Another great tip when applying any form of screen protector is to go into your bathroom, close the door, run the shower really hot for a couple of seconds, just as the mirror starts fogging up turn off the shower. You have now created a clean room with a lot less dust particles in the air...
Some notes for best installation practice. 1.) don’t lift iPhone once the plastic tray is applied (increases likelihood of bubbles)… push down firm on a table and leave it there for 1 minute 2.) remove second film before squeegee application to remove bubbles
I put the screen saver first time and it was perfect, took the advice to install in the Bathroom after opening the hot water for about 3-4 Mins. Perfect conditions and it was actually easy to install. Much appreciated. Thank you.
Thanks for a clear, informative guide that tells you exactly what you need to know - and in half the time that other, comparable presentations take. I have just completed my first ever screen fitting that worked perfectly the first time, and did not include a virtual nervous breakdown! As you said, preparation is all, and the fitting system is as good as Spigen claim. Excellent product, excellent video - thanks.
You should get the full coverage tempered glass from Spigen. It covers the notch and no loss of sensors or the front camera. I have an iPhone 13 pro and works with my casetify and Rhinoshield cases. Cheers from Bogotá, Colombia.
Had a salesperson install my screen protector when I bought my iPhone 13 Pro Max and she left 2 particles underneath which I believe were responsible for the phone randomly opening windows. Thanks for a straightforward tutorial!
I like it cause as you know the Otter Box no longer comes with the screen saver,So the Spigen leaves just enough space for the otter box frame Win, win.
I wish they made these for Samsung phones because I have gotten pretty good at cleaning and applying the screen protector but I always miss the tiny hole punch camera by a tiny bit.
I've just ordered an iPhone 14 Pro Max, going to be adding this Spigen Screen Protector onto the new phone. Pairing it with a Mous Limitless Aramid Fibre Case.
Hi, I have a 14 pro and would like to buy this screen protector. Is it solid though ? I mean will it really protect your phone in case it falls ? I have a zagg screen protector right now but would like to replace it because my phone fell but it’s just the protector which got some scratch
Spigen provides two types of screen protectors, the first one like yours and the second one covering the front camera and sensors. So, what do you think which one is better? Does the one with front camera and sensor covering cause any issue with face id etc?
I saw the other spigen screen protector Alignmaster : the one where it covers the whole screen . Just wondering is it worth getting cuz its kinda hard to find. Does this one with the notch unprotected get scratches or anything ? . And another concern.. is there dust piling up around the notch or no ? Thanks in advance
Hmm good installation kit, but for me you had only just applied the protector and within 3 seconds it was covered in smudges. I wish it had a better coating that repels oils etc
👑 Thank you for the easy to understand, step by step video tutorial on how to put on a Spigen EZ Tempered Glass Screen Protector. I just purchased and received it today from Amazon. Putting it on a iPhone 14 Pro Max. There was a short video to watch how to put it on. Nevertheless it still wasn't to clear for me to understand. Nevertheless watching your video made it absolutely clear. Especially the part about how to press and slide. I was saying to myself slide what? The entire cover with the phone up and down? 🤔 But it meant your finger on the back of the cover 😂
@@TeknoTalks what screen protector u using currently? My tempered glass on iphone 13 gets bubble after every 10-15 days and this is my 4th tempered glass
I bought this case for my iPhone 14 promax I haven’t had a phone since my 6S plus needed to be recharged about 10 times a day so I just bought the 14 promax and put the screensaver on I have multiple sclerosis my hands don’t work good at all and there’s not one drop of dust under the screen I took the new cover off the phone place this on top of itAnd it took about 10 minutes with me taking my time because I can’t walk and my hands don’t work anybody could put this song it’s the best most lined up screen saver out there when you get a new phone don’t take the protective cover off until you buy one of these and you just take the protective cover off and have this ready drop it on first down in the middle wait 30 seconds and you’re done
Spigen really needs to stop using that plastic alignment tool. It's wasteful a one time use tool that then gets thrown away. Like we don't have enough plastic that isn't recycled. They could use a potato starch plastic that easily biodegrades or cardboard.
This is just stupid I have put more than a thousand screen protectors on all sorts of phone bare hands in seconds in the middle of a crowded mall no extra shit needed what is this
Another great tip when applying any form of screen protector is to go into your bathroom, close the door, run the shower really hot for a couple of seconds, just as the mirror starts fogging up turn off the shower. You have now created a clean room with a lot less dust particles in the air...
I saw that in a MrWhose the boss video
Nice, gonna try this out next time lol.
i installed mine in the bathroom
@@elleon1207 me too, I was even taking a shit while doing it
This was such an awesome comment. Cheers mate!
