My guy, too funny! “Thing I like bout super glue when it sticks too your fingers gives you something to do when fish ain’t bitin” hahah. Solid advice!🤙🏼
You sir are a legend. Your one of the greats that keep this sport moving forward. You have made it better for all of us . What's amazing is you didnt sell out to do it either. Thanks so much for all you do
GMan for the weed guard, you can use a piece of electrical heat shrink tubing It comes in a bunch of colors if you wanted to match the weed guard. All you need is a pocket touch lighter to shrink it down. You can even double up on it if you wanted to. I use it for my cheater hooks and when I run a blade on the back of my jigs.
Instant sub, as a jig fisherman I don't know why I haven't followed you before...funny and I learned something, my two favorite qualities in a RUclips video.
Enjoyed your video. I will definitely try setting up my jigs as you have demonstrated in this video. I Am brand spanking new to jig fishing. I am basically a finesse fishing when using plastic worms Texas Rig or wacky rig and Ned rig. Those are my confident go2faith. My new friend The Jig is very fastly becoming a new confident rig for me. I appreciate your down-to-earth attitude the end of Comedy you throw in from time to time. Keep them fishing.
Great stuff G.. I like using shrink tube myself. Get the shrink ratio of 2 to 1.. you can get the smaller sizes at your local auto parts and they come in many colors.. have a great season y'all. 🙏🙏🤙
Awesome tip!!… Thank You, Sir… Started fishing Arkie Jigs back in 70’s n forever been told to thin n trim weed guards… But I always figgered it was there to help so leave it there!!… Again, Thank You
I’ve been tying mine at the base similar to that to stiffen them a little. Also you can cut a few short and they help to make it stiffer when you tie it
Ive wondered if you and welcher ever been around ech other both you guys put out gr8 vids and alwsome vibes. I keeping a rubber band on my arm for a bit no etch and sketch on the boat as i dont have room lol.
I do basically the same thing when I make my jigs. Just with out the tubing. When I’m epoxying in the weed guard I dip it in about 1/2” into the epoxy and get off the excess and glue it in. It does basically the same thing by stiffening up the bottom of the weed guard. But this is a great idea for those “on the water fixes”. You’re the best G-Man! PMA all day!!!!
G I can't believe I'm saying this. I have used a coffee straw and covered the weed guard to make it stiffer for very heavy cover plus it also put the coffee sent in the water.
Thanks for the tip! I quit fishing for 20 years and came back to $20 lures. When I quit a titanium spinnerbait cost $7, now it's hard to find a spinnerbait for less! I came home after kayak fishing all day and told my wife, I felt like I was fishing in the right area, but afraid to lose a $20 lure. Any tip that I can use to have more confidence in putting a lure where it needs to be with a little more confidence that I will get it back is really helpful!
Hahaha damn GMAN you’re funny as hell and this is an awesome tip. Bet my check companies will come out with “weed guard stiffeners” here pretty soon. You need to latent this ASAP!!!
Awesome tip Gman! Love the content! Like someone else mentioned, I have used shrink tubing before when fishing offshore brush piles, but I’ll have to try this! Seems like it might last longer if I don’t glue my fingers to it lol
Thanks man your Secret is safe with me only problem is I don’t get on the water enough to hang my jigs LOL But that day is coming working man is got’a work , got’a feed those kiddos. You remind me of a framing fella l used to work for back in high school, straight to the point, fast talk’en southern man and you better be listening because he ain’t gon’a say it twice lol
Man I don't think there's a pro id rather spend a day in the boat with. Even if we weren't catchin em it would be a day to remember...lol. Thanks for the tip GMan
Nice trick dude that's pretty slick hope to see u on Saturday at the Harris Chain did you see Brian latimers trick he just put out put a t spot in your weight on your punching rig so the weight won't slide back down and knock your hook out of the fish
He is THE funniest pro fisherman to ever exist
Lmao. I’ll go with James “Worldwide” Watson.
No doubt.
Maybe...but A-Mart was pretty funny too. And Zona too.
My guy, too funny! “Thing I like bout super glue when it sticks too your fingers gives you something to do when fish ain’t bitin” hahah. Solid advice!🤙🏼
I could listen to Swindle talk all day lol. Dude's hilarious.
I concur
G done forgot more about fishing then I’ll ever know
Lmfao "Kyle Welcher!"
Now that’s funny !!!!
Gerald is the best impromptu guy around. That was hilarious.
Hes got me hooked deep boys. The G Man.
