I've owned a 93 FZR600 for 25 years now, was my first bike. The front suspension was too soft from the factory. I stopped riding for many years after almost crashing at a high speed when I hit the front brakes trying to avoid an animal and the handle bars literally pulled right out of my hands. A few years back I took the time to replace the springs in the forks with higher rate springs and slightly thicker oil. Still on original clutch and brakes. Its been a good bike.
Had a 94 brand new back in the day. Those stupid fork seals failed in the first year. As I recall I put in progressive springs and new fork seals and it made it much better.
Probably just need carburetor cleaning and idle adjust. Hope you can find foot peg and front fairing. It's a nice looking bike for the age. Love the FZR's.
Ironically the carbs were rebuilt and tuned. It was running fine for the week leading up to the review then by the end of filming things just started coming up. Honestly I had a blast riding it but the previous owner before my friend kinda beat it up into the state it’s in now.
I have the identical year fzr600, identical look. Also took off the side fairings cause it's my first bike and kept laying the thing over. It still runs great at 29k miles. I swapped the fork springs for stiffer race techs, replaced with a busa rear shock. Rebuilt the carbs with factory pro emulsion tubes, and a dynojet kit. I will say sometimes parts are hard to find. That fairing stay for the front is practically impossible to find for a reasonable price. $400-$600 at least. The rear tire is a 18inch, you can't really find tires that size. The fzr communities when they were still active suggest swapping the rear with a 17inch gsxr rim. You get some higher take off speeds with the smaller rim. The petcock, there are rebuild kits, and you'll have to do some light sanding on the valve disc to get it flat again. Keep an eye on the gas tank, old bikes, the liner goes out, had to remove surface rust, and reline mine. I do have all the fairings, I dream of a future where I'll do some fiberglass work, and make replacements, but still trying to weigh in whether it's worth the time.
I have that exact bike and love it. If they are taken care of they are very dependable bikes. The bike was originally made for the track so yes they want you to have boots on. The cluster should all light up and parts are very easy to find for this bike. If tuned right you can get 108 hp out of it.
98 hp from factory with a bhp of 78 if performance mods like stage 1&3 jets with a stage 2 clutch can achieve 108 without dyno tune. Ive seen as high as 126
Still great bike love mine. But now days the 600 class is putting out more from stock. But they still cant handle like the fzr in corners and that is where real races are won
In Holland i have a FZR600 R different model( same model as the 750 ) with 160 backweel 120 front 101 hp for 12 years now ,trusted bike : very nice video 👍gr.
That’s what I was getting at later is that it’s not bad but it needs work. Most fzr 600s I see need some tlc. Due to their low value not many people bother fixing them.
Ive owned a few different bikes all 500cc. A buddy of mine has 1997 Yamaha fzr600 for sale I'm thinking about getting it smart move or should I look for something else? I'm a decent rider been riding for four years now just have never rode anything over 500cc. What can I really expect outta this bike?
I mean I can't give too much input as this one was a mess. I think thats a fine bike to jump to if you have been riding that long on that size cc. Shows you learned how to ride before hopping on something crazy. My concern is depending where you're located country wise this bike may easier to find stuff for. In the US it's harder to hunt down parts due to its age. Also I'm not sure if you wish to deal with carburetors. If those 2 things don't bother you I think its not a bad deal to grab one. Just be mindful it may be an older 600 but it's still a fast bike. Be careful and have fun.
@@freedommotoproject6110 I'm in Michigan in the US and oh yeah I started off on a 250 and worked my way due to comfortably I got to 500cc and was happy with it but I want something more but I'm not sure if it is going to be to much bike for me not. I guess a test ride is in order
@@freedommotoproject6110 have a full parts bike hasnt ran since 1999 it's a 1996 fzr600r it's been kept inside since the last owner went to the army and never came back the family 4got about untill it got knocked over its missing the belly and tank plastics but I'm sure it will run
man you really need to improve the reviews, it was better if you havent done this fzr review, 90% of the "need to get used to" its youre bike problem , i have a 1989 fzr 600 and i dont have to get used to any thingh you mensioned , that bike got many things broken, missing and in bad shape. it looks like youre speaking generaly when its not the case.
I appreciate the feedback. Everything you have said has been mentioned before though. I know I was focused on this bike a bit too much. Currently (not sure if you have noticed the dates on the videos) the channel has been put on hold due to things going on in my personal life. As much crap as I said about it I do actually love this bike and have many times thought about buying from the owner to fix it up to its former glory as it is not my motorcycle. So again thanks for the feedback and sorry my videos aren't really that great
Авто/Мото
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
I've owned a 93 FZR600 for 25 years now, was my first bike. The front suspension was too soft from the factory. I stopped riding for many years after almost crashing at a high speed when I hit the front brakes trying to avoid an animal and the handle bars literally pulled right out of my hands. A few years back I took the time to replace the springs in the forks with higher rate springs and slightly thicker oil. Still on original clutch and brakes. Its been a good bike.
Had a 94 brand new back in the day. Those stupid fork seals failed in the first year. As I recall I put in progressive springs and new fork seals and it made it much better.
I dumped my 96 twice and then stopped riding it. I'm selling it now. It looks like the value went up quite a bit
I have a 96FZr 600 original owner never laid down. Great bike still looks new always garage kept.
Probably just need carburetor cleaning and idle adjust. Hope you can find foot peg and front fairing. It's a nice looking bike for the age. Love the FZR's.