Some notes for best installation practice.
1.) don’t lift iPhone once the plastic tray is applied (increases likelihood of bubbles)… push down firm on a table and leave it there for 1 minute
2.) remove second film before squeegee application to remove bubbles
I put the screen saver first time and it was perfect, took the advice to install in the Bathroom after opening the hot water for about 3-4 Mins. Perfect conditions and it was actually easy to install. Much appreciated. Thank you.
No problem!
Thanks for a clear, informative guide that tells you exactly what you need to know - and in half the time that other, comparable presentations take. I have just completed my first ever screen fitting that worked perfectly the first time, and did not include a virtual nervous breakdown! As you said, preparation is all, and the fitting system is as good as Spigen claim. Excellent product, excellent video - thanks.
Thanks!
M
You should get the full coverage tempered glass from Spigen. It covers the notch and no loss of sensors or the front camera. I have an iPhone 13 pro and works with my casetify and Rhinoshield cases. Cheers from Bogotá, Colombia.
Would you be able to link it for me
Link?
The full coverage only compatible with spigen cases, while this compatible with any cases
@@proxii2404 lol no . its depends . i use more case than spigen case and its does fit with my full cover tempered glass on iphone 13 pro max 😌
@@ekramyt2866 huh, well that’s what the customer service told me, knowing this I would’ve gotten the full one
thank you ordered for my new iPhone 14,
my biggest tip for the dust is I use a lint roller makes it so much easier to do!
The best screen protector of all… I love this brand…
Had a salesperson install my screen protector when I bought my iPhone 13 Pro Max and she left 2 particles underneath which I believe were responsible for the phone randomly opening windows. Thanks for a straightforward tutorial!
No problem
Did it first time, it was perfect.. perfect!
I did it and it was the best. 100% Easy and great looking.
I like it cause as you know the Otter Box no longer comes with the screen saver,So the Spigen leaves just enough space for the otter box frame Win, win.
Can you please give me the iphone 13 pro screen guard link by spigen
a.co/d/eEM4TE3
wasted two Spiegen glass protectors. too much dust and I'm too OCD about it not being perfectly centered
I wish they made these for Samsung phones because I have gotten pretty good at cleaning and applying the screen protector but I always miss the tiny hole punch camera by a tiny bit.
They already did man! I was checking this video for my Galaxy S22+ in which I'll be applying the spigen tempered glass within couple of hours.
I've just ordered an iPhone 14 Pro Max, going to be adding this Spigen Screen Protector onto the new phone. Pairing it with a Mous Limitless Aramid Fibre Case.
Hi, I have a 14 pro and would like to buy this screen protector. Is it solid though ? I mean will it really protect your phone in case it falls ? I have a zagg screen protector right now but would like to replace it because my phone fell but it’s just the protector which got some scratch
Thank you 🙏 for your help. Very good explaining step by step.
Spigen provides two types of screen protectors, the first one like yours and the second one covering the front camera and sensors. So, what do you think which one is better? Does the one with front camera and sensor covering cause any issue with face id etc?
I prefer the one that covers the camera and sensors as it stays flush, and it hasn’t caused me any problems at all
I saw the other spigen screen protector Alignmaster : the one where it covers the whole screen . Just wondering is it worth getting cuz its kinda hard to find. Does this one with the notch unprotected get scratches or anything ? . And another concern.. is there dust piling up around the notch or no ? Thanks in advance
Haven't gotten any scratches on the notch so far and dust wise it's very minimal.
Great tutorial! I used your video to install the screen protector. It worked great! Perfect installation!
Glad it helped
I will definitely buy it or similar as I can’t put on screen protectors
Hmm good installation kit, but for me you had only just applied the protector and within 3 seconds it was covered in smudges. I wish it had a better coating that repels oils etc
Nice video! Quick question does it scratch the sides? Or is it safe to use and are the sides still spotless?
The sides are still spotless and no there are no scratches on the device
@@TeknoTalks thank you for your answer! Keep up the video’s road to 10K!
Tks for the tips. Can the screen fitter be used twice or more?
Yes, if you have replacement screen protectors those can be placed inside to use again
👑 Thank you for the easy to understand, step by step video tutorial on how to put on a Spigen EZ Tempered Glass Screen Protector.
I just purchased and received it today from Amazon. Putting it on a iPhone 14 Pro Max. There was a short video to watch how to put it on. Nevertheless it still wasn't to clear for me to understand.
Nevertheless watching your video made it absolutely clear. Especially the part about how to press and slide. I was saying to myself slide what? The entire cover with the phone up and down? 🤔
But it meant your finger on the back of the cover 😂
No problem!
Spigen should pay you for doing this video.
