You killed it with this MOD!!!!!! Super happy i found this video. I have an 8.6 sundolphin. I've been looking for practical mods like this for over a year and this is by far the best one I've seen!
I was wanting to know how you setup the motorguide trolling motor on the front with the quick release i dont see how it is bolted down ????? thanks nice setup.
I enjoyed the video! You are very innovative, and I learned a LOT!! One question - did you use some kind of transom bracket for the trolling motor up front? Thank you Sir!
Hey man this might be a dumb question but what type of screws do you use for your mounts. Just bought a bass raider and I’m questioning drilling any holes before I ask someone who has done it.
Very nice! You got that Raider looking amazing. I do miss mine, but still enjoy getting out on the water and doing some fishing. Keep up the great videos.
Brother, I'm not just saying great job. I'm saying, GREAT JOB!! Love the casting deck. The storage underneath is awesome. Wished you lived closer to me. We'd do some serious fishing. I'm in martinsville va. Do more videos.
Hey Man, Great mod!!! What length shaft is your Motorguide Xi3? I also have 10’ Pond Prowler and a 14’ aluminum boat. I wanna make sure I can use the new Motorguide Xi3 I’m going to buy on both boats like you do.
Just subbed you. I mainly use my boat for river fishing. I see when you were towing the jon the waters were pretty choppy. How does your boat handle that. Do you get alot of water in the boat. I was thinking of taking mine out on a couple of reservoirs but I usually use my jon for that but I like the stability of the pontoon better.
Total over on everything, but to each it's own. I have an electric 3.5 hp motor and I'm picking up a gas turbo 5 hp motor. With electric you have to carry too many batteries which means cost and weight.
Is that a Traxxis on the rear? That will be my upgrade (what shaft length?). Currently running an old school Minn Kota with flip handle, gotta weigh 50#, but 100$ on CL.
Enjoyed the ending, had me smiley. I too had to use my pound prowler to tow a much bigger boat to shore. It is a hoot to see a tiny plastic boat coming to the rescue. Keep up the great work.
Great looking modifications on this one man! I want to put a floor in mine and a pedestal seat in the front. I don't want the casting deck, I really just want to have a seat to sit in while fishing that I don't have to raise my legs up to get over the seat frame on the stock one. Not sure how I am going to do that yet. But the Bass Raider looks awesome! Great work!
Same situation! I have the basshunter 120 and I can’t stand having to lift my leg to not step on rods and to get over the stock seat bracket (that tips backward if you put your hand on the back of the chair while lifting leg to get passed. Don’t wanna add the weight of a 9’x2’ sheet of plywood for deck and all pedestal seat bases protrude through the bottom of deck even if wanted to smh.
Great video and really nice work. I've got an xi3 motorguide as well and trying to figure out how to attach it to the front transom mount like you did. Is that something you made or something you bought? And have you found it to be sturdy and not make the plastic boat flex too much? Thank you for any help you can be on this.
Looks good brotha! I love these little plastic pontoons! This was the 1st boat I ever own at 15 years old. I fished out of it for a good decade. I'm gonna have to pick me up another one now. 😆 🤣
Always enjoy seeing people like myself upgrading pelican plastic boats. Nice job on yours... I have an older pelican scorpio that I'm upgrading to keep up with my ever expanding waistline😂
Cool stuff. Man, I wish I would have thought of the tote as a battery box and electrical center, I wouldn't have bought a gas motor. Got some other Ideas out of this though, thanks.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
You killed it with this MOD!!!!!! Super happy i found this video. I have an 8.6 sundolphin. I've been looking for practical mods like this for over a year and this is by far the best one I've seen!
Nice rig and very thoughtful setup.
Id love to get a more detailed wiring video if youre still around and have it!! TIA
Unfortunately I sold this rig
Sweet setup! You should install some shocks for you deck to hold it up when you open it
I thought about that too‼️
How did you mount that trolling motor?
Dude post more videos on this thing.
I was wanting to know how you setup the motorguide trolling motor on the front with the quick release i dont see how it is bolted down ????? thanks nice setup.
I like it 🔥
nice boat bro you did a dope job on it im in the same boat right now
This is badass ngl def prolly gunna pick up ome of there myself
Looks sick
Love it Bruh just got one I'm following a lot of yoor mods
I enjoyed the video! You are very innovative, and I learned a LOT!! One question - did you use some kind of transom bracket for the trolling motor up front? Thank you Sir!
Yes I made a bracket
Anyway you can do a parts list of whats in the big box
Props I wish I had that boat
Damn nice!
Hey man this might be a dumb question but what type of screws do you use for your mounts. Just bought a bass raider and I’m questioning drilling any holes before I ask someone who has done it.
Very nice! You got that Raider looking amazing. I do miss mine, but still enjoy getting out on the water and doing some fishing. Keep up the great videos.
Brother, I'm not just saying great job. I'm saying, GREAT JOB!! Love the casting deck. The storage underneath is awesome. Wished you lived closer to me. We'd do some serious fishing. I'm in martinsville va. Do more videos.
Thanks bro!
Where do you get the mount that hooks onto the transom for the trolling motor
bro thats nice!!!!
Hey Man,
Great mod!!!
What length shaft is your Motorguide Xi3?
I also have 10’ Pond Prowler and a 14’ aluminum boat. I wanna make sure I can use the new Motorguide Xi3 I’m going to buy on both boats like you do.
Just subbed you. I mainly use my boat for river fishing. I see when you were towing the jon the waters were pretty choppy. How does your boat handle that. Do you get alot of water in the boat. I was thinking of taking mine out on a couple of reservoirs but I usually use my jon for that but I like the stability of the pontoon better.
