Love the content, the framing and composition of the shots. It's lovely to watch and the sound is great. It's one of the reason its a joy to watch this channel. ❤️
That was a very enjoyable video. I watch a handful of RUclips Bee Keeper channels, and I really enjoyed how you carefully explained every step of the operation. Well done. I have been subscribed already and I'm always happy to see one of your videos pop up. Keep up the good work and Merry Christmas to you and yours as well as the rest of your production crew. Take care and, as always, Semper Fi.
My mechanic Dad had a vehicle stored in the back yard that looked like that one. A Packard maybe? That was 60 years ago, in Albuquerque, NM. Hot and dry like the area U R in.
Try to use a hive box with a removable bottom. Put the box on top of the fuel tank with the bottom removed and the bees will all move up into it. If the new hive and old hive are separate, they'll stick around.
I hate getting stung on the hands doing a cutout. BUT!!! I have finally found a great pair of gloves that don't clag up with honey. My expensive bee gloves tend to distort and clag up. If interested I can send a photo and where to get them.
Using rubber bands is asking for more work. The bees perceive the rubber as a permanent fixture and will latently begin to affix the comb to the frame. The first thing you should have done was set the front edge of the bottom board to the edge of the tank. The bees would have marched in with little or no encouragement. What you should have used is three pound tinsel strength string with the frayed edges. It is strong enough to hold the comb in place and light enough for the bees to remove as they attach the comb. This was my first time watching you and you are very entertaining, I hope you don't run into many hybrid bees or else you are in real trouble.
He used string at first, moved to rubber bands on a tip. The bees chew them to pieces and throw them out. The comb gets fixed to the frames. It's in a lot of the previous episodes, which are just as entertaining!
@@bertvereenooghe8162 Thank you for your reply. The objective is to get the comb attached to the frame. Stretched one piece rubber encourages bees not to attach the comb to the frame. When the rubber is severed the comb will fall on the adjacent frames. String on the other hand will remain attached even as the bees remove one side. When rubber gives way it does so all the way around. Bees find the weaker spots on rubber that are amenable to a proboscis probe and make holes. It gets cut as the surroundings, frame and comb are stabilized. Tensioned rubber is never stabilized and bees will utilize it as a permanency and abandon its removal and leave the comb alone. The rubber will eventually break and the bees will pull the comb into an affixed, stable place wherever it has landed. Before the string is completely severed the comb is attached to the frame. Bees are very capable engineers and will adapt to whatever humans throw at them. Rubber or string. I think that rubber is just a beekeeper utilitarian convenience without thought to the honeybee behavior. String requires a little more effort initially, but the end result is the answer. The likelihood of the comb being attached to the frame is much better.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I like watching your VIDEOS ABOUT BEES
This guy gives me major Australian Mr. Bean vibes and I love him for it
When he takes off his clothes and runs around naked with the bees he will be a true manifestation of MR BEAN🙄🥸🙃
Please make an update on the boot bees.
Love the content, the framing and composition of the shots. It's lovely to watch and the sound is great. It's one of the reason its a joy to watch this channel. ❤️
John does an awesome job but frankly I would be entertained by Mark even if it was amateur super 8 stuff.
Thank you so much for both of your kind word 😊
Great job! Did you find the queen? Did the new queen hatch?
I love that Aussies & Brits call car trunks/ truck beds "the boot" of the car! Hello from America from fellow bee lover ♥️🐝
We mainly call the front the bonnet, not always the hood.
That was a lot of fun, those bees were way chilled out, true survivors.Thanks for sharing the video, really enjoyed that! stay safe!
Phew! How hot were you feeling in that suit! Nice work removing that hive.
Awesome rescue thanks for sharing. Love watching your videos and of course more so the bees 🐝 🐝🐝👍👍🐝🐝🐝🍯
Your the funniest youtuber
Great video it’s very entertaining.
I love your merch
Very cool!
Merry Christmas to you both and another awesome vid boys.
Thats a great colony of bee's. 👍🐝
Please let us know what happen to this colony!
