FREQUENTLY ASKED QUESTIONS Where do I buy the parts and tools needed for this job? ▶️BUY PS4 PRO BLOD REPAIR KIT: www.fasttech.ca/playstation-4-pro/ps4-pro-blod-repair-kit ▶️BUY FULL SCREWDRIVER TOOLKIT: www.fasttech.ca/tools/fasttech-electronics-repair-toolkit ▶️BUY T8H SCREWDRIVER ONLY: www.fasttech.ca/tools/torx-t8h-screwdriver 👉 Thermal Paste: www.fasttech.ca/macbook-air-13/arctic-silver-thermal-paste ▶️VLOG CHANNEL: ruclips.net/channel/UCF2IPXKRX5ctN9td1rhkzHg 👉 NEED HELP? FaceTime/Zoom Video Call Me: www.fasttech.ca/online-consultation 👉 GET REPAIR SERVICE FOR YOUR DEVICE: www.fasttech.ca/electronics-repair
Do you have a link for your other video involving reapplying the thermal paste? I want to have a rough idea of what to do before I start ordering tools and parts.
This video is out of order. Putting a washer on your PS4 is going to make it worse! The APU needs REBALLING, not a tiny washer putting even more uneven pressure on the solder balls to make it rip traces up as time goes on. Not to mention warping the motherboard so it ends up beyond repair when the console does die again... AND IT WILL!
This is a common issue with alot of consoles. It gets hot and sometimes one or more of the solder balls looses connection. If this doesn't happen to work then it needs to be re ball'd. This fix should be considered temporary although you may get lucky and have it last a long time. If this happens to you I strongly suggest adding new thermal paste along with your repair.
@@freshprince2.0 what your seeing here is not a fix and 90% of the time the console has been dropped and what happens is the apu the chip ends up with no connection to the board and sometimes inside the apu gets damaged if it's a solder joint it need removed and solder back down and that doesn't always work but what your seeing here is not a fix even if it works its still not a fix not a damn thing was repaired all your seeing is bs from youtubers that usually cause a young person to break there stuff beyond being repaired
Mine started acting up again today, do I replace the washers with new ones, only need this ps4 to work till next month when I get a ps5, also have a disc currently in the ps4
Look, i know that fix works most of the time but the ps4 you fixed and the one you turned on at the end looks like 2 differnet consoles. The one at the end of the video looks white but can probably be the lighting however that one has a chip on the front panel and the black one you were working on did not. HONESTLY I am not a hater just feel like your initial fix on the first part of your video did not work?
Thanks man I had to use 2 washers but worked like a charm when I put the second one in. Subscribed and liked, I was going to get the kit shown in the video but seen it after I bought a different one.
@@sleezywalk420 Yeah it’s not the lyrics you missing a bunch of words. Lemme help you out: “Biggie Biggie Biggie can’t you see, Sometimes your words just Hypnotize me, And I just love your flashy ways I, Guess that’s why they broke and you’re so paid” you’re welcome lol
Thanks for the vid. Timely as mine was working fine last night and today it just decided to fuck right off. Gonna order the kit and hopefully this fixes it. Wish me luck!
Yea I have one of the first versions of the PS4 and this is what’s happening like it won’t turn white . And last time I tried dis it didn’t work because I have the different version that looks just like the inside of the pro so ama do the same thing u did and hopefully it does cus I’ve tried everything and my ps4 is the last thing I wanna lose 😭
I have tried this method twice and my PS4 still has the Blue Light Of Death, is their any other option I can try? I have a lot of stuff on my PS4 I don't want to lose and I'd be willing to buy a new one as long as I can save all of my old stuff to a backup save.
I have a PS4 that turns on and the fan revs up getting faster and faster to full speed then the console just shuts off and beeps. Hey biggie biggie can't you see, sometimes your words just hypnotize me.
@@fasttechvideo Also there was no signal when plugged into the TV. And yes I had it on the right input. Would that be that the TV I tried it on wasn't 4K or will the system just choose 1080?
