Butt Joint - Joint of the Week
HTML-код
- Опубликовано: 30 мар 2019
- Get the Katz-Moses Magnetic Dovetail Jig here: lddy.no/stiz
This week’s woodworking joint of the week is the BUTT Joint. This is by far the most requested Joint of the Week in Joint of the week history. Let me know in the comments what joint you’d like to see next week. Thanks for watching! Please like, comment and subscribe. Cheers!
#jointoftheweek
#aprilfools
----
Buy the Katz-Moses Dovetail Jig: lddy.no/stiz
I have Walnut Slabs for sale: lddy.no/stj0
Buy The Katz-Moses Stop Block: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Best of Katz-Moses Woodworking Video Playlist: • Making a Modern Bar St...
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
New Flush Trim Saw: lddy.no/stix
Dovetail Saw: amzn.to/2xi5EUV
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
¼” Inexpensive Router Bit Set: amzn.to/2JUPrJB
½” Inexpensive router Bit Set: amzn.to/2Abyhrq
Whiteside ¼” shank Spiral Upcut Bit ⅛”: amzn.to/2LDw6S1
Whiteside ¼” Shank Spiral Upcut Bit 1/4”: amzn.to/2uNanxA
SUPER MEGA FLUSH TRIM BIT ½” Shank: amzn.to/2LyH1wr
SUPER MEGA FLUSH TRIM BIT 1/4” Shank: amzn.to/2JWMFDx
45 Degree Bit I Like: amzn.to/2JRNNII
Whiteside Inlay Kit I like: amzn.to/2JV0DWp
Flush Trim Bit I Use All The Time for smaller applications: amzn.to/2uPrvCC
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Bescutter Laser (awesome c02 and fiber lasers) Website: bit.ly/bescutter
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Tags:
woodworking,finger joint,corner joint,wood joints,how to make a butt joint,box joint,butt joint,woodwork joints,sliding dovetail joint,wood joint,pocket joint,margin joint,dovetail joint,how to make a miter joint,how to make a pocket joint,pocket hole joint,woodworking episode,woodworking episodes,mitre joint,miter joint,how to make wood joint,common wood joints,mitered joint,hand woodworking projects Axiom CNC (so awesome!): bit.ly/2J9RnPX - Хобби
ARE YOU KNUCKLEHEADS HAPPY NOW?!?
HAHAHAHAHAHAHAAHAha ha
ROFL. Thought you lost your mind for a bit... Well played sir.
LOL, That s funny!!
If you waited until tomorrow, it would have been much funnier
Never mind
Everyone knows how strong an end grain glue up is! That’s how I make my stock longer too.
Bahahaha good advice
“The strongest joint in woodworking” 😂🤣😂
totally is ;-)
Oh right, tomorrow.
@@1pcfred, "nails and screws"
I really needed a laugh and this was it.
This ones always perplexed me. Thanks for once again demystify fine woodwork.
Gotta give the people what they want !
I wasn't able to watch until the end but I'm glad to know about this technique. I will be doing all of my joints this way from now on.
Bahahahaha my favorite
the madman finally did it
Video of the year. Your the best.
I said what? How can that be. You got me. LOL
The production quality of the Fragrance sprayers across the candles at the end, well played!
For all the folks ribbing JKM about releasing this a day early, just know that he just wanted to be the first to post an April Fools Day video in Australia. ;)
That's the best one yet!
I knew you were being funny and kept waiting for the punchline... wasn’t even thinking about April Fools... got me with the sign... nice 🤣❤️👍
So you’ve been setting us up for this ever since you started the JOTW series! “I will NEVER do a butt joint video!” 🙄🤣 Knucklehead!
Hahaha a 6 month punchline in the making
Man, that is one sweet joint. Way beyond my level but I hope to get there one day. Watching a master craftsman put something like that together inspires me to keep working on my skills. Great vid.
Lmao
Best joint of the week video EVER
Having FUN!!!
Best video so far…
You sir just made my day. I am now going to get my "strongest joint " off the couch and go build a table.
Go get'em sir!
Dont forget to use but joints.
The finest moment you had there when you placed clamp on the wrong board. Fantastic
Brilliant!! I've always wondered how they're done!
this had me rollin. I love it.
Bravo good sir 👏🏼👏🏼👏🏼
Absolutely loving your channel btw, keep up the great work man!
oh well okay . i am new to wood working sooo lol . thank you Katz
How you filmed that with a straight face is beyond me. You win the woodworking internet today sir.
#huskyboywoodworking
Wow your knowledge of advanced joinery techniques never fails to impress
Brilliant joint, finally...
:)
Keep it rocking!
You had me that makes me the knucklehead. 
Well played sir.
BRILLIANT!!!!! Cheers, Huw
Dude. You got me. I was thinking you lost your mind.
Subscribed!
Mitre joint with hot glue! And nails!
