There should be a class action lawsuit over this design. A super thin plastic axle that is subjected to bending stress every time you 'click' the wheel. This was a deliberate decision to skip maybe one manufacturing step and sell more remotes on the back end.
My dad spent way too much money on this tv and they emphasized it was because of the remote...I haven't told him my kids over clicked the wheel in the past year or so and hints why I'm here before he flips out 😬. Just looked up a replacement one and it's anywhere between $30-$50 😮💨. Since my kids did the damage I'm trying to do my part by fixing it, but man this looks complicated I may just have to pay up 😅.
For those wondering how to pry open the case (since it’s not shown in the video), I found a plastic card (like a credit card) works nicely, although it ruins the card a bit, so perhaps pick one you don’t care much about (membership card to something).
I watched your video a year ago when our remote of about 3 years old broke but we decided to order a new one than do this. There is one one place we found selling official LG remotes and it wasnt an LG site? I find that odd. So here we are with a broken wheel again! We do have different gage wires but may be same issue with being too thin to stay inside the wheel. But knowing what it needs is the key! Thanks so much! In reality they dont need to make the wheel "click". That should be a separate button but in reality the only ENTER function is clicking a wheel that HAS to spin. But the entire thing could be changed the arrows around the circle have same function as the spinning wheel. And up and down arrows. So two choices on that! The middle could just be a clicker only. And the red arrow is also a pointer. The only thing that counts is the one thing that breaks. Enter! It also doesnt have to simulate a mouse for computer. They need to keep it simple. And will be writing to them!
Thank you very much Mr Alam. It was very helpful to fixed my LG signature magic remote control MODEL: AN-MR700. My remote wheel's left tiny part was broke not the click part like you. I couldn't scroll it. I have used same toothpick method and it's working just fine. Thank you again. It's looks you are Desi and lives in England but not sure country of origin. I am Bangladeshi Bengali. আপনাকে আবারো অসংখ্য ধন্যবাদ এবং কৃতজ্ঞতা।
Thank you very much! I had one that just quit electronically. I was sent a replacement and bazar misfortune spilt liter fluid on it and the witch fused the 4 way button. Following your lead I was able to open that clam shell and swop the faces out. Walla back in business.
I was about to order a new one untill I stumbled on this vid. So having nothing to lose, I tried it: Worked like a charm. My toothpick didnt fit, zo I had to make it smaller by "splitting" it into smaller parts. Perfect, thanks!
Thanks,I had to do mines differently because the other part broke off to connect but Im goad you showed me its easy to open the Controller and make adjustments
I wish I could find your video before I place an order for another remote I have the same issue with the current one but a few hours ago I did ordered a new remote I will bear it in mind if the same issue occur with the next one
My wheel was not clucking easily. Pivot in wheel was broken. I managed to completely destroy the remote cosmetically and functionally while trying to fix it and I'm an engineer. Putting the unit together was the tricky part. Wish I had not tried at all. Beware!!!
For me, the other ‘axle’ of the wheel- the one that goes inside the switch was broken. So I did this : - Picked out the broken part of the ‘axle’ from the switch using a sharp pointed pick. - put the wheel on a vice so it remains upright. - little bit filing on the wheel where the axle connects to make a smooth joint. - Using a magnifying glass as a aid, i put a very tiny amount of super glue on the wheel. - using tweezers, i gently placed the broken axle on the wheel, just making it sit, without any force. then let it dry. - mixed up some 2 part epoxy and using a toothpic, I applied to the joint. Let it dry for 12 hours and put everything back. Voila ! Now thinking about my steps, I think I should have made a separate video out of it.
I have the same issue. Plastic sheered in two flush with the wheel. There seems to be a metal sleeve holding a piece of plastic.. Not sure if that has some solder points on it - part of electronic contacts or something. The sleeve has a hole where I think the broken off part would have attached flush to where the wheel has sheered off. Luckily I have an IFixit PC repair kit and some plastic pieces that look like guitar plectrums were helpful in prying the case apart without any outward appearance of damage. Four wafer thin pieces of plastic seem to shear off (2 on each side) where the top/bottom clipped together (just around the bottom of the joystick whee; section and between the +/- volume. If you pry the top from the bottom of the case carefully all the rubber buttons stay in the top making life easier. It's just the little rubber wheel that comes out. Gonna ponder how to fix it and contact LG after the weekend perhaps. Get their advice. They should perhaps make the axle out of a piece of metal instead of plastic so it doesn't give out so easily.