Hey i have a different problem. My ps starts with the checking system storage status it completes that and then restarts with the blue light of death . I tried reinitiallizing from safe mode and just restarts amd give me the blod again . Also i tried your method with washer and i still have the problem . What i have to do?
What if is just blue doesnt flash turns off after few seconds doesnt beep when turns off. doesnt beep twice when power button held i found vape juice on my ps4 pro dont know how got on board ive cleaned useing cotton is no burnt board or no burnt solder no burnt chips was alot of burnt juice not turning backon hanging until can afford to purchase component cleaner & give it a isopropyl alcohol bath & spray after useing component cleaner probs wasted money afterwards i dont know
What do you call the plastic cover with washer that you screwed on the heat sync cover? Also are those washers made of metal? Aluminum or stainless steel
Mine still has the BLOD does that mean I have to add the 2nd washer. Also my ps4 had a damn heat shield on it! Do any of you know how stressful it is getting it off? It feels like you’re doing surgery on an organ!
They gave me a bag of washers like 100 pack!!! I have two questions for fast tech!! 1. Is it bad to use a three prong cable even though PlayStation only had two prongs on back of ps4 pro? 2. When I take the top of my ps4 off and the tin metal with all the screws my area where you put washers looks different than yours in video? Is that ok? Yours looks like a hurricane and only had two screws, mine has an X with four screws??
How did you know that was that and not the cable or the power supply I have the same problem .. I turn on and then the blue light on then turn off right away …
Hey I have a different problem. My ps starts with the "checking system storage status", it completes that and then restarts with the blue light of death. I tried reinitializing from safe mode(it starts in safe mode) and it just restarts and give me the BLOD again. What do I do?
Bro same. I’m able to sometimes play the console, but it’s a never ending cycle of what you explained. Some days it works, some days it doesn’t. I’m fixing to go to Harbour Freights and get the tools, and if it fixes the console by the time I’m done. I’ll let you know!
@@orangehilo9414 did you try to reset to factory settings..it will remove all saved data tho.so do a save on cloud or other HD. but i would try to swap out the hard drive .with a 1tb..uograde.
After I changed the thermal paste I reassembled it and when I turned it on there was a bip and the blue light turn on but after 2 or 3 seconds it turned off and I don’t know what to do, I’ve also noticed that the power supply was a stuck
Problem is these companies skimp on cooling. Had Microsoft put a bigger cooler on the OG 360 the RROD wouldn't be a thing. Same with Sony and the PS3/PS4. Wish these companies would add fan adjustment in the settings, but have a minimum so people don't burn their systems up. I don't mind a little noise if my system stays cool.
Can you explain why it work ? I Mean, the more tuto i look, the more it's confusing. Why some says that you must not tide te screw to much and other said the opposite ? How this affect the CPU ?
My issue is the blue light blinks once and then cut off what you showed me on this video would that solve my issue????? Cuz the first time it did it I had a disc in there and then I went and put a little screwdriver in there to remove the disc and then plugged it up and then it worked again I call myself doing it again and it didn't work Blue light once and then cut off it won't come back on until I unplug it and it still do the same thing blue light once and then cut off please tell me what I can do
3 weeks ago during weekend I was playing a lot of PS4 Pro, and it turned off itself. I had this problem that the blue light turned on only once. I did this process, and it solved temporary the problem. Now, two weeks later, I was also playing a lot during weekend, and same thing happened. I tried to repeat, but this time it doesn't turn on. Any idea what can it be wrong ? How can I solve it this time ? Do you have another video with a replacement of a thermal paste ?
Did you use the correct spec washer from the description box. Yes we do have a thermal paste replacement guide for ps4 pro. Watch our ps4 pro is too hot video.
I tried 2 washers and still has not worked it beeps for 1 second light turns blue on for one second and then turns off automatically after that one second i need some help please anyone?
