад +1

    Nobody had a boost gauge handy then?

  • @MatchboxGarage
    @MatchboxGarage 5 лет назад +3

    I'm glad you do it so that we don't have to

  • @BGCoop79
    @BGCoop79 5 лет назад +2

    “It made the appropriate noises”
    This is how we know stuff works!
    🤣🤣🤣🤣🤣

  • @mothertrucker
    @mothertrucker 5 лет назад +29

    your sponsors are wasting their money on you now. sort your stuff out.

    • @ash1ey100
      @ash1ey100 5 лет назад +5

      Please go back to decent content.

    • @zo1dberg
      @zo1dberg 5 лет назад +2

      They should start by cleaning their rooms.

  • @roll-in-peace231
    @roll-in-peace231 5 лет назад

    I love how fuckin crazy you are and i pays off lol like the 50 wheel spacers . U guys are killin it .. great work

  • @chrisnevarez7526
    @chrisnevarez7526 5 лет назад +3

    Throw it on a dyno or do a street pull, you can’t even tell if it made a difference from a burnout.

  • @ghelldorfer8068
    @ghelldorfer8068 5 лет назад +1

    Onion Danobitch.

  • @carycoller3140
    @carycoller3140 5 лет назад +16

    That's 11 minutes of my life I can't get back.

    • @gabrielvieira6529
      @gabrielvieira6529 5 лет назад

      In my case 7 minuts

    • @darkpassenger7064
      @darkpassenger7064 5 лет назад +2

      Watched maybe 3. That was way too much. I understand they are trying to generate views but these guys are fucking morons.

  • @dinnercat1142
    @dinnercat1142 5 лет назад +1

    10:40 They cut it because he put his finger on the turbo and probably burnt the shit out of it.

  • @leviathan7865
    @leviathan7865 5 лет назад +5

    Was trying to be cool doing a burnout ends up doing a one wheel peel flexing 😂

  • @wickedmartyn
    @wickedmartyn 5 лет назад

    Don't ever change.. this is now a public service you're providing.. this is the shit us guys REALLY need to know!
    Love the videos!

  • @mrmidnight32
    @mrmidnight32 5 лет назад +3

    Haggard is one of those channels that becomes awesome for a while. Shit happens and they crash and burn like jackass. 😢

  • @Montblanc1986
    @Montblanc1986 5 лет назад +1

    These guys can do anything except the right way

  • @chrisgould428
    @chrisgould428 5 лет назад +6

    Next video: *Installing the transmission backwards...*

    • @nbain66
      @nbain66 5 лет назад

      5 reverse gears and one forward

    • @apollo1230
      @apollo1230 5 лет назад

      RWD Civic lmao

  • @dannykwak4560
    @dannykwak4560 5 лет назад +1

    The comments on here are... priceless.

  • @elonmust7470
    @elonmust7470 5 лет назад +8

    Welding on the car with the battery hooked up isn't smart.

  • @Xostriyad
    @Xostriyad 5 лет назад

    One of the best channels on RUclips, please keep making this shit!

  • @alexyoungberg5232
    @alexyoungberg5232 5 лет назад +8

    *Man that hoodie is the 90's epitomized..*

    • @adonaiyahteemann4030
      @adonaiyahteemann4030 5 лет назад +2

      They made a splash edition Ford ranger with that on the sides. It was the coolest stock ranger I've ever seen.

    • @ModMotorMayhem
      @ModMotorMayhem 5 лет назад +1

      i'm holding an ice cream cup that my flurry came in from the local ice cream parlor, exact same pattern to the T

    • @gregatron4528
      @gregatron4528 5 лет назад +1

      @@adonaiyahteemann4030 I remember that splash on the tv show Baywatch .. BUT I think that design on his hoodie is off of them Solo paper cups.. Maybe.. I could be wrong.

    • @marccrey8791
      @marccrey8791 5 лет назад +1

      shut the fuck up, it's just a paper cup design you fucking dumbass. don't disrespect the 90's like that.

  • @craigstevenson4306
    @craigstevenson4306 5 лет назад

    I am so glad I found this channel

  • @ashleykmiec1207
    @ashleykmiec1207 5 лет назад +5

    Phrases like "we're making air!" and "look the turbo is burnt" really make me question your technical skills.

    • @AbeNXC
      @AbeNXC 5 лет назад

      So you watch one of his "see if this works" videos to judge Orion and his teams general technical knowledge?... This guy can swap an engine in an hour if he needed to, whats your technical knowledge??