@@jeremyflowers8908 Indeed. It’s a poor design. Imagine the pressure a human puts using their thumb on the wheel. That whole pressure rests on a plastic “shaft” that is 1 mm thick. It’s gonna break at some point. Luckily for me the epoxy is holding out well. But subconsciously we are more careful when using the wheel now. A metal shaft is definitely a better Upgrade. I hope someone sells it as a aftermarket part upgrade.
Hola kham alam saludo. Interesante el video como se la ingenia usted. Bueno el problema de mi control es igual a ese pero el que se quebro fue el eje delgado lado contrario. En ese caso tendre que comprar esa pieza o un nuevo cintrol. En espera de su opinion o sugerencia gracias.
Hey I dropped my AN-MR600 remote and it seems like one integrated circuit broke off. It's near the ir led and has the label U3. It's an 4 or 5 pins IC. Does any one know the part no?
I havent tried fixing ours yet but if you need a small pry to open it try glasses screw drivers or sewing machine accesories. I have many vintage machines so many small tools. Even those old keys to open cans they have a skinny pry end. Once you get it open a bit on one side run a dime or something around it. Ive done this on lots of tiny hard to open doors etc. on kids toys, machine parts, even the dang metal key rings that break your nails. Start skinny and work your way around with thicker items.
i wonder how he managed to brake the klicker! normally the other side breaks, just like mine. that little 6 sided pin who goes in the scroller is just so tiny it has to break one day. thats a mayor design flaw by lg. i repaired mine but its very hard to scroll and press the button.
@@aytacbayram210 yeah your right man. obsolet after a month of use. i tried a cx remote on my e9 so i don't have to buy a new one. but it doesn't work at all. so i fixed mine again. i just hope the new c1/g1...remotes are better and more reliable than the old ones.
Hey dude, can a help me ? I've a smart magic remote control (mod. AN-MR19BA), but now, the light's on-off always stay on. I don't know Why ... i changed the battery, open the inside but don't see nothing error. Do you saw the error or know is happen ? Thks
Had mine just over a year and it broke.Ironically it sat boxed in my house while I waited for an electrician to fit it on the wall with a bracket. So used less than a year in reality. Seems like a common design flaw.
Pull the tiny broken piece of axle from the housing. Put a tiny bit of super glue on the tip and sit it onto the wheel. Wait to dry and put back together.
Год назад
Thanks. Now I can stick some tape under the stupid Netflix and movies buttons I keep pressing accidentally 😂
Hi. The problem in mine is the red button for on-off function. Is not responding and I need to connect/disconnect tv manually. Do you know how can I fix it? Thanks
When i'm trying to give my tv voice order's . the tv gave me msg , you must go to wifi Connection first , is that normal to give an voice commands , should i turn the wifi connection on first before i give my lg tv an voice command's ?? is that normal or that is such a problem in my tv setting even in software or hardware ??
My issue is not the wheels, Is the click in select action that is malfunction. It doesn't bounce back. Not the black rolling part but is the clicking button on board. Do I have to get a complete remote. Anyone knows how to fix. Please share will be appreciated.
Lol I'm having the same issue.....Have u called lg for the warranty, I'm gonna call them tomorrow, my tv is 5 months old my remote shouldn't break. If they say no I'm gonna buy a new one, amazon has it for $20.
Update: I opened mine and lg made it to be cheaply broken so they can sell u more remote. The plastic that hold the wheel is weak and skinny it's meant to brake with each press (the more you use it). And also i've watch 3 different repair videos and they all have different wheel model that holds the wheel up. the newest model is the weakest one (which I have). I'll try to super glue it but than again it's meant to be broken so it's whatever.
@@MrPierre8081 I got an LG oled c9. I called them and they gave me a freeeeee remote lol. I bought the tv 9 months ago so I asked if the warranty covers the remote control. At first She thought I was talking about the tv and said "yesssss, what's wrong with the tv. Tv doesn't read the remote" I was like: no, the tv works perfectly. She was like ohhhh ok I'll send u a remote than.
That button won't last long this way, this remote is costly but you don't need to buy the same remote again, simple remotes are also available in the market @ Rs 150/- only
There should be a class action lawsuit over this design. A super thin plastic axle that is subjected to bending stress every time you 'click' the wheel. This was a deliberate decision to skip maybe one manufacturing step and sell more remotes on the back end.