Loves all 2 hours and 21 minutes of this video! 🤪
Not going to lie, they had us in the first half
As soon as I started to watch this I scrolled down to the date it was uploaded. From that point I just waited for John to say "April Fools". I was not dissapointed.
legitimately appreciated how to make a butt joint, then learned I was being trolled. 🤦♂️
Hahaha, sammmeee!!!
me too. thought I was going to have an easy time making my guitar speaker cabinet
Nooooo waaaaaayyyyy. You really did it.....lol. Ha ha ha.
FINALLY!
+1million points for rocking it with style
I, legitimately, thought I had missed some foundational aspect of woodworking here 😂 ya got me.
HA! You got me. You had me rethinking my entire woodworking methodology for a second there; “wait, END GRAIN is the strongest...?!?” Well done Sir.
this is amazing!!
That was awesome!
ROTFL! I am new at this but it didn't take me long to realize you were totally nutz! The ending says it all. Thanks for the laugh!
This was great man! Im sitting here thinking to myself at the halfway point, he's seriously doing this video! LOLOL. You definitely got me! Also I love the new shop and all your doing! Wish i lived closer, i have some BEAUTIFUL Antique and Vintage machinery that would look Mint in your shop. Classssy! Have a good one Jonathan!
That was one smokin joint. Finally, a joint that even I can do.
Way too funny thanks I needed a laugh 😂
Ha Ha....good one! You had me, but I was scratching my head. -Ed
Beautiful
Good one! That's IT I'm selling all my woodworking tools and taking up. Painting by numbers. AF!
haha that was brilliant.
You handled that like a champ!!!
Made my morning lol
bro, I'm a beginner woodworker and as I watched the video I was like "gosh, everything I learned so far could be wrong?"... 😬 and then, bam! April's fool! well, nice sneaky surprise test for me! I think my foundations are getting solid LOL thanks for the lesson and the laughters!
What a sophiscated one! I'll try later. Thank you
Finally, a joint I can do!
Finally! The people have been heard!
Well played!
This video had me cracking up for a while. At first I was like “it’s the strongest joint?!?!”. Very good.
If only it were actually April fools day.
Ya had me at " one of the strongest joints in woodworking" lol good stuff Jonathan 🥴🍻
You had me you turkey! Strongest joint in woodworking. HA.
HA! For a second there you had me question everything I know for sure about woodworking.
beautiful....
The seriousness of the video kept cracking me up!! I was waiting for the end when you showed us just how strong the joint is though. I mean you should be able to drive a car over that joint!!
Finally! Now I can make a really nice and fancy jewelry box with the prettiest joint ever devised! It's sure to be a show-stopper. Thanks Jonathan, it's about time!
I think using nails that have a shiny ¼" head on it will really make it pop.
PS: How many times did you have to start recording over because you couldn't keep a straight face?
Favorite moment.... "...this is where the magic happens..."
Your so gangsta at the end... haha
I thought I detected just the slightest hint of sarcasm.
Hahaha hilarious!!
Yaaaaaaaassss!!!!
Hahaha that was awesome 😂
Thanks bud!
I'm going to assume part of the joke is that you're a day early....... :-) I have a new name for that also - Invisible Dovetails.
Hahaha that's next years April fools joke
nanodovetails can be catchy nowadays
Good one, Jonathan! At least, now this (strongest joint in woodworking) can be put to bed! :D
I thought you lost your mind for a minute there, Jonathan. LOL
Billy
That joint was the butt of the joke! 😉👍🏻👊🏻
quick question. how would you clamp this if you were using wood longer than your clamp can handle?
Dude, thought you had lost it...great job buddy!!!
Very cool haha 😂
Haha you got me . I that joint was only use on the board strecher
I was waiting for a surprise joint at the end there for a while...
New to woodworking and your channel. The whole time I was thinking, "wait, this guy is just gluing to boards together?". Lol
What a Butthead
CooL!
I'm dying laughing LOL.
Lol your awesome
I was watching this video with squinted eyes the whole time like... "😑what am I missing?!?!" You're a trip man!
Hahahaha
Oh man, I was about to say. Wtf really but makes sense.... ya got me.
There's no way I can pull that off. I'm not ready...
Butt joints crack me up...
I think you should have clamped it the first way you had it Bwahaha... Well you're no William Walker that's for sure Haha. Great video Dude!
I almost thought this was serious until about 0:52. 🤣🤣🤣
Jonathon, I caught a video where he did a double blind mitered dovetail, but without much detail on how to. Have you done this before?
You used way too much wood on that joint. 😎
Way too much grain!
should have saved this for tomorrow 😂
Your a day early!!!!!
Joint of the week, Butt Joint....now we're talking more my speed! Hilarious video by the way, man!
King of the hill brought me here
If ocasio-cortez was a carpenter
Called it 😂
He almost clamped the wrong direction 😂😂😂😂😂
Missed opportunity
I'm no woodworker but I just watched this and I was like I may know nothing but there is no way that's the strongest butt joint...then it got to the end.
LMAO. I like it.
hahahaha
April Fools Jon!!