I wish 😂
what’s the difference between the Spigen glastr EZ Fit and glastr Align master? And which one is better?plz reply brother
Another tip I haven't seen is to use a bright white image on your screen as your installing, it will show any small dust or hair much easier
Good tip will keep that in mind
is the kit somehow reusble with other protectors?
I'm not sure, but if a screen protector fits in there, you could probably do it
Very informative and useful
Great and useful video 😉📹👍
Glad it was helpful!
Spigen n.1 forever
How is the oleophobic coating?. Is it any better than others?
Does this screen protector fit any type of iphone phone case?
Do you think using the install kit itself could scratch the screen since it’s hard plastic? Even if it is micro scratches
Probably not as the glass and metal frame are harder than the plastic
does it have 28 drgree privicy angle and fully atomatic aheasion?
Love that guy:)
Is it compatible for 13 pro ?
Yes
That was awesome and super-easy. Thanks!
this aint magic john this is mystic dave
💀
do you need to take the current screen protector off before you do this?
before you use the new one
That’s how you’re usually supposed to do it
Wtf😂
Refills on Ebay
Thank you!
No problem!
Perfect❗️❗️❗️ except there was no mention of top and bottom so of course I put it the wrong way so be careful 😮😮
If you look on the plastic case, you will see |
THE BEST
How is the protector now,does it slide/loosen over time?
Haven't had that happen until I managed to drop it and break it a couple days ago
@@TeknoTalks ok.thanks.
Do the cleaning wipes remove the oleophobic coating on phone screen?
Does this screen protector also protect and cover the front camera?
It doesn't cover the notch
I have the same cutter
Does it get bubbles over time?
Mine stayed perfect for around 4 months as far as I can remember and then I cracked it
@@TeknoTalks what screen protector u using currently? My tempered glass on iphone 13 gets bubble after every 10-15 days and this is my 4th tempered glass
Is it compatible with the Rhinoshield solid suit case?
Not sure as I haven't used that case but it should be compatible with all cases
@@TeknoTalks will it cover extreme phone edges? If not, then it should be compatible
Preso per S23
Is your fav word so
Tempered glass Factory in here. All model glass have, tell me your phone model, I wholesale tempered glass to your country!😅
Is it case friendly
Yep
Yes the quality looks the same and I haven’t had any screen distortions
Or are you using a speigan case
Spigen, caseology, and latercase, no issues so far
What about uag
Or urban armor gear cases
Works with that as well
Hi everyone ❤️
GOTO tempered glass installation is so much easier.
Be kitna saf kroge bhai
😂😂😂 DID SHE SAY SHE PAID $49.95, let me find out apple out her scamming people.
Task time 30 seconds
Video duration 10 minutes 💀💀
I bought this case for my iPhone 14 promax I haven’t had a phone since my 6S plus needed to be recharged about 10 times a day so I just bought the 14 promax and put the screensaver on I have multiple sclerosis my hands don’t work good at all and there’s not one drop of dust under the screen I took the new cover off the phone place this on top of itAnd it took about 10 minutes with me taking my time because I can’t walk and my hands don’t work anybody could put this song it’s the best most lined up screen saver out there when you get a new phone don’t take the protective cover off until you buy one of these and you just take the protective cover off and have this ready drop it on first down in the middle wait 30 seconds and you’re done
4:59 to avoid most of the nonsense talk…..
This phn and this color is troubling me from past few days
Why is that?
@@TeknoTalks I mean I love it so much 😊
Oh ok
@@TeknoTalks 👍
boom
It is a good review. My only suggestion is to talk less. You don’t need to be talking every single second.
I'll keep that in mind, currently trying to put in more cuts so that I can shorten certain parts
Too much actually but thumbs up!
An easy tip is to have a fan going next to the phone.
Lol, never do this way. Many many mistakes
Uggg..another air bubble won’t go away..ugggg
Very bad opening, Poor kid.
the guide is really useless
Ripoff of magic John
Bbbbbbbbb
Spigen really needs to stop using that plastic alignment tool. It's wasteful a one time use tool that then gets thrown away. Like we don't have enough plastic that isn't recycled. They could use a potato starch plastic that easily biodegrades or cardboard.
They have refills on Ebay.
@@mdw0099 Yet, it's pretty rare to need refills.
This is just stupid I have put more than a thousand screen protectors on all sorts of phone bare hands in seconds in the middle of a crowded mall no extra shit needed what is this
A lot of people seem to struggle with placing it on themselves so this helps
@@TeknoTalks I meant the packaging but f these new glasses imo the one where u have the controle of placing on ur own is way easier and better
Mobile phone tempered glass film factory. If you are interested, please contact me