DOES THIS KEY FIT A MERCEDES BENZ CLC 200 CDI 2010 PLEASE? DOES THIS KEY CHECK IF IGNITION SWITCH IS OK? AS IVE JUST HAD ONE FITTED RECENTLY. IF SO? HOW MUCH IS THIS KEY PLEASE & WHERE IS IT AVAILABLE FROM?
Hey man would this be the same issue for a 2010 E350 ? Recently replaced the window regulator pm the car and now it acts like the car in this video. Prior to the replacement the car was working just fine and key fob still unlocks and locks car. Posted a video on my page so you could take a look
I was having the same problem and I Just cleaned my key fob with rubbing alcohol and I also cleaned where the key fits into the ignition and my car started. So, it appears that sometimes it may just be a dirty key fob.
My key won’t open trunk or unlock the doors but my car will read it and unlock and lock the steering wheel it makes the zip noise when I put it in however it won’t crank all lights come on the dash but it won’t crank could this be the key ?
Did they both fail at the same time or have the locks not been working with the key? Test the purple wire at the left front SAM for voltage when attempting to start, that will allow you to know if the key has drive authorization
@@eurowerx4267 I haven’t been able to unlock or lock for a while the no starting issue is new I tried to bypass the relay and it started cracking but it didn’t start I’m debating weather it needs a new key or maybe even a starter
@@eurowerx4267 I’ve done that a couple of times and it works and then doesn’t work now it doesn’t fully work. Waiting for ignition starter relay switch too come.
I have a 2007 Mercedes CLK350 I Got a Brand New Key Program from the dealership Mercedes the doors unlock the lights blink the trunk opens but it won't move out of position one and the steering wheel is locked, I'm also getting a message key is being programmed please wait I've asked a lot of people nobody knows what that means Mercedes says the key does not have any further programming so I'm just stuck at this point what else could I do what's going on and why that message key being programmed please wait
@@eurowerx4267 yeah I left it overnight still nothing? How long could this possibly take? I don't see any red light. What do you mean by I may need a lock? And why are we getting this message on a Brand New Key from Mercedes? Thanks!
I have the exact same issue as you, key won’t respond to car but when I put in someone else’s key in it responds & lets me know it does not belong the vehicle. For reference I have already fixed the steering wheel lock culms once. But I’m being told it’s steering wheel lock again. What do you think ?
After work last night and today driving to work start on first attempt so not sure why it was happening 2x yesterday hopefully it’s good 👍 I have cover over my key fob that might be the reason as well maybe the connection was bad .
If I don’t have a scanner is there another way to tell if it’s just a bad key or if it’s the ignition switch? I literally just bought New starter for $500 just for the mechanic to put it in and tell me it’s not the starter
Damn. Scanner is a must. It could be the key or the ignition switch if you have a second key maybe from another vehicle, if you insert it and you get no response in the cluster like wrong key, all you’ve really done is reduce yourself down to a key or an ignition switch. You’re gonna need a scanner
Hey I have a 2009 c300, my key works to unlock/lock car, but when I put it in the ignition it says “take key out of ignition” any idea on what I should do?
I’m having the same issue I have my old key but it got thrown In the pill it doesn’t work the new key has been working for 8month until now it’s been doing this so what should I do ?
@@eurowerx4267 Thank you bro ! My car been down for some time now. It’s annoying because I know it’s not a big problem, I knew it was something with the key after the fact I was driving with two keys for a week straight then ended up separating the keys, now either of them work 🤷♀️
Just check the cables from the relay to the key fuse inside the car, just moved the cables and car start again ( check the contacr in between cables and fuse) 2 red cables.
mind was the esl lucky it was off when it went saves time put the key every thing was dead nothing new esl in and green key from the main dealers e250 2011 reg before that cam chain went nosiey start up from cold chain and phases replaced
DOES THIS KEY FIT A MERCEDES BENZ CLC 200 CDI 2010 PLEASE? DOES THIS KEY CHECK IF IGNITION SWITCH IS OK? AS IVE JUST HAD ONE FITTED RECENTLY.
IF SO? HOW MUCH IS THIS KEY PLEASE & WHERE IS IT AVAILABLE FROM?
Hey man would this be the same issue for a 2010 E350 ? Recently replaced the window regulator pm the car and now it acts like the car in this video. Prior to the replacement the car was working just fine and key fob still unlocks and locks car. Posted a video on my page so you could take a look
Whats scanner model and brand do you have? Im having same trouble with my 2008 Mercedes 4matic
What device are you using
Autel im608
The Xhorse tool works better though, easier. Im508 is a cheap alternative for DIY folks
I was having the same problem and I Just cleaned my key fob with rubbing alcohol and I also cleaned where the key fits into the ignition and my car started. So, it appears that sometimes it may just be a dirty key fob.
Awesome!!
What device are you using to wake up the eis and tells you key was not valid
No need to wake it up. eis is always able to communicate and see actual values
My key won’t open trunk or unlock the doors but my car will read it and unlock and lock the steering wheel it makes the zip noise when I put it in however it won’t crank all lights come on the dash but it won’t crank could this be the key ?
Did they both fail at the same time or have the locks not been working with the key?
Test the purple wire at the left front SAM for voltage when attempting to start, that will allow you to know if the key has drive authorization
@@eurowerx4267 I haven’t been able to unlock or lock for a while the no starting issue is new I tried to bypass the relay and it started cracking but it didn’t start I’m debating weather it needs a new key or maybe even a starter
I have a 08 c300 doing the same thing so should i buy a replacement key & have it programmed before i tear out the steering column?