    • @ashleykmiec1207
      @ashleykmiec1207 5 лет назад +1

      @@AbeNXC engine swaps, gearbox swaps, turbo conversions, engine overhauls, general fabrication work.
      What's yours?

    • @ableusermcz
      @ableusermcz 5 лет назад +2

      Ash Kmiec weird flex but ok

    • @AbeNXC
      @AbeNXC 5 лет назад

      You do know his old channel was called HAGGARD garage right?... As in they do what they want how they want and talk about it in whatever terms they want

    • @ashleykmiec1207
      @ashleykmiec1207 5 лет назад

      @@AbeNXC welcome back.
      I do what i want too. Hence the comment.

  • @Egonzales85
    @Egonzales85 5 лет назад +1

    I love the sawzall is used in almost every video! 😂 it’s the catalyst for all next level JDM mods! 🤣

  • @repentfulsinner
    @repentfulsinner 5 лет назад +8

    What reading are you getting from the O2 sensor?

  • @philipr1446
    @philipr1446 5 лет назад +2

    You guys went to Lowe’s and a Home Depot ad pops up immediately lol

  • @flyhigh5868
    @flyhigh5868 5 лет назад +3

    For the next "twinturbo on backwards"😱😱

  • @me7229
    @me7229 5 лет назад

    These guys do some of the funniest stuff I’ve ever seen. Awesome channel

  • @tv340i
    @tv340i 5 лет назад +4

    Now take it to a car meet and act like you don’t know it’s backwards (like so they see)

  • @busabro9983
    @busabro9983 5 лет назад +2

    Orion looks like he smells

  • @captaintraction4024
    @captaintraction4024 5 лет назад +10

    Did anybody else shriek when he dremled inside the turbo? All of the metal fragments falling in it was seriously hurting me!

  • @nathenleffert_official
    @nathenleffert_official 5 лет назад +1

    I have something you guys can try if you're smart enough try running the engine backwards by switching the gas and intake or intake and exhaust manifolds I don't know how it would go but try it see if you can get the engine to run backwards

  • @arodg025
    @arodg025 5 лет назад +5

    If only there was some sort of gauge you can hook up to see if it was producing boost or not.

    • @traceanthony3588
      @traceanthony3588 5 лет назад

      You mean a.... boost gauge.....

    • @ozziemitch1
      @ozziemitch1 5 лет назад

      @@traceanthony3588 whoosh

    • @Mr-cl2bh
      @Mr-cl2bh 5 лет назад

      @@traceanthony3588 really?

    • @pr3o5
      @pr3o5 5 лет назад

      @@traceanthony3588 lmao moron

  • @justinjensen2014
    @justinjensen2014 5 лет назад

    “It made the right noises”..... fucking loving the scientific knowledge here Orion lol

  • @JohnStax98
    @JohnStax98 5 лет назад +19

    If its installed backwards, does vacuum act as boost?

    • @TheMojo487
      @TheMojo487 5 лет назад

      No, because at wide open throttle there is no vacuum...

    • @TheMojo487
      @TheMojo487 5 лет назад +1

      And also because there is still exhaust pressure, spinning it the other way :)

    • @ethanlindsey
      @ethanlindsey 5 лет назад

      @@TheMojo487 ok, what if they hooked a roots style super charger up to the exhaust so that it pulls the exhaust out instead of pushing boost into the intake?

    • @gionder
      @gionder 5 лет назад

      @@ethanlindsey now that'd be interesting. If the camshaft has some aggresive overlap, it would actually pull some additional mixture into the combustion chamber. Also, it would smoke like a MF

    • @traceanthony3588
      @traceanthony3588 5 лет назад

      No, two different things

  • @tristanmuchwano
    @tristanmuchwano 5 лет назад +2

    These guys know ALOT about cars I wish I had there experience and knowledge

    • @trillkendo4528
      @trillkendo4528 5 лет назад +1

      Tristan Muchwano is knowing not knowledge ?

    • @tristanmuchwano
      @tristanmuchwano 5 лет назад

      Kendo Da great your right. But I wish I could come up with stuff like they do

  • @richardjordan9092
    @richardjordan9092 5 лет назад +3

    Anyone remember when chow had a car? Me either.

