I got the glasstr ez fit protector for my iPhone 13 pro max and i have my unboxing for this as well on my channel. Best screen protector in the market!!!!!! great job Spigen!
Very happy with this product, application was as advertised for my Max although wish it had a little more edge to edge coverage. Just bought it for another IPhone 11 and edge to edge coverage is worse.
Yes they do err on the side of caution, possibly to do away with any chances for interference with a case. But the whole experience of using and installing them is great. 👍
They both offer the same functionality, earlier the Align master used to come without oleophobic coating but now that’s not the case. You can choose either one of them and you will find that Spigen is promoting the EZ fit for the new iPhones more.
@@TechnologyRig Thanks for the clarification, Then i hope both offers the same protection and functionality and it feels the same when using them?ez fit it out of stock in my place,only normal align master is available,as u mentioned i also observed oleophobic is there in both of screen protectors.
Hey Ashish, does the coverage of the screen protector cover the entirety of the screen (minus notch of course). There seems to be a sliver around the screen that the Spigen protector doesn’t cover like some other protectors
Says its fool proof then decides to start pressing around the edges before first sliding your finger across the middle. So it's not completely fool proof? Luckily you managed to get the visible bubbles out. Might run out of luck next time.
Michael there’s been some misunderstanding, foolproof in terms of position on screen. Since it uses an adhesive to stick to the screen, you will naturally need to push down on it to ensure a good fit. If you do get bubbles, you can always use the squeegee to remove them.
@@TechnologyRig I’d be careful. You’re not always guaranteed to remove the bubbles successfully. By pressing around the outside first your promoting air pockets to form down the middle. If you then take too long to remove them bubbles you may find that the adhesive has stuck too much to remove them. Thanks for your reply 👍
Could you please review the leather case for iPhone 12? Heard so much about it, especially the way they patina. even your reply here would be helpful. So worth it? Thanks!
I have a couple of MagSafe reviews coming up Swaroop, apart from the price, there’s nothing wrong with it.. really nice genuine leather feel and light weight.. if you don’t mind spending 6k on a cover, go for it..
You will get an extra screen guard inside the box itself and yes you should be able to reuse the mould if you can align the screen protector inside it properly before installation and use some sort of sticker to attach it to the mould.
This tutorial did not work for me :( The screen protector was not on my phone at the end. at 4:14 it looks like I removed the film and the screen protector, not just the film. hopefully this saves someone else from wasting the $9 protector.
I put one on my new iPhone 13. Was the easiest install I have ever done. And, no bubbles whatsoever. Five thumbs up. 👍👍👍👍👍
What back cover is that?
Clear explanation, helped me put on mine
Is it compatible with the Rhinoshield solid suit case?
I got the glasstr ez fit protector for my iPhone 13 pro max and i have my unboxing for this as well on my channel. Best screen protector in the market!!!!!! great job Spigen!
Is it matte & anti-finger print?
Very happy with this product, application was as advertised for my Max although wish it had a little more edge to edge coverage. Just bought it for another IPhone 11 and edge to edge coverage is worse.
Yes they do err on the side of caution, possibly to do away with any chances for interference with a case. But the whole experience of using and installing them is great. 👍
@@TechnologyRig how
@@TechnologyRig true, its for the international case coverage. Screen protector covers any case
whats the screen protector size fro iphone 12 ?
does it leave dust on the edges ?
Is there any link for back cover seen in the video for iPhone 12
Official MagSafe case? geni.us/iphone12magsafecase
i love them i always get them
i always tell people get them
Is there any difference between this and align master tempered glass of spigen?
They both offer the same functionality, earlier the Align master used to come without oleophobic coating but now that’s not the case. You can choose either one of them and you will find that Spigen is promoting the EZ fit for the new iPhones more.
@@TechnologyRig
Thanks for the clarification,
Then i hope both offers the same protection and functionality and it feels the same when using them?ez fit it out of stock in my place,only normal align master is available,as u mentioned i also observed oleophobic is there in both of screen protectors.
@@TechnologyRig spigen told me that the alignmaster hd has more clarity than the ez fit, is it noticable?
Thank you for a very clear explanation. Now to give it a go!
Every time I use this it still miss aligns I think it’s my fault lol. It over laps the true depth camera system slightly.
Is the glass smooth to touch ?
Very smooth, it feels like the iPhone screen.
Apple leather case or spigen hybrid clear case?? I know they’re totally different cases but what’s best of money.
I prefer the Apple leather case, it feels really special..
Hey Ashish, does the coverage of the screen protector cover the entirety of the screen (minus notch of course). There seems to be a sliver around the screen that the Spigen protector doesn’t cover like some other protectors
That little area is most likely open so that anyone using a case, the case doesnt lift the screen protector at the edges
nice video, what is the difference between spigen's ez fit and align master?
They only differ slightly in the application mould and method, you can go for either one. They’re promoting EZ fit mainly for the newer iPhones.
@@TechnologyRig Thanks
@@TechnologyRig They said the align master is hd and has more clarity than the ez fit, is it true?
@@gabosus that’s just a market tactics nothing else
Sir suppose Iss product koo manga lai... Aur Phir man Kiya ki isse use nhi kre too Phir Kya mai Issse return kr sakta hu
Mostly tempered glass doesn’t come with return policy. But you can check return policy before ordering
@@fuckfailure255 ooo🤔🤔
Says its fool proof then decides to start pressing around the edges before first sliding your finger across the middle. So it's not completely fool proof? Luckily you managed to get the visible bubbles out. Might run out of luck next time.
Michael there’s been some misunderstanding, foolproof in terms of position on screen. Since it uses an adhesive to stick to the screen, you will naturally need to push down on it to ensure a good fit. If you do get bubbles, you can always use the squeegee to remove them.
@@TechnologyRig I’d be careful. You’re not always guaranteed to remove the bubbles successfully. By pressing around the outside first your promoting air pockets to form down the middle. If you then take too long to remove them bubbles you may find that the adhesive has stuck too much to remove them. Thanks for your reply 👍
Could you please review the leather case for iPhone 12? Heard so much about it, especially the way they patina. even your reply here would be helpful. So worth it? Thanks!
I have a couple of MagSafe reviews coming up Swaroop, apart from the price, there’s nothing wrong with it.. really nice genuine leather feel and light weight.. if you don’t mind spending 6k on a cover, go for it..
@@TechnologyRig Thanks! Gonna order one. Also looking forward for the review
@@Singularityisherenow they do patina over time but that’s the tendency of real leather.hope you got your and i’m going to get mine next week.
Plz give link for i phone xs
Is it a one timer or we can use the mould with a normal screen guard too the next time?
You will get an extra screen guard inside the box itself and yes you should be able to reuse the mould if you can align the screen protector inside it properly before installation and use some sort of sticker to attach it to the mould.
Technology Rig okay, and what is the durability in terms of scratches and time period?
Its very good Shantanu, I’ve been using it on at least 3 phones without any issues or scratches. Go for it! 👍
Thanks anot
This tutorial did not work for me :( The screen protector was not on my phone at the end. at 4:14 it looks like I removed the film and the screen protector, not just the film. hopefully this saves someone else from wasting the $9 protector.
You're moving it too much, it will catch dust.
Is that Iphone 12 tempered of Spigen will be compatible for Iphone 11