Best bet is to have it diagnosed
Ok thz
09 c300 key being initialized please wait? Does this exact same thing. Maybe it’s the starter ignition switch it’ll be here Thursday 🙏
That’s an interesting one. Key or switch. I’d have replaced the key, it being the cheaper item
@@eurowerx4267 I’ve done that a couple of times and it works and then doesn’t work now it doesn’t fully work. Waiting for ignition starter relay switch too come.
I have a 2007 Mercedes CLK350 I Got a Brand New Key Program from the dealership Mercedes the doors unlock the lights blink the trunk opens but it won't move out of position one and the steering wheel is locked, I'm also getting a message key is being programmed please wait I've asked a lot of people nobody knows what that means Mercedes says the key does not have any further programming so I'm just stuck at this point what else could I do what's going on and why that message key being programmed please wait
Leave the key in until that message goes away. The red led may also stay lit until it’s programmed. You may need a lock though
@@eurowerx4267 yeah I left it overnight still nothing? How long could this possibly take? I don't see any red light. What do you mean by I may need a lock? And why are we getting this message on a Brand New Key from Mercedes? Thanks!
@@eurowerx4267 any other ideas I've had the key in there for 12 hours now nothing same message key is being programmed please wait
I have the exact same issue as you, key won’t respond to car but when I put in someone else’s key in it responds & lets me know it does not belong the vehicle. For reference I have already fixed the steering wheel lock culms once. But I’m being told it’s steering wheel lock again. What do you think ?
If you pull fault codes, the lock will set faults. Sounds like a steering lock though
I’m hearing a tick sound from the fuse box in the engine
@@HOTROD256969 me too did you find a solution?
Ot just happened to me too got stuck in valet parking 🙈 can’t be dead battery?
Not if the display is active
After work last night and today driving to work start on first attempt so not sure why it was happening 2x yesterday hopefully it’s good 👍 I have cover over my key fob that might be the reason as well maybe the connection was bad .
New update car totally dead and it was bad battery 🪫 bought new one and it starts like a champ 🔋 👌🚗
If I don’t have a scanner is there another way to tell if it’s just a bad key or if it’s the ignition switch?
I literally just bought New starter for $500 just for the mechanic to put it in and tell me it’s not the starter
Damn. Scanner is a must.
It could be the key or the ignition switch if you have a second key maybe from another vehicle, if you insert it and you get no response in the cluster like wrong key, all you’ve really done is reduce yourself down to a key or an ignition switch. You’re gonna need a scanner
Hey I have a 2009 c300, my key works to unlock/lock car, but when I put it in the ignition it says “take key out of ignition” any idea on what I should do?
Have you got a second key?
That sounds like a key but it helps to be able to see actual values with a scan tool
@@eurowerx4267 I can’t turn the car on to scan it😢I don’t have another key either and I’m assuming it would take a long time to arrive
@@SanDiegoBoxes place key In ignition and turn it, it’ll still scan and read EIS fault codes
I’m having the same issue I have my old key but it got thrown In the pill it doesn’t work the new key has been working for 8month until now it’s been doing this so what should I do ?
Pool*
I have a 2004 c240 i left the key in the ignition when i came back try to start .it wont wake up or turn .no sound nothing .no turn no click
@@MrRohanstar probably killed the battery
what is this metal hoop called, I looked on ebay and other areas but no luck. I am hoping the correct title will assist me in getting it.
Search , Mercedes EIS tester
There listed, $15
@@eurowerx4267 what does the hoop do ? If you actually found the answer with the scanner?
@@Dashikardashian the hoop just react to the presence of voltage. It lets me know the EIS is awake and responding.
Try bmw CAS tester on eBay
@@eurowerx4267 Thank you bro ! My car been down for some time now. It’s annoying because I know it’s not a big problem, I knew it was something with the key after the fact I was driving with two keys for a week straight then ended up separating the keys, now either of them work 🤷♀️
Does glk fuse box work on c300?
What year was this car
204 chassis starting in 08
207 and 212 same process
I was thinking of buying a c class 08 with steering wheel locked up. Person said the dealership wants 1700 to fix.
Just check the cables from the relay to the key fuse inside the car, just moved the cables and car start again ( check the contacr in between cables and fuse) 2 red cables.
We’re is it at tho
You not helping without telling the exact locations 🤷🏽♂️🤷🏽♂️
So if this EIS failure or steering lock failure
Bad key!
@@eurowerx4267 so if it said steering lock failure I need a new key ?
@@eurowerx4267 lmk ASAP !
What is the scanner called?
@@JaniceEllingsworth-mj4ou autel ultra scanner .
Thank you soo much!!!
Where is the best place to get a key and how do you get it programmed
Dealer. Comes programmed
Or lock Smith
I have same problem,can u tell me what to do?
Tough to say! Post a video I can reply to
What years
Thank for making this video.
I never saw how you fit the device to the Ignition Switch .
Connected to the OBD port
Sometimes my key fob won't register being in the slot... so I lick it!
😮
Not clear at all. Which key starts the car? Pls make a good video
mind was the esl lucky it was off when it went saves time put the key every thing was dead nothing new esl in and green key from the main dealers e250 2011 reg before that cam chain went nosiey start up from cold chain and phases replaced
Can you post more vids with your scanner
Mine wont turn .stick in no sound nothing
@@MrRohanstar possible steering lock! Gotta be diagnosed! If the key works the power locks, suspect steering lock
Just had trouble with mines on Sunday Mercedes Benz charging me 1,800
Ouch!!
They’re charging me $2700 to replace steering wheel column
Don’t know what you did???
Watch it again, it was very thorough