livia sent me a couple of hand held jumper packs and launch scanners.. one was the launch 4001 and i forgot what number the second one was..she just sent me out this scanner so im excited to get it. for ky everyday scanner i have the new autel maxisys so ill review this one and do a give away for all 3 scanners for my subscribers. this was a veey well presented video... v3ry in formative. great job!
Can this scanner diagnose an ABS problem...I need to know which wheel sensor is bad....can it tell me, or would I need a much more expensive scanner for that?
I just purchased this reader and I'm trying to do an ABS bleed. Any advice? I've tried going into the reset settings and it wont read my 2003 Land Rover Discovery II info.
I don't know anything about the Autel but I'd probably go with that one because it is newer and currently being sold and supported. The CR9081 appears to be discontinued.
Hi I lost my sd card and I am currently having problems downloading and installing the firmware on the new sd card, can you please help me out. Thank you
Why is the unit giving you metric data on your Honda (freeze frame) ? I thought you set it for Imperial units. Don't tell me you have to set it every time you connect to the car! But on your RDX it did show imperial units.
Ah, you are very observant. Thanks for the feedback. I recorded the raw video of the Honda the day before I recorded the intro segment where I changed the default units from metric to imperial. Rest assured, the settings do persist and you don't have to change them every time.
thanks! Can this reader help in diagnosing other systems such as ABS/SRS etc? I see that it supports resetting some of them but does it give live data for other systems e.g. AT or ABS or SRS like more expensive scanners?
Unfortunately not. It does not read transmission, ABS, SRS, or body module codes. I think that's what keeps this from being one of the ultimate DIY or lower-end pro scanners.
thanks for the video I was looking for a good scan tool and saw this on Amazon but I think so far the Autel Maxidiag MD802 is winning though it doesn't seem to do tpms resets or any kind of re but it has abs and srs management capabilities. if you ever get a chance please review it
That does look like a nice scan tool. I did just receive the Autel Dialglink and will be reviewing that soon, though, it doesn't look to be as advanced as the Maxidiag.
it supports it . the vehicle does not support a function the tool is capable of . for example if the car does not have vvt it cannot show a data point for it .
Do you connect scanner after starting switch or before, I see you connect only on ignition but if you need know RPM you starting with scanner connecting? Regards
livia sent me a couple of hand held jumper packs and launch scanners.. one was the launch 4001 and i forgot what number the second one was..she just sent me out this scanner so im excited to get it. for ky everyday scanner i have the new autel maxisys so ill review this one and do a give away for all 3 scanners for my subscribers. this was a veey well presented video... v3ry in formative. great job!
How about Tooth learning? In the box shows to have that function but in the menu in the device is missing
Can this scanner diagnose an ABS problem...I need to know which wheel sensor is bad....can it tell me, or would I need a much more expensive scanner for that?
I would contact the manufacturer for a definitive answer to your question.
I just purchased this reader and I'm trying to do an ABS bleed. Any advice? I've tried going into the reset settings and it wont read my 2003 Land Rover Discovery II info.
Great review as always man!
Hi i neded to buy how much the priceam calling from ghana
Thank you for a great review. I am deciding between an Autel MD802 and the CR9081. Which one do you like better and why?
I don't know anything about the Autel but I'd probably go with that one because it is newer and currently being sold and supported. The CR9081 appears to be discontinued.
It’s been replaced by the Launch Millennium 90
Hello, I would like to know if you read and erase airbag failures
I recommend that you contact the manufacturer directly with those specific questions.
seems like a good scanner
tnks my friend!!!!!
Hi I lost my sd card and I am currently having problems downloading and installing the firmware on the new sd card, can you please help me out. Thank you
I suggest that it would probably be better to contact the manufacturer's customer support department for assistance.
Hy did you get help
Why is the unit giving you metric data on your Honda (freeze frame) ? I thought you set it for Imperial units. Don't tell me you have to set it every time you connect to the car! But on your RDX it did show imperial units.
Ah, you are very observant. Thanks for the feedback. I recorded the raw video of the Honda the day before I recorded the intro segment where I changed the default units from metric to imperial. Rest assured, the settings do persist and you don't have to change them every time.
thanks! Can this reader help in diagnosing other systems such as ABS/SRS etc? I see that it supports resetting some of them but does it give live data for other systems e.g. AT or ABS or SRS like more expensive scanners?
Unfortunately not. It does not read transmission, ABS, SRS, or body module codes. I think that's what keeps this from being one of the ultimate DIY or lower-end pro scanners.
worsethanchiggers
thanks for the video I was looking for a good scan tool and saw this on Amazon but I think so far the Autel Maxidiag MD802 is winning though it doesn't seem to do tpms resets or any kind of re but it has abs and srs management capabilities. if you ever get a chance please review it
That does look like a nice scan tool. I did just receive the Autel Dialglink and will be reviewing that soon, though, it doesn't look to be as advanced as the Maxidiag.
can it do abs bleed on a 2002 ford explorer
I suggest you contact the manufacturer at launchtechusa.com/
friend can you help me with some link of the page to be able to download the firmware of this model please
I suggest that you contact the manufacturer for a definitive answer to your question.
why does this scanner dose not support this vehicle
it supports it . the vehicle does not support a function the tool is capable of . for example if the car does not have vvt it cannot show a data point for it .
Hello frend ! Launch greader 619 ,newest veri good, read engine ,abs and srs ALIEXPRESS 63 euro .
please how to i update the device
That question was my primary complaint when I made this video.
I am lik 9081scannar
Do you connect scanner after starting switch or before, I see you connect only on ignition but if you need know RPM you starting with scanner connecting? Regards
The ignition switch only needs to be on to read stored codes but to read most real-time data, start the engine.
@@WorseThanChiggers ok, but starting engine with scanner connected or first start engine and then connect the scanner? Thanks for your response.
Either will work with the same results.
@@WorseThanChiggers thank you for your support!!!