That was a very enjoyable video. I watch a handful of RUclips Bee Keeper channels, and I really enjoyed how you carefully explained every step of the operation. Well done. I have been subscribed already and I'm always happy to see one of your videos pop up. Keep up the good work and Merry Christmas to you and yours as well as the rest of your production crew. Take care and, as always, Semper Fi.
My mechanic Dad had a vehicle stored in the back yard that looked like that one. A Packard maybe? That was 60 years ago, in Albuquerque, NM. Hot and dry like the area U R in.
Let us know how the queen turn out.
🐝Oh shoot how fun. They must have wanted to go for a drive.💨
Hi , I was wondering if you ship overseas?
I get so invested in these hives? How Are they doing 😆
Looks like that car is powered by Bee Pee.
Nothing like a good cutout to get the blood pumping!
Is it true bees travel 5k everyday to get to its destination and back
Try to use a hive box with a removable bottom. Put the box on top of the fuel tank with the bottom removed and the bees will all move up into it. If the new hive and old hive are separate, they'll stick around.
Dont start with petrol tank bees, you have enough to answer too with fridges & bees lol
Twas a gas that one eh! 🤣
I have a question
Why not put hive on a sheet then shake the bees infront of hive?
Why does he change into Kermit the frog every now and then lol
I hate getting stung on the hands doing a cutout. BUT!!! I have finally found a great pair of gloves that don't clag up with honey. My expensive bee gloves tend to distort and clag up. If interested I can send a photo and where to get them.
BP Fuel Bees?
Golden Fleece bees is a good name from the age of that car
its a " Standard Vanguard Spacemaster " , I think, they had a Massey Ferguson tractor engine in them
I thought it was the other way around...
Using rubber bands is asking for more work. The bees perceive the rubber as a permanent fixture and will latently begin to affix the comb to the frame. The first thing you should have done
was set the front edge of the bottom board to the edge of the tank. The bees would have marched in with little or no encouragement. What you should have used is three pound tinsel strength
string with the frayed edges. It is strong enough to hold the comb in place and light enough for the bees to remove as they attach the comb. This was my first time watching you and you are
very entertaining, I hope you don't run into many hybrid bees or else you are in real trouble.
He used string at first, moved to rubber bands on a tip. The bees chew them to pieces and throw them out. The comb gets fixed to the frames. It's in a lot of the previous episodes, which are just as entertaining!
@@bertvereenooghe8162 Thank you for your reply. The objective is to get the comb attached to the frame. Stretched one piece rubber encourages bees not to attach the comb to
the frame. When the rubber is severed the comb will fall on the adjacent frames. String on the other hand will remain attached even as the bees remove one side. When rubber gives way it does so all the way around. Bees find the weaker spots on rubber that are amenable to a proboscis probe and make holes. It gets cut as the surroundings, frame and
comb are stabilized. Tensioned rubber is never stabilized and bees will utilize it as a permanency and abandon its removal and leave the comb alone. The rubber will eventually
break and the bees will pull the comb into an affixed, stable place wherever it has landed. Before the string is completely severed the comb is attached to the frame. Bees are very capable engineers and will adapt to whatever humans throw at them. Rubber or string. I think that rubber is just a beekeeper utilitarian convenience without thought to the
honeybee behavior. String requires a little more effort initially, but the end result is the answer. The likelihood of the comb being attached to the frame is much better.
Put rubber bands on your wrist before moving hive so you dont have fish them out of your pocket with gooey hands!
NOO! ..hoped that helped
Its a deserted car in a deserted area so why ?
27:12
There a fugue cage
call it Guzzolene, in memory of Hugh Keays-Byrne
damn I totally forgot pops did this shit with no gloves!
They making a bridge from the fuel tank to the hive
Funny
Lucky no snakes made a home under the car.
Fuel gage
Is it
You can’t open it s
Can’t open s
Bridge
Ha
Your carpet not as dirty
I hate how jolly this guy is 🤬🤬🤬
S
Hate sun
Dirty
I pmu you on your Facebook account
Ss
S
S
S
S