Your made that transducer ? You should definitely patent that !!
Thanks 🙏
really need a video on the xi3 base that you use.
That is one clean build!
How did you mount your trolling motor on the front deck?
From one Bass Raider to another, you put in work! Kudos !
Can you drop a link for the battery box your using?
Bad ass@ boat
Very nice. Thanks for the video.
Total over on everything, but to each it's own. I have an electric 3.5 hp motor and I'm picking up a gas turbo 5 hp motor. With electric you have to carry too many batteries which means cost and weight.
This boat is boss. One of the best bass raider builds I've ever seen. Good work my friend and thanks for the inspiration.
Hey sham nice set up have fun this fishing season and God bless.
Truly a next level build! Makes my repurposed cutting-board mods and gym-mat look like a Jr High arts and crafts project!
Is that a Traxxis on the rear? That will be my upgrade (what shaft length?).
Currently running an old school Minn Kota with flip handle, gotta weigh 50#, but 100$ on CL.
Nice work I see Sham pimp my Raider lol. That guy was lucky you where out there not sure I would have on a day like that
This thing is crazy nice!
Thanks brodie 👊🏾
can you do a video on how you did your lights? How are they wired? Did you drill holes to run the wires? I didn't see any wires.
Bought some, what, foam?
Matt from Tricked Tins sent me to your channel. Great boat and video.
Nice build!!!
One of the neatest mod vids I've seen on these boats. Well explained very informative. Keep em' comin fella ! 🎣
Nice boat man,lot of thought went in to it. Very nice!
Good deal bruh!
Awesome video! Been thinking about getting one
Man your boat looks sick bro!!! Great job. 👍
How did you mount the trolling motor?
Thanks
Ed
Dope setup bro!
Enjoyed the ending, had me smiley. I too had to use my pound prowler to tow a much bigger boat to shore. It is a hoot to see a tiny plastic boat coming to the rescue. Keep up the great work.
How'd you mount the front motor??
I fabricated a motor mount for it
Thanks again for helping us get the boat on the trailer. Keep up the grind man.
😂😂😂😂 all good bro 😎
Yeah thanks for the help buddy!! I really appreciate it! Look forward to seeing you again!
Hi would you help me out to set me up like that if so how much would you change me and where you at in GEORGEA?
So sick!
Nice job building the boat.
This is beautiful dude!
Nice fabrication on that transducer mount! Cool little set up the way you have everything done. Nicely done!!
Fantastic build bro!
Looks awesome and good on you for helping out the guy and his John boat
Nice set up
Awesome built ... what are you using or what's it called where you putting your front trolley motor
The slay machine!! 🔥🔥
Wish they made this in 12 foot
Do you run both motors at the same time?
Yes sir
Amazing mods, great job!!!
Dude you Fire with it!!! Nice!!!
Cool setup man.
super impressive build! thanks for breaking it down for everyone!
Hela or Heba foam. Maybe I’m not understanding? Looks awesome!
Evafoam
Awesome job bro! It looks awesome. I am looking at getting one of these and looking for ideas. Your videos are helpful
Great looking modifications on this one man! I want to put a floor in mine and a pedestal seat in the front. I don't want the casting deck, I really just want to have a seat to sit in while fishing that I don't have to raise my legs up to get over the seat frame on the stock one. Not sure how I am going to do that yet. But the Bass Raider looks awesome! Great work!
Same situation! I have the basshunter 120 and I can’t stand having to lift my leg to not step on rods and to get over the stock seat bracket (that tips backward if you put your hand on the back of the chair while lifting leg to get passed. Don’t wanna add the weight of a 9’x2’ sheet of plywood for deck and all pedestal seat bases protrude through the bottom of deck even if wanted to smh.
Great video and really nice work. I've got an xi3 motorguide as well and trying to figure out how to attach it to the front transom mount like you did. Is that something you made or something you bought? And have you found it to be sturdy and not make the plastic boat flex too much? Thank you for any help you can be on this.
Looks awesome man! Nice work 🤙🎣
Youre a wizard bro. Im gonna try to pull this off
Can you link those bungies across the side I can't find any the right side
Where is the flooring from?
Nice set up, not like other videos where the boat is cluttered
Were are you located? I would like for you to work on mine :)
Atlanta
@@sham4reel Okay, so am I. I sold my old boat and plan to get a new one. When I do I will message you.
I'm in Atlanta as well. Would you be interested in a job to build another similar to yours?@@sham4reel
wow i like the tool box idea, actully i like it all!!! good job and thank you for sharing with us.
well done
Nice looking boat! I glad I got to see your channel before I brought one.
Looks good brotha! I love these little plastic pontoons! This was the 1st boat I ever own at 15 years old. I fished out of it for a good decade. I'm gonna have to pick me up another one now. 😆 🤣
Maybe when your not swamped with builds. I'd like to see that as one of your mini project builds.
Awesome build!
Amazing. I loved it!
Always enjoy seeing people like myself upgrading pelican plastic boats. Nice job on yours...
I have an older pelican scorpio that I'm upgrading to keep up with my ever expanding waistline😂
Cool stuff. Man, I wish I would have thought of the tote as a battery box and electrical center, I wouldn't have bought a gas motor. Got some other Ideas out of this though, thanks.
Looks awesome! Just picked one up too! How much of the decking did you use for yours, looking to make that my first mod!
I used 1 sheet
I want one bro
Nice rig man ! I ✅ 🙂 The stick can be used as a snake basher ! Just in case.
Nice set up