  • @olivia18019
    @olivia18019 5 лет назад

    Digging the soft drink hoodie at the beginning 😂😂

  • @MRTuning704
    @MRTuning704 5 лет назад +6

    I didn’t know scumbag labs had an eBay version

    • @zackow2
      @zackow2 5 лет назад

      these guys are the og scumbag labs

    • @erickskaer9358
      @erickskaer9358 5 лет назад +1

      Idk man I think od is the og of these “let’s see if it works” type videos. scum bag labs is new, Onion has been doing stupid shit on RUclips for a good while now

    • @MRTuning704
      @MRTuning704 5 лет назад

      You boys talk to me like I haven’t watch these guys before
      This is definitely the first time O’Neal has set up a desk and sat in front of the camera explaining the shenanigan he’s about to do xD

  • @ThatHoodlum19
    @ThatHoodlum19 5 лет назад +1

    Well that was entertaining af, hahaha had me giggling throughout. Good shit fellas

  • @reeseongo8487
    @reeseongo8487 5 лет назад +5

    The Will cup jacket

  • @Turbo_Tractors
    @Turbo_Tractors 5 лет назад

    Love it. Old Haggard vibes for sure

  • @ChevyCitation
    @ChevyCitation 5 лет назад +11

    At 0:14 What is with the "Dixie Cup" Sweater

    • @eddymac2052
      @eddymac2052 5 лет назад +1

      Lol. I knew i couldn't of been the only one. I hate them damn cups. No offense to the sweater tho

  • @dankennedy8757
    @dankennedy8757 5 лет назад +1

    Depends on the impeller/turbine ratio. It would make it weaker with a vacuum instead of boost

  • @youtubecomments5951
    @youtubecomments5951 5 лет назад +3

    Wait you dremeled the inside and let all the shaving go into the turbo blades err

    • @JCMayPE
      @JCMayPE 5 лет назад

      It's okay. The turbo isn't getting any oil, so it's not going to last long anyway.

  • @TheKoppenhaffer
    @TheKoppenhaffer 5 лет назад +1

    Remember that time you tried to get Rudnick to kill himself? Peppridge Farm remembers.

  • @dayplays7777
    @dayplays7777 5 лет назад +3

    What happens when you put a clutch in backwards

  • @C-M-E
    @C-M-E 5 лет назад +2

    Take a close look everyone: This is the future of America.
    Grade A product of the American Education System.

    • @cpufreak101
      @cpufreak101 5 лет назад +1

      Idiocracy is coming real. Celebrity president, decreasing quality content, just waiting for the most popular show to be on the violence channel.

  • @jakeblack2119
    @jakeblack2119 5 лет назад +3

    Do A Wooden driveshaft please

  • @Smithtobewith
    @Smithtobewith 5 лет назад +1

    Boy haggard garage has really gone downhill

  • @Calebgmctruck
    @Calebgmctruck 5 лет назад +3

    Make a car run on elmers glue

  • @TheZacdes
    @TheZacdes 5 лет назад

    Great work with the dremel letting all the aluminium bits fall down into the turbo,lol

  • @jackwynn5819
    @jackwynn5819 5 лет назад +3

    Not a huge honda fan but I give you permission to scrap it

    • @kevinb204
      @kevinb204 5 лет назад +1

      I guess you have been beaten by a few Hondas😂

  • @bennyjetsaroundtheworld9047
    @bennyjetsaroundtheworld9047 3 года назад

    I got welders burn helping my grandpa in the shop once now I instinctively close my eyes everytime I hear a welder lol

  • @Theaudioman99
    @Theaudioman99 5 лет назад +4

    At 3:55 you can see the perfect Bosozoku style backwards turbo 😂😂😂 kinda

  • @BigDaddyDanny
    @BigDaddyDanny 4 года назад

    Can we just appreciate the camber on those back tires 😳😂

  • @AcidicGamers2
    @AcidicGamers2 5 лет назад +3

    Should have just cut the flange off, flipped the manifold and welded it back on..🤷🏼‍♂️

    • @cpufreak101
      @cpufreak101 5 лет назад

      It looks like it used a triangular bolt pattern. It wouldn't have fit

    • @masterbaiter2206
      @masterbaiter2206 5 лет назад +1

      @@cpufreak101 he never mentioned just flipping it.. "CUT" the flange off and re-weld upside down.....

    • @cpufreak101
      @cpufreak101 5 лет назад +1

      @@masterbaiter2206 well my derp. don't comment while tired kids

  • @kheomarshall9750
    @kheomarshall9750 5 лет назад +1

    Where is the proof that it made boost???

  • @willmatic84
    @willmatic84 5 лет назад +4

    🤔 next video 8 turbos on civic 😙👍🏼

    • @willmatic84
      @willmatic84 5 лет назад

      @Ismauveacolor? Johnson I know but I want 8 lol