Well he would be waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaayyyyyyyyyyyyyyyyyyyyyyyy better than TRUMP!!!!
If you connect them to two flat boards combined with a piano hinge, then you can easily push them closer to the wall. Takes up a bit more wall space, but doesn’t stick out as far into the garage. Great video! Very enjoyable.
Nice setup Blake. Very inspiring. I might suggest one small tweak to your bike racks. Offset the middle one by a few inches up or down to prevent handlebar overlap. Rock on!
Lol, familiar with the channel and an occasional viewer, this time I ended up here after googling 'bike storage solutions'. Ahem, after my wife said 'another bike?, well, we need a good storage solution then ...' so there you go. Nice video!
Mister Wizard! Thoroughly enjoy how Blake can crank it all the way left for Insane Beast Mode Fun and all the way right for Professor Fun. What a dad!!
Great vid, really enjoy the "Blake Builds" series. A winter trouser review would be awesome, maybe a budget pair at £50ish Mid range £90ish and premium for around £130ish.
Great project! I'm doing something similar, and if one has the ceiling height to work, and short on total width, stagger the front wheel brackets vertically so the handlebars of each bike don't interfere with each other.
Hey Blake top tip... Rotate the wheel bracket things 15-20 degrees. Makes the handle bars angle away from each other. Easier to take the bikes on and off the wall without cables/bars tangling. Bonus... You'll have more room between the wheels and rafters
HaHaHa Blake as a veteran carpenter, 42 yrs ,curved stair builder and railing installer , I love watching your attempts at all this, it reminds me of my very early years , Seriously, While a little rudimentary ,Your Enthusiasm and Pride is AWESOME and Contagious , The only addition would be maybe start using a little sandpaper around the edges and some glue ,I look forward to watching your handy skills grow and improve. Keep it up Buddy. A small work bench for yourself would be nice to watch.
Done a great job there Blake, wish I had the room to do similar in my garage but it's just so full with bike stuff, tools, pillar drill, hydraulic press, bench grinders, welder, lubes, enough nuts, bolts, screws brackets etc to stock a hardware store and that's not to mention the bikes and a motorbike. I've got pretty much everything to tackle most jobs but have to move stuff out to the garden to be able to use it as a workshop, I kinda went a bit overboard knitting it out !
Size 8 shoes! Baby foot Blake! Should put the bike hangers on big heavy duty hinges on one side so you can put them on and then push them across so they take up less room.
Absolutely more! Do the work station, yeah. I've already built my mini kicker, had to build 3 because that 18" was toooo high. So I built a 6" than a 12" and soon I hope, I will actually jump the 18". So far loving the 12"! Also just finished my manual trainer, but haven't tried it yet. Baby Steps! Thanks for all the Video, absolutely priceless
Takes me back to the manual trainer... i imagined Blake drilling a hole in the trainer in front of the wheel and hanging it up as a similar style of bike storage. Might need another little chock at the top of the trainer to prevent the wheel rolling out when in storage mode. Nice garage Blake!
I may have went with a pvc pipe for the shoes. just so they don't rot the wood or mold overtime. also hung them the other way so the water would drip towards the toe. love the set up though for a small area. super clean!
Thanks for the inspiration Blake! I’m currently using the rubber hooks for my bikes and never thought about them scratching the rims! 😱 I’m definitely going to borrow some of your ideas 😉 thanks!!!
This is awesome Blake! Keep it up. I would line the rest of the walls with sheet plywood like you have going to make it seem more roomy feeling. Definite workbench video in the future though.
Awesome video Blake. Totally inspired me, so I built one bracket this weekend to hang my fiancee's bike, worked awesome. Will probably build another tomorrow for my bike. Thanks for getting me off my butt :)
Great video. I personally found the 22" to be a bit long for my bikes though. I had to cut my road bike down to 18" to clear the frame and another one to 20" to fit my mud guard. If I built them again I would probably make them 20" instead of 22". Still super stoked on how they turned out though. They look great and my garage is a lot more organized.