My dad spent way too much money on this tv and they emphasized it was because of the remote...I haven't told him my kids over clicked the wheel in the past year or so and hints why I'm here before he flips out 😬. Just looked up a replacement one and it's anywhere between $30-$50 😮💨. Since my kids did the damage I'm trying to do my part by fixing it, but man this looks complicated I may just have to pay up 😅.
You don't need to buy the same remote again, simple remotes are also available in the market @ Rs 150/- only
@@harshalmahajan5986 if it was mine I wouldn't buy the same remote. Unfortunately my father is the picky one 😮💨
Every years mine breaks 😂
You saved me from buying a new remote, the scroller was not working for 2 years n I decided to check how I can fix it.. thank you 😊
See the video care fully scroller has two sided small stick in your one stick might broken
My wheel is clicking but when I push it in to select it doesn't work but all other remote options work? Any suggestions
For those wondering how to pry open the case (since it’s not shown in the video), I found a plastic card (like a credit card) works nicely, although it ruins the card a bit, so perhaps pick one you don’t care much about (membership card to something).
I watched your video a year ago when our remote of about 3 years old broke but we decided to order a new one than do this. There is one one place we found selling official LG remotes and it wasnt an LG site? I find that odd. So here we are with a broken wheel again! We do have different gage wires but may be same issue with being too thin to stay inside the wheel. But knowing what it needs is the key! Thanks so much! In reality they dont need to make the wheel "click". That should be a separate button but in reality the only ENTER function is clicking a wheel that HAS to spin. But the entire thing could be changed the arrows around the circle have same function as the spinning wheel. And up and down arrows. So two choices on that! The middle could just be a clicker only. And the red arrow is also a pointer. The only thing that counts is the one thing that breaks. Enter! It also doesnt have to simulate a mouse for computer. They need to keep it simple. And will be writing to them!
Thank you very much, Your video gave me the confidence to open the remote and fix it myself even when my issue was little bit different
Thank you very much Mr Alam. It was very helpful to fixed my LG signature magic remote control MODEL: AN-MR700. My remote wheel's left tiny part was broke not the click part like you. I couldn't scroll it. I have used same toothpick method and it's working just fine. Thank you again.
It's looks you are Desi and lives in England but not sure country of origin. I am Bangladeshi Bengali. আপনাকে আবারো অসংখ্য ধন্যবাদ এবং কৃতজ্ঞতা।
আপনাকে অনেক ধন্যবাদ আমার ভিডিও দেখার জন্য হ্যাঁ আমি বাংলাদেশী
Thank you very much! I had one that just quit electronically. I was sent a replacement and bazar misfortune spilt liter fluid on it and the witch fused the 4 way button. Following your lead I was able to open that clam shell and swop the faces out. Walla back in business.
I was about to order a new one untill I stumbled on this vid. So having nothing to lose, I tried it: Worked like a charm. My toothpick didnt fit, zo I had to make it smaller by "splitting" it into smaller parts. Perfect, thanks!
I fixed my scroller thanks for making this video
Thank you for sharing this. Very helpful to me
This remote is so bad in quality... how can they give a plastic garbage like this for oled models?
Amazing. Thank you!
You saved my life and my money.😊 god bless you sir🌹
Bit dramatic
Well done! I followed your video and the remote is repaired! Thnx.
I broke the other side so it more difficult for me but you help me to understand the problem..
Thanks a lot brother ... from India.
Thanks,I had to do mines differently because the other part broke off to connect but Im goad you showed me its easy to open the Controller and make adjustments
I just happen to find this fix my clicker just spins. Appreciate and will update 👍🏼👍🏼
My button clicks and I took it apart and nothing broken! It just seems to be the only thing on the remote not working 😕
Thank you sir.... I've loosing my mind got sick of this scroller wheel in 1 month...
Good video. I'm going to fix it.
iam facing exact problem, thanks alot
This is really work it thank you....☺
Tysm u saved my life
I wish I could find your video before I place an order for another remote I have the same issue with the current one but a few hours ago I did ordered a new remote I will bear it in mind if the same issue occur with the next one
Great Alam vhi. Well done. ধন্যবাদ, সালাম।
perfect, thank you very much
Nice video...its working...Thank U ao much..
My wheel was not clucking easily. Pivot in wheel was broken. I managed to completely destroy the remote cosmetically and functionally while trying to fix it and I'm an engineer. Putting the unit together was the tricky part. Wish I had not tried at all. Beware!!!
How to open that case? What tools do you used
For me, the other ‘axle’ of the wheel- the one that goes inside the switch was broken.