Ironically the carbs were rebuilt and tuned. It was running fine for the week leading up to the review then by the end of filming things just started coming up. Honestly I had a blast riding it but the previous owner before my friend kinda beat it up into the state it’s in now.
when they were built to last
I have the identical year fzr600, identical look. Also took off the side fairings cause it's my first bike and kept laying the thing over. It still runs great at 29k miles. I swapped the fork springs for stiffer race techs, replaced with a busa rear shock. Rebuilt the carbs with factory pro emulsion tubes, and a dynojet kit. I will say sometimes parts are hard to find. That fairing stay for the front is practically impossible to find for a reasonable price. $400-$600 at least. The rear tire is a 18inch, you can't really find tires that size. The fzr communities when they were still active suggest swapping the rear with a 17inch gsxr rim. You get some higher take off speeds with the smaller rim. The petcock, there are rebuild kits, and you'll have to do some light sanding on the valve disc to get it flat again. Keep an eye on the gas tank, old bikes, the liner goes out, had to remove surface rust, and reline mine. I do have all the fairings, I dream of a future where I'll do some fiberglass work, and make replacements, but still trying to weigh in whether it's worth the time.
I have that exact bike and love it. If they are taken care of they are very dependable bikes. The bike was originally made for the track so yes they want you to have boots on. The cluster should all light up and parts are very easy to find for this bike. If tuned right you can get 108 hp out of it.
wayne oliver I thought they had about 100hp from the factory
98 hp from factory with a bhp of 78 if performance mods like stage 1&3 jets with a stage 2 clutch can achieve 108 without dyno tune. Ive seen as high as 126
Still great bike love mine. But now days the 600 class is putting out more from stock. But they still cant handle like the fzr in corners and that is where real races are won
wayne do you have some vibration around the 3500 rpm mark?
@@ikilforkut no vibration just dont like to maintain low speeds.
In Holland i have a FZR600 R different model( same model as the 750 ) with 160 backweel 120 front 101 hp for 12 years now ,trusted bike : very nice video 👍gr.
Yooo I have a 96 fzr 600 two! One of my favorite bikes
This is my first bike I ever owned lol love hate relationship with her
DAMN ! this bike looks amazing naked ! ! !
badass Bike Gotta love a Older Sports Bike
Why cant i find any info on fz6s before 1998??
should rename it the "jenky FZR reveiw" because a lot of the problems youre mentioning are just things that are broken.
Tim Edwards maybe lol
That’s what I was getting at later is that it’s not bad but it needs work. Most fzr 600s I see need some tlc. Due to their low value not many people bother fixing them.
Freedom Moto Project yeah still it runs lol 😂 I just got one for 200$
I got 2 of these suckers
Ive owned a few different bikes all 500cc. A buddy of mine has 1997 Yamaha fzr600 for sale I'm thinking about getting it smart move or should I look for something else? I'm a decent rider been riding for four years now just have never rode anything over 500cc. What can I really expect outta this bike?
I mean I can't give too much input as this one was a mess. I think thats a fine bike to jump to if you have been riding that long on that size cc. Shows you learned how to ride before hopping on something crazy.
My concern is depending where you're located country wise this bike may easier to find stuff for. In the US it's harder to hunt down parts due to its age. Also I'm not sure if you wish to deal with carburetors. If those 2 things don't bother you I think its not a bad deal to grab one. Just be mindful it may be an older 600 but it's still a fast bike. Be careful and have fun.
@@freedommotoproject6110 I'm in Michigan in the US and oh yeah I started off on a 250 and worked my way due to comfortably I got to 500cc and was happy with it but I want something more but I'm not sure if it is going to be to much bike for me not. I guess a test ride is in order
Make it into a nice naked bike . It looks sweet with the fairings off
Can you wheelie that thing yet or what?
Improper Philosopher I’m pretty sure the previous owner stunting it is why half the problems it has are a thing
I got ah 93 FZR600 myself
It’s a nice bike and a lot of fun.
Freedom Moto Project gotta love your Yamahas ❤️💯
I have the front piece he needs for the mirror
I had mentioned it to the owner and he said he needs to focus on getting it fixed as it pretty much sat since this video got posted.
@@freedommotoproject6110 have a full parts bike hasnt ran since 1999 it's a 1996 fzr600r it's been kept inside since the last owner went to the army and never came back the family 4got about untill it got knocked over its missing the belly and tank plastics but I'm sure it will run
@@freedommotoproject6110 kyraknight1988@gmail.com
Will your local Yamaha dealer do tune-ups & repairs to a bike that old?
Your brakes need maintenance. The pistons are probably sticking . That’s not how the brakes really feel
i dont approve of you not paying attention to shifting gears
holding clutch too long when you blip throttle...
Good video but stop tuting
You can up shift with out yhe clutch you know
Smh.... dont do that
This is why you cant buy used bikes from peopl
man you really need to improve the reviews, it was better if you havent done this fzr review, 90% of the "need to get used to" its youre bike problem , i have a 1989 fzr 600 and i dont have to get used to any thingh you mensioned , that bike got many things broken, missing and in bad shape. it looks like youre speaking generaly when its not the case.
I appreciate the feedback. Everything you have said has been mentioned before though. I know I was focused on this bike a bit too much. Currently (not sure if you have noticed the dates on the videos) the channel has been put on hold due to things going on in my personal life. As much crap as I said about it I do actually love this bike and have many times thought about buying from the owner to fix it up to its former glory as it is not my motorcycle. So again thanks for the feedback and sorry my videos aren't really that great
awesome bike I had a 88 Suzuki gsxr600 currently have a 82 KZ750 LTD