Perfect timing on this video!! Just in the process of planning my own bike cave / work place in a very small storage area of about 2x2 meters. Also needs to be our general storage area and fit a big stroller... Pretty sure I'll use ever square inch of wall space and probably the ceiling too 🤔
What would you like Blake to build next? Let us know in the comments below 👇
Global Mountain Bike Network could Blake build a kit organiser for your shoes, camelback, helmet etc
@@joeocarroll1561 great idea
I know he kind of made one but maybe a seperate unit for a bedroom?
Do something on bike security like installing ground anchors
Shoe storage- but for a lot of shoes.
Hiring Blake as a presenter was the smartest decision this channel has ever made
Sam Davenport apart from letting scotty leave
@@Fopppyable blake is much better
Absolutely. He's awesome
We love Blake. Blake for president. Do you think Blake can run for president in the U.S.?
I have no doubt he could, and would also be better than current president. Make America Ride Again!
Well he would be waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaayyyyyyyyyyyyyyyyyyyyyyyy better than TRUMP!!!!
@K H If you don't care, why do you then comment here???
@K H Whats wrong with u man???? These dudes are not wrong. Trump is the worst.
K H it was a joke you sound kinda triggered
I enjoy the local recycle place. Kudos for using it and putting out there for people know its ok to reused the used.
I will definitely be doing this this summer!!!
Why not do it now?
Will do the same thing when the semester’s over
My two cents would be to offset the shoe racks so when the top ones drip it doesn't transfer to shoe below. Great work!
Doddy is officially pretty much the best person in the world, because of those "Spongebob" transitions!
I know 😂
@@benjik9294 Haha hello again
Hey
@@ozan3076 Hello Rozan :D
@@th_js Yeah Doddy's the transition master
If you connect them to two flat boards combined with a piano hinge, then you can easily push them closer to the wall. Takes up a bit more wall space, but doesn’t stick out as far into the garage. Great video! Very enjoyable.
Nice setup Blake. Very inspiring. I might suggest one small tweak to your bike racks. Offset the middle one by a few inches up or down to prevent handlebar overlap. Rock on!
Thomas Dunkerley, exactly what I was thinking. So, did 3 bikes actually fit together on this layout?
1 minute in and I gave a thumbs up before I saw the project and you didn't disappoint
Im currently building a near identical bike rack after seeing Blake build his, Ill send in photos of the newly built bike cave when I finish!
Blake, best Carpenter ever, nobody wears the goggle so professional as he do😉👍
come on Blake build your work station.... these kind of videos are awersome
More of these DIY videos from Blake, there a good watch and I love a bit of DIY myself
I thought about bike storage and instantly though I bet blake has a diy for us, these are the best videos
I just built these and they look fantastic in our garage. Thank you so much for this video!!!!
nice one. do you think you will consider building this one too? ruclips.net/video/jq-nh_QP9cI/видео.html
Blake, thanks for giving me some great ideas & inspiration to get my bikes (4) off the floor!!
hope this will inspire you too. ruclips.net/video/jq-nh_QP9cI/видео.html
Happy to Have It!
Hey GMBN team, great vid and thanks to you guys I learnt how to bunnyhop today!!! :D I mean it's nothing insane but it's a start!
we've all been there! Congrats, now put it to work on the trails :)
It means a lot! You’ll start riding stuff you have never thought can be riden
@Marc Moore RAD! 🤟 It's such a great skill to have 👍
Would watch any of Blake's vids tbh, as long as he's having fun :)
Slick. This is giving me some ideas for my shed. Get the work station done ASAP
Love the DIY video. Also nice Jeep in the background.
Lol, familiar with the channel and an occasional viewer, this time I ended up here after googling 'bike storage solutions'. Ahem, after my wife said 'another bike?, well, we need a good storage solution then ...' so there you go. Nice video!
try this one out, no harm exploring some options. ruclips.net/video/jq-nh_QP9cI/видео.html
Id watch Blake build things all day.