So I did this :
- Picked out the broken part of the ‘axle’ from the switch using a sharp pointed pick.
- put the wheel on a vice so it remains upright.
- little bit filing on the wheel where the axle connects to make a smooth joint.
- Using a magnifying glass as a aid, i put a very tiny amount of super glue on the wheel.
- using tweezers, i gently placed the broken axle on the wheel, just making it sit, without any force. then let it dry.
- mixed up some 2 part epoxy and using a toothpic, I applied to the joint.
Let it dry for 12 hours and put everything back. Voila !
Now thinking about my steps, I think I should have made a separate video out of it.
I have the same issue. Plastic sheered in two flush with the wheel. There seems to be a metal sleeve holding a piece of plastic.. Not sure if that has some solder points on it - part of electronic contacts or something. The sleeve has a hole where I think the broken off part would have attached flush to where the wheel has sheered off. Luckily I have an IFixit PC repair kit and some plastic pieces that look like guitar plectrums were helpful in prying the case apart without any outward appearance of damage. Four wafer thin pieces of plastic seem to shear off (2 on each side) where the top/bottom clipped together (just around the bottom of the joystick whee; section and between the +/- volume. If you pry the top from the bottom of the case carefully all the rubber buttons stay in the top making life easier. It's just the little rubber wheel that comes out. Gonna ponder how to fix it and contact LG after the weekend perhaps. Get their advice. They should perhaps make the axle out of a piece of metal instead of plastic so it doesn't give out so easily.
@@jeremyflowers8908 Indeed. It’s a poor design. Imagine the pressure a human puts using their thumb on the wheel. That whole pressure rests on a plastic “shaft” that is 1 mm thick. It’s gonna break at some point. Luckily for me the epoxy is holding out well. But subconsciously we are more careful when using the wheel now. A metal shaft is definitely a better Upgrade. I hope someone sells it as a aftermarket part upgrade.
Same problem, im gonna tr your solution. I wish you did make the video haha!
Same problem, im gonna tr your solution. I wish you did make the video haha!
Thank you!!!!
hello i have a control model mr20ga it broke the mic, can you tell me the mic model to do the replacement?
Thank you
Hola kham alam saludo. Interesante el video como se la ingenia usted. Bueno el problema de mi control es igual a ese pero el que se quebro fue el eje delgado lado contrario. En ese caso tendre que comprar esa pieza o un nuevo cintrol. En espera de su opinion o sugerencia gracias.
Ponle una llave allen !
Hey I dropped my AN-MR600 remote and it seems like one integrated circuit broke off. It's near the ir led and has the label U3. It's an 4 or 5 pins IC. Does any one know the part no?
will the mouse cursor start working after this fix?
Nice fix!! Hey, do you know how to fix the OK button on electronic board? Mine is not working/malfunction
I havent tried fixing ours yet but if you need a small pry to open it try glasses screw drivers or sewing machine accesories. I have many vintage machines so many small tools. Even those old keys to open cans they have a skinny pry end. Once you get it open a bit on one side run a dime or something around it. Ive done this on lots of tiny hard to open doors etc. on kids toys, machine parts, even the dang metal key rings that break your nails. Start skinny and work your way around with thicker items.
Can i get some parts to this pilot ? I have broken scroll wheel
On the newer remote ALB758555001 the fix was just to glue the axel holding the wheel back to the piece soldered on the motherboard.
Same! They should make the axle out of metal and free of the wheel.
ahaha, i like your desi fix. the idea is to make use of limited resources we have available at home and get the job done. weldone.
And if broke another side ?
Mine broke on the left side of the wheel, I used a coat hanger. I do have the click back now but the wheel does not scroll.
i wonder how he managed to brake the klicker! normally the other side breaks, just like mine. that little 6 sided pin who goes in the scroller is just so tiny it has to break one day. thats a mayor design flaw by lg. i repaired mine but its very hard to scroll and press the button.
No its not a flaw. Its totally designed to break. To make you buy another one!
@@aytacbayram210 yeah your right man. obsolet after a month of use. i tried a cx remote on my e9 so i don't have to buy a new one. but it doesn't work at all. so i fixed mine again. i just hope the new c1/g1...remotes are better and more reliable than the old ones.
Thank you 😊
شرح رائع شكرا❤🌷
My remote works but I'm suffering from the same thing that you're going through but I'm terrified to take it apart and repair it
Hey dude, can a help me ? I've a smart magic remote control (mod. AN-MR19BA), but now, the light's on-off always stay on. I don't know Why ... i changed the battery, open the inside but don't see nothing error.
