Yes it might damage the display. You might not get warranty from the brand if u apply uv glass. It also effect mother board if the gel entered through the display and morever it is quite hard to remove the uv glass by ourself without damaging the display y@@zeeshansadiq2482
@@sangyallama2341The UV tempered glass is made to stick to a phone screen and not to the screen protector. So if you don't remove the protector, the tempered glass will not stick properly.
Mere yaha pe shop waale bole it's risky for mobile..woh liquid punch hole me jata hai karke boley.. i dint wanted to take risk toh scratch guard aise hi pada hai.
the trick is to cover the fingerprint area with your thumb with very light pressure and cure the rest of the area for 60 seconds. After curing the rest of area lastly remove your thumb and cure the fingerprint area last and the fingerprint will work flawlessly
@@veganfoxgaming222 me here ,had same issue with this type of glass i removed it today itself,do you use any screen protector can you pls say me the name of it, and one more thing is that liquid corrosive?
Could be the glue is too thick and its messing up the recognition. Try re-registering the fingerprint - this normally works. If that doesn't work, you can put a sticker where the fingerprint sensor is on the protector before you cure the glue with the UV light. Then, after you cure the rest of the phone, gently press down on where the fingerprint is to make the glue thinner there and easier for the reader to pick it up.
Bhai maine order kiya..pr ..ye glass km .. plastic jaisa lg ra h...bilkul bhi weight nhi h...kya galat product mil gya h😢😢plzz reply ...kya glass ka weight bahoot km hota h .
UV light is not functioning/burning. I think it's a I got it as damaged condition. But it's not refundable or exchangeable. What to do?? Is there another option?
@@goutambiswas4234 it's not silly, it's the only option you have now, just go to a shop they have a uv light device they will apply your tempered glass for you
Better you change it once you find bubbles coming or else if you are confident that you will not drop your phone, you better install a scratch card which is like a thin layer, it's available in matte finishing also & it will last unless you won't replace it 💯
hello sir uv glass compulsory 3 month ke bad badalna padta hay .nahito wo permanently fix hota jata hay.ye sach hay kaya. agar wo glass film protector par lagye to chlega kaya
difficult. heat it up, pry loose one upper corner (or two) to make a start for entry, then use fishing wire (which usually is very strong) to slip in-between the glass and the display more and more, making 'sawing' moves as you go. reheat when necessary. after all glass is off (be careful not to cut yourself on shreds, they can be very sharp) use 96% isopropyl alcohol to clean off remaining residue of the glue
Mainai aaj curved tempered glass lagwaya tha or unnai 15 mins rekha tha merai mobile ko yai UV light machine kai nichai to kya 15 min tak rekhna sahi rhaita hai plzz btado koi merai friend bol rhai jada mins tak rekhdiya usnai ab glue bhott hard hogya hoga.🥲🙏
You can reuse that glass. All you need to clean glass and phone screen with fiber cloth. I fixed it in 4th attempt. Working fine. You must have enough uv paste
don't buy this crap!!!!! big risk and you can damage the display or the fingerprint reader won't work!! better is a self-adhesive protective glass! that's what I bought and I'm very happy. 👌👍
Maraming salamat Po super effective Buti nakita ko video mo Po,dahil nahirapan Ako gumamit sa uv lamp ,❤
Thanks Bro... I Spoiled 3 uv screen guards. After your video i did well ❤
Hi bro, can you plz tell me is there any side effects of using uv glass on curved display phones ?
Yes it might damage the display. You might not get warranty from the brand if u apply uv glass. It also effect mother board if the gel entered through the display and morever it is quite hard to remove the uv glass by ourself without damaging the display
y@@zeeshansadiq2482
Warranty khatam ho jati Company se mobile ki @@zeeshansadiq2482
Yes don't try to remove them bcz once removed u need to apply new protection guard again 😢@@zeeshansadiq2482
Saw the video messed it up. Better go to shop and get it done. No worth trying on your own
If u never did anything like this or anything that requires precision than yes. 100% should get a shop do it for u
Background music just awesome!
arey bhai bhahut acha job hai
Can it be applied on redmi note 13 pro plus? Please reply
Is it necessary to remove screen protector before applying uv tempered glass.