Thinking of doing this myself thanks blake!
gmbn is the last place i thought i would see this profile pic lmao
Yes a small workstation on the right would be good with a peg board for tools at the back 👍
Mister Wizard! Thoroughly enjoy how Blake can crank it all the way left for Insane Beast Mode Fun and all the way right for Professor Fun. What a dad!!
Love Blake’s builds
Great vid, really enjoy the "Blake Builds" series.
A winter trouser review would be awesome, maybe a budget pair at £50ish Mid range £90ish and premium for around £130ish.
Great project! I'm doing something similar, and if one has the ceiling height to work, and short on total width, stagger the front wheel brackets vertically so the handlebars of each bike don't interfere with each other.
Interesting to hear you switch from metric to the old measuring system - great video
nice comment. can you take a look at this one too? ruclips.net/video/jq-nh_QP9cI/видео.html
How can you anyone not love Blake. ❤
I just love your energy and enthusiasm! Very addicting!
Hey Blake top tip... Rotate the wheel bracket things 15-20 degrees. Makes the handle bars angle away from each other. Easier to take the bikes on and off the wall without cables/bars tangling. Bonus... You'll have more room between the wheels and rafters
🏆 ... just what i was about to say. 👌🏻
Blake we love your woodwork
I wonder how often blake said super in this video😂😂
A super amount of times
Nicely done, Blake. Can’t wait to see the work stand.
Those hooks through the wheel work a treat if you slide a piece of automotive heater hose over them
Who knew Blake was so handy! Great ideas here and all simple and well executed.
Tidying Up with Blake Samson
The only issue might be that Blake is so enthusiastic that everything would spark joy. 😀
Well done Blake!
Top bloke Blake and not too bad a chippie!!!
HaHaHa Blake as a veteran carpenter, 42 yrs ,curved stair builder and railing installer , I love watching your attempts at all this, it reminds me of my very early years , Seriously, While a little rudimentary ,Your Enthusiasm and Pride is AWESOME and Contagious , The only addition would be maybe start using a little sandpaper around the edges and some glue ,I look forward to watching your handy skills grow and improve. Keep it up Buddy. A small work bench for yourself would be nice to watch.
blakee-Blakee Please make more DIY videos...
great content Blake, inspired me to finally sort out the bike area in my own garage. Definitely like to see a work station idea next :)
I can’t wait to see the rest of your builds 👌🏻.
Blake’s a brilliant presenter too
Fantastic stuff Blake, I hope to get my garage sorted soon. This has inspired me to get my arse in gear
Hey this worked great! I built 6 of these this weekend and hung them along the wall of my garage.
i think the second shoe rack needs to be offset cuz as it is your wet shoes will just drip on the others
or put the wet shoes at the bottom....
You can only put one pair on at a time
This episode was SUPER!
Thanks Steve!
fantastic video Blake! some good ideas in the vid. ill try to replicate some in my garage
Super cool, everything at one place and organized; a Workstand would be amazing right next to it
Done a great job there Blake, wish I had the room to do similar in my garage but it's just so full with bike stuff, tools, pillar drill, hydraulic press, bench grinders, welder, lubes, enough nuts, bolts, screws brackets etc to stock a hardware store and that's not to mention the bikes and a motorbike. I've got pretty much everything to tackle most jobs but have to move stuff out to the garden to be able to use it as a workshop, I kinda went a bit overboard knitting it out !
Size 8 shoes! Baby foot Blake!
Should put the bike hangers on big heavy duty hinges on one side so you can put them on and then push them across so they take up less room.
YEAS BLAKE WE LOVE THIS DIY STUFF!!!