Guess I better clean out my Pro and swap thermal paste again to AVOID this. Its been over a year since I watched one of you're videos to help me take apart my pro and clean the fan and swap thermal paste and man is was SUPER QUIET for about a year. Also my Pro is the day 1 release with the loudest fan. Highly recommend cleaning your Ps4 or Ps4 pro out at least once a year and the fan too and cleaning and adding new paste. Last time I used Arctic Silver 5. Might use that again or maybe the Grizzly brand.
I've got this model and some days i'll turn on the ps4 and it beeps, blue light flashes then turns off immediately. I'll leave it for about 15-20 hours and it works for a while. Is this still considered BLOFD? I cleaned out the air filter and replaced the thermite paste like instructed in the other video, the only thing I haven't tried is putting these washers on. In my case do you really think this idea would be effective? I dont want to buy this whole kit and waste my money. This has been draining enough dealing with this crap.
Omg just bend the flex plate a little so it gets tighter. This is a old ps3 fix that dont work 70% of the time. ig you have a ylod problem the ps4 needs reballing it will just birk. I wood just change the termal paste maby bend the flex a little if you have it apart a few times before. Those spacers are a waist sorry but thats the facts.
Probably the wrong spec washers but if they are the right one bought from our link you could have an issue with the APU chip itself or the motherboard.
FREQUENTLY ASKED QUESTIONS
Where do I buy the parts and tools needed for this job?
▶️BUY PS4 PRO BLOD REPAIR KIT: www.fasttech.ca/playstation-4-pro/ps4-pro-blod-repair-kit
▶️BUY FULL SCREWDRIVER TOOLKIT: www.fasttech.ca/tools/fasttech-electronics-repair-toolkit
▶️BUY T8H SCREWDRIVER ONLY: www.fasttech.ca/tools/torx-t8h-screwdriver
👉 Thermal Paste: www.fasttech.ca/macbook-air-13/arctic-silver-thermal-paste
▶️VLOG CHANNEL: ruclips.net/channel/UCF2IPXKRX5ctN9td1rhkzHg
👉 NEED HELP? FaceTime/Zoom Video Call Me: www.fasttech.ca/online-consultation
👉 GET REPAIR SERVICE FOR YOUR DEVICE: www.fasttech.ca/electronics-repair
Do you have a link for your other video involving reapplying the thermal paste? I want to have a rough idea of what to do before I start ordering tools and parts.
Do y'all still do repairs? This happened to my ps4 pro and I was wondering if I could send it in and how much it would cost
Dude had faith
Thanks ❤❤❤❤❤
I would probably test it for before putting all those screws back in but otherwise a very helpful tutorial.
This video is out of order. Putting a washer on your PS4 is going to make it worse! The APU needs REBALLING, not a tiny washer putting even more uneven pressure on the solder balls to make it rip traces up as time goes on. Not to mention warping the motherboard so it ends up beyond repair when the console does die again... AND IT WILL!
What should we do then
Thank you very much man, I was a little surprised it worked like a charm
Don’t forget to like the video and subscribe. Thanks for watching.
This is a common issue with alot of consoles. It gets hot and sometimes one or more of the solder balls looses connection. If this doesn't happen to work then it needs to be re ball'd. This fix should be considered temporary although you may get lucky and have it last a long time. If this happens to you I strongly suggest adding new thermal paste along with your repair.
What needs to be replaced?
@@freshprince2.0 what your seeing here is not a fix and 90% of the time the console has been dropped and what happens is the apu the chip ends up with no connection to the board and sometimes inside the apu gets damaged if it's a solder joint it need removed and solder back down and that doesn't always work but what your seeing here is not a fix even if it works its still not a fix not a damn thing was repaired all your seeing is bs from youtubers that usually cause a young person to break there stuff beyond being repaired
Mine started acting up again today, do I replace the washers with new ones, only need this ps4 to work till next month when I get a ps5, also have a disc currently in the ps4
Can't believe it but this worked for me. Cleaned re pasted CPU, but would not boot. Many thanks
Awesome. Please subscribe and like the video
Your comment is contradictory. It worked or not??