Do you saw the error or know is happen ? Thks
my remote not broken but ok button not working, why
Had mine just over a year and it broke.Ironically it sat boxed in my house while I waited for an electrician to fit it on the wall with a bracket. So used less than a year in reality. Seems like a common design flaw.
Nice sharing ..
Gracias
Help! My wheel is working but NO CLICK!
How do I fix this problem? Thanks!
It works? To turn the wheel up or down ? Click works without that to....
Thanks !!!!
Toma tu merecido like
great video, what if the other side is broken?
Fix it
Pull the tiny broken piece of axle from the housing. Put a tiny bit of super glue on the tip and sit it onto the wheel. Wait to dry and put back together.
Thanks. Now I can stick some tape under the stupid Netflix and movies buttons I keep pressing accidentally 😂
Mine is not working where can I buy exactly same one you have mine is same?
Hi. The problem in mine is the red button for on-off function. Is not responding and I need to connect/disconnect tv manually.
Do you know how can I fix it?
Thanks
Same problem I got...
the cursor moves over the screen with my magic remote but without I am touching it. It is impossible to focus it. Anybody got a solution?
You saved my money bro. Tnx
When i'm trying to give my tv voice order's . the tv gave me msg , you must go to wifi Connection first , is that normal to give an voice commands , should i turn the wifi connection on first before i give my lg tv an voice command's ?? is that normal or that is such a problem in my tv setting even in software or hardware ??
The voice recognition works over the internet, the processing isn't done on the tv.
My scroll wheel stopped scrolling after 2 weeks. I'll settle for one of my old LG remotes that work just as well.
How to buy a scroll well spare part
My issue is not the wheels, Is the click in select action that is malfunction. It doesn't bounce back. Not the black rolling part but is the clicking button on board. Do I have to get a complete remote. Anyone knows how to fix. Please share will be appreciated.
Lol I'm having the same issue.....Have u called lg for the warranty, I'm gonna call them tomorrow, my tv is 5 months old my remote shouldn't break. If they say no I'm gonna buy a new one, amazon has it for $20.
Update: I opened mine and lg made it to be cheaply broken so they can sell u more remote. The plastic that hold the wheel is weak and skinny it's meant to brake with each press (the more you use it). And also i've watch 3 different repair videos and they all have different wheel model that holds the wheel up. the newest model is the weakest one (which I have). I'll try to super glue it but than again it's meant to be broken so it's whatever.
What remote model number is it and what lg model TV are you using it on? I have a lg49uf690v television but don't have a remote and need one. Thx
@@MrPierre8081 I got an LG oled c9. I called them and they gave me a freeeeee remote lol. I bought the tv 9 months ago so I asked if the warranty covers the remote control. At first She thought I was talking about the tv and said "yesssss, what's wrong with the tv. Tv doesn't read the remote" I was like: no, the tv works perfectly. She was like ohhhh ok I'll send u a remote than.
Hey did you fix it? Same thing happen here
Aap kaha se Punjab amrtsar me hota hai reper
My 0roblem is in the small bin .. its brok .. i can't scroll the weel and I can't press
This Remote is what price whair Avleval shamrt Lg Tv Remote
LG AN MR19BA Magic Remote not working please help me please 🙏🙏
My magic remote ok button not working.. other buttons and wheel are working .what can I do
Same here.
Hey did u fix this?
My remote wheel is broken
Thanks, 2021
my remote wont clip back together :(
ذخیره کردن ترجمه
Hello
Water spilled on my remote control. After working for a while, the red light will turn on. Can anyone help me?
Dabba t.v are the best one 😂
Pero si lo que no funciona es "el boton mismo" 🤔
I have ordered a AN-MR19BA for my lg TV(OLED55B9PLA) AND WILL WILL NOT REGISTER AT ALL
Not working
Magic wheel replacement
Plz made fast video
That button won't last long this way, this remote is costly but you don't need to buy the same remote again, simple remotes are also available in the market @ Rs 150/- only
U skipped the very beginning..HOW DO U OPEN THE REMOTE!!!!!
Ñ
Rizvi samad bandra EW India Khar Mumbai Maharashtra malid mausa hata de
Your ruining it runnnnnnn!!!!!!!
Please view the video yourself before publishing.
These magic remotes are a sack of shite. Cheap shoddy materials