Absolutely more! Do the work station, yeah. I've already built my mini kicker, had to build 3 because that 18" was toooo high. So I built a 6" than a 12" and soon I hope, I will actually jump the 18". So far loving the 12"! Also just finished my manual trainer, but haven't tried it yet. Baby Steps! Thanks for all the Video, absolutely priceless
Looking sick dude !! Every man should have a bike cave !!!!!!!
Hell yeah make a workbench, think I might do that idea for hanging the bikes
Takes me back to the manual trainer... i imagined Blake drilling a hole in the trainer in front of the wheel and hanging it up as a similar style of bike storage. Might need another little chock at the top of the trainer to prevent the wheel rolling out when in storage mode. Nice garage Blake!
Love how it came out and make that work station..
👍🤟
Building with Blake is awesome!!! More stuff like this
Love the brackets will be copying that one
Super stocked and super happy, everything is super great. Super
🤟
Love it! Awesome Blake! Inspired me to work on mine!
Blake builds a mountain bike rack that can double up as a surfboard rack as well ;) gets my vote lol.
more Blake DIY!!!
Yes! Work bench video please!
Blake rocks!
looks brilliant! well done!! I would stagger the shoe racks so the top shoes drip between the bottom ones and not on them.
Great idea built myself one just yesterday, works insanely well!!
Love what you did ! Make a flip down work bench with folding legs / tool cabinet.
hats off to Blake, he must be the most economic presenter in the world filming aswell
That was a damn awesome, doable and neat storage wall!!!!!
Yeah we wanna see more!
A Double GMBN 'Super Nice"
Shoes for clip's and flat's on the sic rack nice.
given me even more motivation to get myself my own house and build a bike cave!
I love these diy videos
Loved this some great ideas that work really well great work love to see more Blakey 🤘🏽
great comment. you think this one will work well too? ruclips.net/video/jq-nh_QP9cI/видео.html
Best DIY so far Blake! Maybe add some lighting?
I may have went with a pvc pipe for the shoes. just so they don't rot the wood or mold overtime. also hung them the other way so the water would drip towards the toe. love the set up though for a small area. super clean!
Thanks Blake, great video!
1:31 ooo that hub
Great work blake
Sweet work blake 🤩
Cool project Blake, u may wanna add two more items, what i called a ride package: gloves and knee guards. Have a place for these guys to 'air dry'.
Wow 😮 Blake your great bike rider and awesome carpenter 😁👍😊🏋️♀️🚵♀️ Blake’s bike home improvement show 👏
Simply done. Perfect! 😊
Thanks Ben 🤟
This is my favourite build Blake! Good job!!
Thanks for the inspiration Blake! I’m currently using the rubber hooks for my bikes and never thought about them scratching the rims! 😱 I’m definitely going to borrow some of your ideas 😉 thanks!!!
Good jobs Blake thank you for this video
Nice Blake, some good ideas there.
I'm going to have to update my shed now
This is awesome Blake! Keep it up. I would line the rest of the walls with sheet plywood like you have going to make it seem more roomy feeling. Definite workbench video in the future though.
Awesome video Blake. Totally inspired me, so I built one bracket this weekend to hang my fiancee's bike, worked awesome. Will probably build another tomorrow for my bike.
Thanks for getting me off my butt :)
Simple and practical. Good stuff.
Great job Blake! 👍👍
Looks good Blake
Great video. I personally found the 22" to be a bit long for my bikes though. I had to cut my road bike down to 18" to clear the frame and another one to 20" to fit my mud guard. If I built them again I would probably make them 20" instead of 22". Still super stoked on how they turned out though. They look great and my garage is a lot more organized.
good for you. can you improve this one too? ruclips.net/video/jq-nh_QP9cI/видео.html
Jeez gets some better security on that garage!
wonder what can you point out on this one? ruclips.net/video/jq-nh_QP9cI/видео.html
Perfect timing on this video!!
Just in the process of planning my own bike cave / work place in a very small storage area of about 2x2 meters. Also needs to be our general storage area and fit a big stroller... Pretty sure I'll use ever square inch of wall space and probably the ceiling too 🤔