This video saved me a trip to the technician! Much appreciated 🙏🏽
You're welcome. Please like the video and subscribe to help me back :)
Look, i know that fix works most of the time but the ps4 you fixed and the one you turned on at the end looks like 2 differnet consoles. The one at the end of the video looks white but can probably be the lighting however that one has a chip on the front panel and the black one you were working on did not. HONESTLY I am not a hater just feel like your initial fix on the first part of your video did not work?
Dw bro its just the lighting
Thanks Thanks Thanks it is work Thanks man الف شكرا على الفيديو نجحت الطريقة ❤❤❤❤❤❤❤
Youre welcome please like the video and subscribe
THIS WORKED. GREAT VIDEO THANK YOU SO MUCH!!!
Thanks man I had to use 2 washers but worked like a charm when I put the second one in. Subscribed and liked, I was going to get the kit shown in the video but seen it after I bought a different one.
Ik this comment is old but how long did the PS4 last with that method
Hello! which size of washers did you use?
Check the links in the description box and top comment.
OMG IT WORKS
I love you thank you, I was desperate 😭
@@ouchi. thanks for your comment. Please like and subscribe the video to help me back
„Biggie biggie biggie can’t you see the way you hypnotise me“
That’s not the lyrics
@@globoyclips2k Lol what 🤣
@@sleezywalk420 Yeah it’s not the lyrics you missing a bunch of words. Lemme help you out:
“Biggie Biggie Biggie can’t you see, Sometimes your words just Hypnotize me, And I just love your flashy ways I, Guess that’s why they broke and you’re so paid” you’re welcome lol
@@deepncider Yeah I know but I don’t wanna write the whole lyrics 😂 everybody know what I mean.
Merci, cela m'a été très utile pour ma PS4 pro. Elle fonctionne à nouveau. 👍
Mine was way more simpler I only had to change my resolution in safe mode and that's it
Thanks for the vid. Timely as mine was working fine last night and today it just decided to fuck right off. Gonna order the kit and hopefully this fixes it. Wish me luck!
Tiago Valadares Good luck and thank you for your order 🙂
Has this worked?
Make sure yall try safe mode options before doing this i just got blue light of death and fixed by going sade mode and updating system software
Thank you bro!, I done it and it worked, I highly recommend everyone try this before anything again bro thank you!
Doesn’t work
Yea I have one of the first versions of the PS4 and this is what’s happening like it won’t turn white . And last time I tried dis it didn’t work because I have the different version that looks just like the inside of the pro so ama do the same thing u did and hopefully it does cus I’ve tried everything and my ps4 is the last thing I wanna lose 😭
I have tried this method twice and my PS4 still has the Blue Light Of Death, is their any other option I can try? I have a lot of stuff on my PS4 I don't want to lose and I'd be willing to buy a new one as long as I can save all of my old stuff to a backup save.
Did you use the spacers from our kit?
I have a PS4 that turns on and the fan revs up getting faster and faster to full speed then the console just shuts off and beeps.
Hey biggie biggie can't you see, sometimes your words just hypnotize me.
Watch our PS4 Pro is too hot video. The problem is caused by dust buildup in the heatsink.
@@fasttechvideo Also there was no signal when plugged into the TV. And yes I had it on the right input. Would that be that the TV I tried it on wasn't 4K or will the system just choose 1080?
Or unplug it and plug it back in.
Worked for me...
What if I wanted to repair it the right way without a washer ? What would be the right part to replace & where could I get one
fixed thanks dude
Just fixed my ps4 literally right now lmfao appreciate the video 🔥🔥💪🏻🤞🏼
Don’t forget to like the video and subscribe!
@@fasttechvideo do u have to have a torx screwdriver
@@kailluminatiii2999 yes a torx T8H. Links in the description box and top comment.
hey has this trick fixed your console permanently or did the problem arise again?