He said dont be you tubin my stuff or I'm going to be pissed . I Love It.
I just don't understand why more people don't follow you, great video GMan
When the G man is being so funny he chuckles at himself 😂😂😂 love ya man
What a real deal dude and pioneer/inventor...So innovative.
Well I’ll be dammed. I swear man G man be coming up with the greatest shit!
You sir are a legend. Your one of the greats that keep this sport moving forward. You have made it better for all of us . What's amazing is you didnt sell out to do it either.
Thanks so much for all you do
5 mins in the video and I subscribed. Dude is hilarious.
And this why he’s the OG 🤟🛎🛎🛎
GMan for the weed guard, you can use a piece of electrical heat shrink tubing
It comes in a bunch of colors if you wanted to match the weed guard. All you need is a pocket touch lighter to shrink it down. You can even double up on it if you wanted to. I use it for my cheater hooks and when I run a blade on the back of my jigs.
That girlfriend poke had me laughing 😂
Great tip, fishes jigs for years love that tip. Thanks G--Man
Instant sub, as a jig fisherman I don't know why I haven't followed you before...funny and I learned something, my two favorite qualities in a RUclips video.
I honestly had kind of lost the passion to fish, but seeing your tips and tricks truly inspires me to get back out there. 🎣💯
Boy he meant that "I'm gone be PISST" 🤣 Much love G.
G man always thinking about what he needs from a bait to make it work better !.And he delivers information in a funny way we all can relate with.
Ole Martin is pretty awesome, but you're up there too!! Thanks for the awesome tip 🤙. Congrats on the Century Club 👏
I mean hands down the king of lack line jig fishin awesome tip amazing knowledge
This would not be happening without your persistence Randy. Thank you so much❤
😂 who ?
You are the man! Pulling for you the win in 23
Must be nice to be a fisherman for a living, you deserve it G man
Oh man! So many ideas just ran through my head!
Here we go again! Thanks Kyle
KILLER if you aren't in deep crap you're not catching. Love it
you and richard gene the fishing machine are my favorite fishing channels!! Roll Tide from Decatur Al
And this is why I watch you GMAN!👍
You need to write a book,great simple tip! Thanks the JIG rules!!
Enjoyed your video. I will definitely try setting up my jigs as you have demonstrated in this video. I Am brand spanking new to jig fishing. I am basically a finesse fishing when using plastic worms Texas Rig or wacky rig and Ned rig. Those are my confident go2faith. My new friend The Jig is very fastly becoming a new confident rig for me. I appreciate your down-to-earth attitude the end of Comedy you throw in from time to time. Keep them fishing.
I don’t fish, and this video just popped up..... but I love this guy! Lol
Thanks, Gerald. I may not use it (I'm 71), but a kid I know will.
Great stuff G.. I like using shrink tube myself. Get the shrink ratio of 2 to 1.. you can get the smaller sizes at your local auto parts and they come in many colors.. have a great season y'all. 🙏🙏🤙
GMAN does NOT mess around with lubrication 👀 suckin on everything that moves😂😂
Mmmuuuhhhaaaa.........nailed it
Awesome tip!!… Thank You, Sir… Started fishing Arkie Jigs back in 70’s n forever been told to thin n trim weed guards… But I always figgered it was there to help so leave it there!!… Again, Thank You
I just started really learning the jig and this was gold! You are def one of my favorite anglers!
“Youscrewb” a damned poet right there son
GERALD YOU ARE SUCH A HOOT I COULD LISTEN TO YOU ALL DAY YOUVE GOT TO DO MORE OF THIS FOR RUclips
Great jig video G-Man. Shawn.
Awesome Tip GMan 💥🇺🇸 Thanks buddy 👍
Thanks, I'm one of those anglers who hesitates throwing a jig in heavy wood cover. Your tip gives me a new perspective on how to be more successful.
Love the guy already. I just subscribed 5 mins ago.
Supremely entertaining and ultra informative... thank you GMAN
Don't be scared loved it
I’ve been tying mine at the base similar to that to stiffen them a little. Also you can cut a few short and they help to make it stiffer when you tie it
Great idea Gman!... amazing how simple physics can make a difference huh?... just takes someone like you to figure it out and put it to use!
Don't be confusing him with the word (physics)!
Get this man an award!
This is absolutely great! Thanks G!
Welcher is still looking for his GoPro. Lol
Ive wondered if you and welcher ever been around ech other both you guys put out gr8 vids and alwsome vibes. I keeping a rubber band on my arm for a bit no etch and sketch on the boat as i dont have room lol.
