Try the following: Check VirtualBox Settings: Open your VirtualBox settings for the macOS virtual machine. Go to the System section. Under the Motherboard tab, ensure that the EFI option is enabled. Save the settings and try booting the VM again. Create a Startup.nsh File: If the issue persists, you can create a startup.nsh file within the EFI shell to manually load the bootloader. Follow these steps: When you see the EFI shell prompt, type exit and press Enter. You’ll enter an EFI text-mode GUI. Select Boot Maintenance Manager and click. Choose Boot From File and click. You’ll see a list of entries (PCI bus paths). Look for the bootloader (usually named boot.efi). Load the bootloader by navigating to its location and executing it. Additional Tips: Sometimes, changing the chipset to PIIX3 might help. Try booting with this setting. If you encounter a message that the platform is not supported, consider using a lower version of macOS that is compatible with your hardware. AMD Processors: Note that running macOS guests on non-Apple hardware with AMD processors can be challenging due to compatibility issues. Some sources suggest adding the following command to your VM configuration: VBoxManage modifyvm "mac" --cpu-profile "Intel Core i7-6700K" Replace "mac" with your virtual machine name. Remember that macOS virtualization on non-Apple hardware can be tricky, and results may vary. If you continue to face issues, consider exploring alternative methods or seeking specialized forums for further assistance.
The ISO file is corrupted, try downloading it from the link in the video description or a trusted source. If you have downloaded it from the link here, try downloading it again because the download most probably corrupted
before this here it worked but then it paused in boot...and now nothing works 💀💀💀💀💀💀💀💀💀💀
try reisntalling the machine and make sure to keep everything updated
@@EpidemicTutorials-qh6de ok...
it gave me this "bdsdxe failed to load boot0001 uefi vbox cd-rom vb1-1a2b3c4d"
Try the following:
Check VirtualBox Settings:
Open your VirtualBox settings for the macOS virtual machine.
Go to the System section.
Under the Motherboard tab, ensure that the EFI option is enabled.
Save the settings and try booting the VM again.
Create a Startup.nsh File:
If the issue persists, you can create a startup.nsh file within the EFI shell to manually load the bootloader.
Follow these steps:
When you see the EFI shell prompt, type exit and press Enter.
You’ll enter an EFI text-mode GUI.
Select Boot Maintenance Manager and click.
Choose Boot From File and click.
You’ll see a list of entries (PCI bus paths). Look for the bootloader (usually named boot.efi).
Load the bootloader by navigating to its location and executing it.
Additional Tips:
Sometimes, changing the chipset to PIIX3 might help. Try booting with this setting.
If you encounter a message that the platform is not supported, consider using a lower version of macOS that is compatible with your hardware.
AMD Processors:
Note that running macOS guests on non-Apple hardware with AMD processors can be challenging due to compatibility issues.
Some sources suggest adding the following command to your VM configuration:
VBoxManage modifyvm "mac" --cpu-profile "Intel Core i7-6700K"
Replace "mac" with your virtual machine name.
Remember that macOS virtualization on non-Apple hardware can be tricky, and results may vary. If you continue to face issues, consider exploring alternative methods or seeking specialized forums for further assistance.
How to increase screen resolution for this virtual machine and also how to install the drivers of this virtual machine
Thanks for the video, but I get the error "No bootable option or device was found". Any ideas?
ISO is corrupted, download it using the link provided or another trusted source
The virtual machine failed to boot. That might be caused by a missing operating system or misconfigured boot order.
The ISO file is corrupted, try downloading it from the link in the video description or a trusted source. If you have downloaded it from the link here, try downloading it again because the download most probably corrupted
@@EpidemicTutorials-qh6de download was from the link but I'll try again :)
Thanks!
ERROR : Failed to query SMC value from the host (VERR_INVALID_HANDLE).
Check video description you will find the solution there
my problem repeats instaLL Pross over &over never get that part did every step right ADM Ryzen 3
Check video description
hey bro, when it's loading it stop at this : # [EBIFWFM] 0x00000000800003FF, so how do I fix it, or just that's normal
No Idea, try reinstalling it
@@EpidemicTutorials-qh6de I've tried several times but the same error, and even I change the iso files from different resources
exitbs:start1 i get this error no matter what tried your troubleshoots in description too
Make sure to update all elements and try again
hey bro, my vm gets stuck in the loading bar and it never gets past like 40%. ive checked everything but nothing works. any idea?
That might be due to slow device performance. Do you have an SSD or HDD? CPU? RAM?
where is the Big Sur.iso file after extracting the folder?
I downloaded .iso from InternetArchive. It worked.
in the extracted folder?
Hi could you help me out please it says i have no bootable device
ISO is corrupted, download it using the link provided or another trusted source
@@EpidemicTutorials-qh6de i have the same issue i down load from your link
Virtualbox freezes at logo after some installation foran hour z reply
it might take very long time depending on your host device, make sure to follow the tutorial correctly if the issue persist let me know
Sonoma don"t working. Boot Loop
ruclips.net/video/-Wx5Wdb-Fic/видео.html
It's not working
iso not working, error: mount valid iso
Make sure u mounted the right iso file
@@EpidemicTutorials-qh6de I fixed it but now I get only 7mb of VRAM even if I setted it at 256
Intallation error after this message: AppleVTD is not yet installed as gSystem. RTC: only single RAM bank
Try updating Virtualbox and its extension pack
when trying to signin apple account i get ICLOUD_UNSUPPORTED_DEVICE. Anyway to fix that?
No Not at the moment but we are trying to find a way to add an Icloud on VM
Having issues with the installation
please, share any specific issue or error codes
Could you provide another trusted source please
I have already provided one in the Video description
@@EpidemicTutorials-qh6de This link is corrupted
Linux?
This tutorial is for windows
My boot is stuck at "[EB|LOG:EXITBS:START] followed by timecode"
is this expected and the first boot just takes a while or is this an real error?
Was it successfully installed?