What size washer is it?
My Ps4 is dead now.Whats wrong?
Hey i have a different problem. My ps starts with the checking system storage status it completes that and then restarts with the blue light of death . I tried reinitiallizing from safe mode and just restarts amd give me the blod again . Also i tried your method with washer and i still have the problem . What i have to do?
I never knew about blue light of death and that is what my PS4 pro is doing and it does not turn on.
Have u fixed it yet and if yes how
Aaron TheStreamerBTW nope I haven't but I sold it to my friend and I'm buying the ps5
thank you so much! I changed my thermal paste and put that fitting upside down))
You’re welcome. Please drop a like on the video and subscribe 😊
What if is just blue doesnt flash turns off after few seconds doesnt beep when turns off. doesnt beep twice when power button held i found vape juice on my ps4 pro dont know how got on board ive cleaned useing cotton is no burnt board or no burnt solder no burnt chips was alot of burnt juice not turning backon hanging until can afford to purchase component cleaner & give it a isopropyl alcohol bath & spray after useing component cleaner probs wasted money afterwards i dont know
I'll change the thermal paste and try this if it helps.
Please let us know how it went.
Why would fully reassemble to test it?
What do you call the plastic cover with washer that you screwed on the heat sync cover? Also are those washers made of metal? Aluminum or stainless steel
Hi @fasttech , thanks for the video. I followed those steps and unfortunately no luck, blue light remains, any other advice pls? Thanks!
Do a reflow on the APU chip
They need some more screws in that thing. Lol
Hahaha
It isn’t work on my PS4 pro model 7001B. The APU clamps look like X. Any idea?
The hypnotize lyrics are in my head
Do you sell just the spacers. I have all the tools and everything needed to fix it besides the spacers.
Yes we do sell spacers only. Check this listing and pick the $14.99 option.
Mine still has the BLOD does that mean I have to add the 2nd washer. Also my ps4 had a damn heat shield on it! Do any of you know how stressful it is getting it off? It feels like you’re doing surgery on an organ!
PLEASE HELP‼️‼️ when I turn it on it does the system software update thing and then when it’s completed i get the blod
What happens if a ps4 doesn’t have any thermal paste
Is it will work on my CUH-721?
Yes
Not eared of washer method before if this worked most would be useing the same method y thecodr3 doesnt use this method
did not worked for me , i even put 2 washers, what else can i check ?
They gave me a bag of washers like 100 pack!!! I have two questions for fast tech!!
1. Is it bad to use a three prong cable even though PlayStation only had two prongs on back of ps4 pro?
2. When I take the top of my ps4 off and the tin metal with all the screws my area where you put washers looks different than yours in video? Is that ok? Yours looks like a hurricane and only had two screws, mine has an X with four screws??
My PlayStation pro is the same as yours…please let me know if you get an answer because I have tried everything else
How did you know that was that and not the cable or the power supply I have the same problem .. I turn on and then the blue light on then turn off right away …
If you have to u unplug the system for it to even turn on and blod again u need a new power supply.
Hey I have a different problem. My ps starts with the "checking system storage status", it completes that and then restarts with the blue light of death. I tried reinitializing from safe mode(it starts in safe mode) and it just restarts and give me the BLOD again. What do I do?
I got same problem
Bro same. I’m able to sometimes play the console, but it’s a never ending cycle of what you explained. Some days it works, some days it doesn’t. I’m fixing to go to Harbour Freights and get the tools, and if it fixes the console by the time I’m done. I’ll let you know!
Change the hard drive
You think that may do the trick as well?
@@orangehilo9414 did you try to reset to factory settings..it will remove all saved data tho.so do a save on cloud or other HD. but i would try to swap out the hard drive .with a 1tb..uograde.
After I changed the thermal paste I reassembled it and when I turned it on there was a bip and the blue light turn on but after 2 or 3 seconds it turned off and I don’t know what to do, I’ve also noticed that the power supply was a stuck
Check the pins under the power supply. If that doesn’t work watch our BLOD repair video.