Salute to YOU O.G. 🫡 appreciate that
I like this idea better, we always been putting lite fishing line around the top and tying it tight., thanks Gman
I do basically the same thing when I make my jigs. Just with out the tubing. When I’m epoxying in the weed guard I dip it in about 1/2” into the epoxy and get off the excess and glue it in. It does basically the same thing by stiffening up the bottom of the weed guard. But this is a great idea for those “on the water fixes”. You’re the best G-Man! PMA all day!!!!
Dude, you crack me up! LOL! Great tip, thanks or sharing!
Well done GMAN, well done.
Monster tip....I'm on it. Thank You
Awesome..Great Intel..Owe yah G..
Excellent video thanks for your advice and guidance please do a video on spinnerbaits
G I can't believe I'm saying this. I have used a coffee straw and covered the weed guard to make it stiffer for very heavy cover plus it also put the coffee sent in the water.
You are definitely the G Man!!!👍🏼👍🏼
Thanks for the tip! I quit fishing for 20 years and came back to $20 lures. When I quit a titanium spinnerbait cost $7, now it's hard to find a spinnerbait for less! I came home after kayak fishing all day and told my wife, I felt like I was fishing in the right area, but afraid to lose a $20 lure. Any tip that I can use to have more confidence in putting a lure where it needs to be with a little more confidence that I will get it back is really helpful!
Thanks. Confidence in the tactics is everything
Great tip brother !
Hahaha damn GMAN you’re funny as hell and this is an awesome tip. Bet my check companies will come out with “weed guard stiffeners” here pretty soon. You need to latent this ASAP!!!
I love this man!
Gman, thank you for the great tips and mostly for keeping it real!
Love the way you articulate..well said.
Awesome tip Gman! Love the content! Like someone else mentioned, I have used shrink tubing before when fishing offshore brush piles, but I’ll have to try this! Seems like it might last longer if I don’t glue my fingers to it lol
Dude.......great hack..... to fish with the G man would be my at the top of my bucket list
G-Man !!!! You da man !!! I promise I won't tell anymore except my buddy.
As always informative and hilarious, Thanks G!
🤯🤯🤯
New to the channel, wish I’d of gotten here sooner. Enjoying the content. So much to catch up on. Thanks for the video sir 🍻
Did this years ago with a piece of self adhesive shrink tube. Works!
Ya know what imma do when I get home 😂😂😂 Thanks G 👊👊👊
Thank you! These southern bass fishing tips and tricks kill it in the northern waters.
Gerald, you are a gentleman even though you like to pretend like you’re not!😄
Hey G MAN, looks like this may work every time sometimes. Brilliant!!!!! Thanks!!
Gman thanks for the advice, good luck in 2021👍🏻
G-Man lettin it all out, who would have thought, thanks !!!
Good idea G-man. I'll give you credit
Awesome tip.
Swindle is the man. Can learn a lot from him.
Great stuff. Don’t fret none I aint telling no one
Awesome information
Shrink tubing works too. Careful when shrinking obviously. A necessary hack for flipping reeds in FL 👍
Thanks for the tip. In a pinch I’m thinking rubberband may work. Will give this a try.
Thanks man your Secret is safe with me only problem is I don’t get on the water enough to hang my jigs LOL But that day is coming working man is got’a work , got’a feed those kiddos. You remind me of a framing fella l used to work for back in high school, straight to the point, fast talk’en southern man and you better be listening because he ain’t gon’a say it twice lol
That super glue on your fingers gives something for them dude wipes to get off! Shrink tubing works too!
Only an Asian would be smart enough to think of that 😁
Naw naw naw.
I love your videos bubba, they get me rolling everytime.
Awesome idea !! Thanks
Good stuff, brother. Appreciate you for giving this advice.
G! Always freaking awesome! Come on!
Thanks for the tip G
Dang that's some fine engineering. all great things come from necessity
Great tip g man. I’ll be doing this for sure. I won’t tell all those tree and structure down below the water the trick.
Man I don't think there's a pro id rather spend a day in the boat with. Even if we weren't catchin em it would be a day to remember...lol. Thanks for the tip GMan
Getald is a super funny southern fisherman lol
Nice trick dude that's pretty slick hope to see u on Saturday at the Harris Chain did you see Brian latimers trick he just put out put a t spot in your weight on your punching rig so the weight won't slide back down and knock your hook out of the fish
GMAN you ain't nuthin but the truth son , we love ya , and pray for y'all, keep on keeping on