Thank you for sharing this. I'm loving my 125X but feel it's time to address the clutch fade issue when riding in technical sections. I was blown away by how well the bike handles slow technical riding though. Also considering going with 13/52 gearing to make 2nd and 3rd gear a little more useable and make it easier to ride a gear higher for better control.
Good timing on this video. I’m really interested in one of these units as we’ve gotten into a lot is super slow hard enduro type stuff and I’m clutching my brains out.
Lmao, I put a Hymec system on my '21 YZ250 this winter. Got a "shorty" lever, a Hammerhead anodized resevoir cap, love the Magura's. But put a new top end on today...finally, fired the bike up......and the clutch wasn't compressing enough. So I snapped....and realized 5 min layer that I had put the wrong spacer on. Whoops.
What do you think of the 125x ? I'd like to hear what you think about it after riding it for a bit now. I've got one on order for January. Great video and content, thanks!!
I’ve got a couple of my races on the channel where I talk more in depth about the bike. I love it. I thought maybe I would get bored with it but the more you ride a 125 the more comfortable you get on one. It’s great
This was a 2021. I think they made changes to the 23 and I'm not 100% sure magura put any focus on building one for that bike yet. sorry, I wish I had better info.
I bought this hydro clutch kit and lever after i saw this video. How did you mount the lever with the correct plunger for it all to work. i couldn't see very clearly in the video how you did it.
@@woodrumracingvlogs okay I got the same one, now I couldn’t see in the video, did you modify your clutch perch? Because it looks like it’s not a direct fit
@@woodrumracingvlogs When you hooked the actuator arm up to the hymec rod, did the actuator arm pull the rod down? When I hooked the actuator arm up to my hymec set up on my yz 250 the hymec rod didn’t have any tension on it from the actuator arm so I couldn’t pull in my clutch at all it was like a brick wall
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
Thank you for sharing this. I'm loving my 125X but feel it's time to address the clutch fade issue when riding in technical sections. I was blown away by how well the bike handles slow technical riding though. Also considering going with 13/52 gearing to make 2nd and 3rd gear a little more useable and make it easier to ride a gear higher for better control.
The model nbr you hare for the FLO is for KTM. Lucky it worked for you.
Good timing on this video. I’m really interested in one of these units as we’ve gotten into a lot is super slow hard enduro type stuff and I’m clutching my brains out.
That bike is sweet im getting one this spring.
Thank you bro!
Lmao, I put a Hymec system on my '21 YZ250 this winter. Got a "shorty" lever, a Hammerhead anodized resevoir cap, love the Magura's. But put a new top end on today...finally, fired the bike up......and the clutch wasn't compressing enough. So I snapped....and realized 5 min layer that I had put the wrong spacer on. Whoops.
What do you think of the 125x ? I'd like to hear what you think about it after riding it for a bit now. I've got one on order for January. Great video and content, thanks!!
I’ve got a couple of my races on the channel where I talk more in depth about the bike. I love it. I thought maybe I would get bored with it but the more you ride a 125 the more comfortable you get on one. It’s great
nice walkthrough, thanks for posting. Can you please post which lever you put on?
When is part 2 of the kx100 build coming out
We are still waiting on a few parts to come in and the graphics to come back. We're guessing it's going to be a few more weeks. Sorry
Hi there!! Nice video. Can you tell us what part number you got? I have a Yz250x I would like to upgrade to but not sure what part I need.
Yes. WPS part number 17-9603
What's the Magura part number? If you have it.
Where did you find this clutch system at? I've been looking everywhere for one for my 23 125x and I can't find one
This was a 2021. I think they made changes to the 23 and I'm not 100% sure magura put any focus on building one for that bike yet. sorry, I wish I had better info.
I bought this hydro clutch kit and lever after i saw this video. How did you mount the lever with the correct plunger for it all to work. i couldn't see very clearly in the video how you did it.
Sorry, I just saw this. I used a Flo lever. I used their application chart for a 14-22 Husky. WPS part number 122-0727. Hope this helps!
@@woodrumracingvlogs okay I got the same one, now I couldn’t see in the video, did you modify your clutch perch? Because it looks like it’s not a direct fit
Hi. Does anyone know if PRO TAPER XPS is compatible with HYMEC?
Hymec clutch link?
Did you find the throw on the actuator arm to be a bit less than with the cable?
I haven't noticed that.
@@woodrumracingvlogs When you hooked the actuator arm up to the hymec rod, did the actuator arm pull the rod down? When I hooked the actuator arm up to my hymec set up on my yz 250 the hymec rod didn’t have any tension on it from the actuator arm so I couldn’t pull in my clutch at all it was like a brick wall
What brand lever did you put on?
Flo Motorsports. Part number 122-0727 $69.95. Have not been able to break one yet
What is the specifacations on the kit you got I don't know what size kit to get.
It's been a minute since I did this. I think I commented the part number at one point. Let me check.
Why in gods name would you put a mikuni on a YZ
Are you referring to the Mikuni carb that came on the bike stock or did you think I put that on there?
@@woodrumracingvlogs ah well it was to my knowledge yz’s came with Keihin carbs
@@woodrumracingvlogs geuss you learn something new everyday
Hahah. Haven’t really had any issues with the Mikuni. We came off of KX’s with Keihin’s and I didn’t really have many issues with those either.
What Bike Did You Have To Put In To Get The Right Lever To Fit