My PS4 button does not wanna work I tried everything to turn it on but no luck plz help
Check the pins under the power supply and make sure they are not bent.
Hello do maybe know what is problem i clean my console then fix again and i try stard and made just 3 pip sound and this is this
I did exactly what you said in this video yet I’m having the same issue BLOD
Did you use the correct size spacer we used?
Problem is these companies skimp on cooling. Had Microsoft put a bigger cooler on the OG 360 the RROD wouldn't be a thing. Same with Sony and the PS3/PS4.
Wish these companies would add fan adjustment in the settings, but have a minimum so people don't burn their systems up. I don't mind a little noise if my system stays cool.
how thick is the washer
This didn’t work for me… any other ideas?
What size of washer u put??
Please refer to my other comment/response
So any thoughts on if after doing this... still just beeps once then turns off???
Im guessing you didnt use the correct spacer we listed?
i gotta ps4 yesterday but its a blod will a new board fix it
my light is going blue and white is there a fix
Good Job
Thank you!
Thank you so much. Please like the video and subscribe if you haven't already.
ps5 blue death light led error... no cpu socket.. reballing cpu..playstation5 Blue Light Fix / Luz Azul Reparada
Why in my 4pro is crosspiece binding?
Can you explain why it work ? I Mean, the more tuto i look, the more it's confusing. Why some says that you must not tide te screw to much and other said the opposite ? How this affect the CPU ?
Its adds pressure on the APU chip which causes it to make contact with the board again (if solder balls underneath were the issue)
@@fasttechvideo Make sens, thanks but make it hard to know wich pressure is the best.
@@dansimsss we sell the kit on our site. Links in the description box and top comment.
how reliable is washer fix?
Where can I buy the disk thingy
Hi I switch mine on and I hear a small electric shock or static and then it switches off any ideas?
It sounds like a power supply issue. Please check out our channel for PS4 power supply replacement.
Fasttech I replaced it. I’m still getting the bloody noise
@@keenobeast5920 probably a mobo fault
@@keenobeast5920hey champ , did you later fix it and how please
The System now reboots again but when it restarts the bleu Light stays agian
Do you see anything on screen?
My issue is the blue light blinks once and then cut off what you showed me on this video would that solve my issue????? Cuz the first time it did it I had a disc in there and then I went and put a little screwdriver in there to remove the disc and then plugged it up and then it worked again I call myself doing it again and it didn't work Blue light once and then cut off it won't come back on until I unplug it and it still do the same thing blue light once and then cut off please tell me what I can do
Yes
can i use any washer size?
No
Are metal washers ok to use? I thought rubber was better
Rubber will lose its shape with heat. It will only work for a short amount of time.
What if it does this but sometimes I'll get lucky and it will turn on?
Early stages of BLOD. It will get worse over time.
For sure this is only an intermediate solution. It may last for 2 days or for a year. There is already a definite problem with the APU solder joints.
3 weeks ago during weekend I was playing a lot of PS4 Pro, and it turned off itself.
I had this problem that the blue light turned on only once.
I did this process, and it solved temporary the problem.
Now, two weeks later, I was also playing a lot during weekend, and same thing happened.
I tried to repeat, but this time it doesn't turn on.
Any idea what can it be wrong ? How can I solve it this time ?
Do you have another video with a replacement of a thermal paste ?
Did you use the correct spec washer from the description box. Yes we do have a thermal paste replacement guide for ps4 pro. Watch our ps4 pro is too hot video.
how much extra did you charge for reapplying the thermal paste?
Please email service@fasttechstore.com
I try it but why it doesnt work?
Is this fix permanent?
In most cases yes
what size washers do you use?
Have you tried updating software in safemode
@@Crlszto does that fix the issue?
Yus
@@Crlszto ok I’ll try
@@logiic8835 did it work?
