Installation of Carbonrevo Stem Adaptor V3 for Dualtron

This installation video shows the installation of Carbonrevo V3 Stem Adaptor for Dualtron. 3 sizes are available. This is a direct replacement part which allows you to change to an aftermarket stem and handlebar. And you do not even need a shim. It fits all models of Dualtrons. Item is available from Carbonrevo.com. Worldwide shipping available.

[@robertbritt3129]

This is to raise your stem and allow for most handlebars you can get on the bicycle market so you have a huge variety of stem and bars. They offer a badass stem-to-handlebar bracket that mounts on the now 28.5mm higher stem hight and different diameter and mounting. And I have the handlebar pictured and I can recommend it. With stock wires you can only go so far up and this setup is very adjustable and a great feel for riding. Thunder, and eagle pro owner. Have this on my thunder but it would do well on the eagle pro as well as it reduces overall weight and especially rotating weight levered 3 feet from the pivot point at the deck for left and right leaning you really want a feeling as if your just riding the board and the bars are only for slight input and feedback and should barely be used as your board should move you around and you should move the board around and the handle should be a small part of it and this handle really brings the experience home more than just the overall weight reduction.

[@alejobradley]

but if you change to another handlebar you cant fold it and it loses portability

[@jhonjesus6006]

Hello, can I use this adapter with the original handlebar that the eagle pro comes from the factory?

[@vincentfuentes9330]

Hi Carbonrevo. Do you know if this will lower or heighten the position on a Dualtron Storm Limited ( LTD ) from default out of the box set-up?

[@jhonjesus6006]

hola este adaptador puede ser usado por el manillar original del scooter ?

[@lucaspaoletti2349]

Oui avec un potence adaptée. Pas celle d'origine. Dans l'axe de la colonne c'est du 28.6mm et guidon 24.5 normalement

[@el_praciii]

Is that a riser handlebar?

[@pasemes]

Looking for that answer too.

[@alejobradley]

Can I use the original handlebar? I just want to increase the height because Im very tall.

[@lucaspaoletti2349]

Oui avec un potence adaptée. Pas celle d'origine. Dans l'axe de la colonne c'est du 28.6mm et guidon 24.5 normalement

[@Gilleouplus]

Hello, what is the lenght on this adaptor ?

[@Mannn453]

For Spider ???

[@e-scooterrider7099]

and now the cables are short

[@elchulazo2k]

i want this handlebar for my eagle pro but the red one is out of stock lol bad luck for me

[@haroldnhaplorenzo3479]

What size is that?

[@rayamanelly]

What is this modification good for why would I want to do it?

[@SirBattousai21]

rayamanelly if you want to use mtb handlebars

[@peterpadelsky86]

For the use of mt bike bars and for taller riders that want a taller pole.

[@magickawaiiminuts8948]

Adattatore 40mm....standard +40mm

[@jarisipilainen3875]

high power and too much cost then need upgrade everything. is scooter worth it?should be 60% less becouse everything need be upgrade

[@staticseven777]

Don't need upgraded. We just like to customize shit.

[@Vosovogalsyncope]

Does need upgrading. Stems are too short for all this torque.

[@tecnosoluciones9435]

Hello. Is v3 +80mm or V3 +50?

[@carbonrevo659]

Hi, we have 3 sizes in all. The one in the video is +80mm

[@RafaelQuizonvlog]

Can i modified this to another scootet like the my FLJ t113?

[@NANONOS]

25 mm Stem?

[@lucaspaoletti2349]

Je crois oui

[@Merky_Gz]

⚠️barre de direction tordue⚠️
Sinon , pourquoi taper avec un maillet ..? 😢😏

[@carbonrevo659]

Because it is tight and it will be easier to remove it.