Thank you very much for the video, it is very practical and revealing. Can you tell me the model of head tube expander you use? On Aliexpress or similar I only find models with space for a single brake tube
Question : if you drill the fork for the stem cable, isn't too tight if you want to servis headset or regrease or degrease the headset bearing? (Remove the stem/ too lose the fork a bit low so can clean and degrease the headset bearing)
@@Lidrrz hi, it becomes like a normal bike with integrated cables and therefore if you want to replace the bearings you have to dismantle everything. Greasing without a full cleaning the bearings is not a solution
@@gx_peppe_0798 per sterzo OD2 non esiste, occorre modificare quello originale o l’aircap. Per versione Od1 puoi usare quello per i sistema Fsa Acr o l’Intend Smarty.
Ciao, ho già acquistato la coverstem per l’attacco manubrio con voi e vi ringrazio per aver dato un ottimo look in quella zona 😍 ci sta modo di reperire le misure per questo lavoro? Più dettagli da poterci lavorare? Grazie mille 🙏🏻
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Bellissima! Gran bel lavoro🎉
@@fredbr95 grazie c’è ne sono altre sul mio canale youtube e Instagram, seguimi 😉
That is awesome! Didn’t think it was possible to doit like that 👏
@@hockysa yes bro, i do this from 2 years see my other video/shorts about this and my site 😉
Salve,veramente un bel lavoro,che tipo di expander ha usato?
@@simonedirollo1698 grazie, ho modificato quello di serie tipo gli fsa acr ma per due cavi
is this possible for the domane al 2 gen 4? thank you!!
@@holaboy5405 send me an email to coverstemtcr@gmail.com with all specs
Hello thanks for this video. What size for the 2 fork hole ?
@@olivierlemaire4450 complete guide on my tutorial, see the link in description
Is this safe? No additional carbon/resin reinforcement for bored holes in the fork, stem and handle bar? 😮
disclaimer 👉🏻 *The video is for informational purposes only*
you can try to do this with other method 👌🏻
Thank you very much for the video, it is very practical and revealing.
Can you tell me the model of head tube expander you use? On Aliexpress or similar I only find models with space for a single brake tube
@@KevinCupraR for OD2 tubes not expander on market, it’s custom part.
You can try with Giant air cap
@@KevinCupraR see my other videos and my store
Great Job!!!! Is posible in a tcr advanced pro 0 disc 2019???
@@masomoza75 yes look this shorts: Giant Tcr 2020 switched to the future 🚀 with no cables!
ruclips.net/user/shortsH-U2dY3JDzQ?feature=share
great video, i wonder if i can do this with my revolt advance 2022
@@jebsenearl yes with di2 or Axs
@@coverstem awesome, lemme talk to my mechanic, im using axs xplr etap
@@jebsenearl all guide tutorial and tools on my store
is it better to drill hole than use the exs fork?
@@bet609 It depends on your spending budget, I remind you that the conversion can also be done using only original parts
Question : if you drill the fork for the stem cable, isn't too tight if you want to servis headset or regrease or degrease the headset bearing? (Remove the stem/ too lose the fork a bit low so can clean and degrease the headset bearing)
@@Lidrrz hi, it becomes like a normal bike with integrated cables and therefore if you want to replace the bearings you have to dismantle everything. Greasing without a full cleaning the bearings is not a solution
@@coverstem noted, thank you for answering ✌️
Hai delle officine specializzate che fanno il lavoro di integrazione cavi in Veneto ? Mi interessa per la mia giant tcr
@@alberto4231 mandami una mail, é in descrizione l’indirizzo
L expander dove posso trovarlo?!
@@gx_peppe_0798 per sterzo OD2 non esiste, occorre modificare quello originale o l’aircap. Per versione Od1 puoi usare quello per i sistema Fsa Acr o l’Intend Smarty.
Ciao, ho già acquistato la coverstem per l’attacco manubrio con voi e vi ringrazio per aver dato un ottimo look in quella zona 😍 ci sta modo di reperire le misure per questo lavoro? Più dettagli da poterci lavorare? Grazie mille 🙏🏻
@@mariomora91 scrivimi alla mail ✉️
Fork plug & play on stock on www.coverstem.com