Yo bro you think you can help me out because my ps4 be overheating and I’m not secure enough to do it myself thinking I’m going to mess up
Alexis Aguirre You can send it in for service if you like.
I did everything step by step but didnt work
Thank you so much! where can i donate something?
No we do not take donations. You can subscribe to our channel and keep us in mind if you need any parts in the future. That helps us out a lot. Thanks
Hey I ordered a hard dive was wondering when it should arrive
4-5 business days if you are in US or Canada.
Sahib Dhaliwal yea got it
Sahib Dhaliwal it works too
The blue light of death never heard of it till today I mean I get the blue lights but then it turns white so I’m a good?
Yes. Blod is if it stays blue and doesn't change at all
P
Whats the size of the washer? Is it m3?
I'm from the Philippines btw
So sweet bisa bagus setelah pakai metal gitu
Achi 6500+ ps4 bga kit (flux+stencil)
It didnt work for me😭
My ps4 fan is very loud when running fortnite but is never overheats, do you know what the problem is?
the model is a CUH-1215A
Grey King you need to clean out your heatsink and replace the thermal paste. Watch my PS4 Too Hot 1215 video on this channel.
Fasttech thank you i didn’t want to take apart my ps4 without know what’s was wrong with it once again thx
I tried 2 washers and still has not worked it beeps for 1 second light turns blue on for one second and then turns off automatically after that one second i need some help please anyone?
Any fix still?
Also my PS4 won't enter safe mode. I hold the button for 7 seconds, and it just turns back off.
Watch my PS4 Safe Mode guide. You are supposed to release the power button after the second beep.
Mines still doing the light of death 😒
Try doing a reflow on the APU chip
Guess I better clean out my Pro and swap thermal paste again to AVOID this. Its been over a year since I watched one of you're videos to help me take apart my pro and clean the fan and swap thermal paste and man is was SUPER QUIET for about a year. Also my Pro is the day 1 release with the loudest fan. Highly recommend cleaning your Ps4 or Ps4 pro out at least once a year and the fan too and cleaning and adding new paste. Last time I used Arctic Silver 5. Might use that again or maybe the Grizzly brand.
For how long wil it keep working ?
I have seen PS4s go anywhere from 1 year to 4+ years and going strong with this method.
Dude you act like I have a saudering matching lying around
Playing rap, can't seem to get to the point.
The player hatin dont stop.
I've got this model and some days i'll turn on the ps4 and it beeps, blue light flashes then turns off immediately. I'll leave it for about 15-20 hours and it works for a while. Is this still considered BLOFD? I cleaned out the air filter and replaced the thermite paste like instructed in the other video, the only thing I haven't tried is putting these washers on. In my case do you really think this idea would be effective? I dont want to buy this whole kit and waste my money. This has been draining enough dealing with this crap.
btw the ps4 is still shutting off almost immediately
Try a heat gun on the main board to re melt the solder on the main processor
@@stevencornish3188 can you please explain.?
Hey I ordered a hard drive and it’s been a week you know when it will come?
Its on its way and should be at your door in 2 days Diego.
Did you receive it?
Diego did you receive it and did it work?
@@fasttechvideo if I can order a hard drive through you, how much would it cost?
@@BootyThumbsLLc Please check this link: www.fasttech.ca/playstation-4-pro?category=Storage+Drives
Omg just bend the flex plate a little so it gets tighter. This is a old ps3 fix that dont work 70% of the time. ig you have a ylod problem the ps4 needs reballing it will just birk. I wood just change the termal paste maby bend the flex a little if you have it apart a few times before. Those spacers are a waist sorry but thats the facts.
I wonder how long this fix will last for?
We get almost no returns for our BLOD repair kit.
@@fasttechvideo Why would anyone return it and waste their time when you didnt fix it the first time around?
didnt work for me
Didnt work even when putting 2 😔
Probably the wrong spec washers but if they are the right one bought from our link you could have an issue with the APU chip itself or the motherboard.