Yes, you have to remove screen protector before installing tempered glass
@@ZixoXio can I know why it is necessary pls
No it's not. @@sangyallama2341
@@sangyallama2341You can't use two condoms at the same time can you?
@@sangyallama2341The UV tempered glass is made to stick to a phone screen and not to the screen protector. So if you don't remove the protector, the tempered glass will not stick properly.
Mere yaha pe shop waale bole it's risky for mobile..woh liquid punch hole me jata hai karke boley.. i dint wanted to take risk toh scratch guard aise hi pada hai.
Mainy kl lgwaya shop sy, shop Waly sy pocha koi side effect ni but dost kh rhy KY mobile khrab ho jata or screen issue wgaira wgaira
I bought this product but the finger print cannot be used
Are you using a Samsung s23 series phone?
I wanna try to buy this just bcs to fix the glass protector cannnot detect fingerprint sensor
the trick is to cover the fingerprint area with your thumb with very light pressure and cure the rest of the area for 60 seconds. After curing the rest of area lastly remove your thumb and cure the fingerprint area last and the fingerprint will work flawlessly
@@veganfoxgaming222 me here ,had same issue with this type of glass i removed it today itself,do you use any screen protector can you pls say me the name of it, and one more thing is that liquid corrosive?
Could be the glue is too thick and its messing up the recognition. Try re-registering the fingerprint - this normally works.
If that doesn't work, you can put a sticker where the fingerprint sensor is on the protector before you cure the glue with the UV light. Then, after you cure the rest of the phone, gently press down on where the fingerprint is to make the glue thinner there and easier for the reader to pick it up.
Can we remove uv glass again
Nothing happened as i expected 😭😭😭 i ruined it !!! It looks so easy, but it isn't! Bubbles everywhere 😭🤧
Try this way again. I got successful in 4th attempt
There is enough uv solution in tube
Is ultra violet light safe
Kitne time baad change karwana chahiye UV tempered glass
Watching this video after spoiling my screen guard
Uv light ke bina glass set ho sakta hai???
No
Kon kon reals dak kar aya hai like karo 😅😅
Don't apply by yourself after watching this video ... !! I had a Bad experience ..... incomplete process told in this video !!
Actually i got successful after watching this video. I had 3 attempts already. You know that you can clean that glass and phone screen. And try again
@@fahadx2How do i clean the tempered glass to re apply. The gum is sticking om it so I don't know how to remove the gum.
@@browser4frfr bro i used dish washer. It worked.
@@browser4frfrYou can removed the glue with alcohol liquid 95% , you can buy in pharmacy
thank you!❤
Bhai maine order kiya..pr ..ye glass km .. plastic jaisa lg ra h...bilkul bhi weight nhi h...kya galat product mil gya h😢😢plzz reply ...kya glass ka weight bahoot km hota h .
UV light is not functioning/burning.
I think it's a I got it as damaged condition. But it's not refundable or exchangeable.
What to do?? Is there another option?
go to a shop
@@adityakalaac-5022
Very silly answer.
use sunlight
@@goutambiswas4234 it's not silly, it's the only option you have now, just go to a shop they have a uv light device they will apply your tempered glass for you
Maine Jo market se lgaya h usme side se thoda gap h 😢 fully covered nhi hua h
Ye accha hai kuki nikalte wqt halat khrb ho jata hai 😆
Maine v lagwya 300 ka ab soch rha hu 1 month baad remove krke normal screen guard lagwaunga
@@dhruv__bhardwaj hn main v change kraungi
easily remove hua apka glass??
@@akshatverma6534 abhi tak to ni change Kiya hai maine
Glass Link?
Bhai 5-6 mahine baad ye nikalne jayenge to display bhi nikal aata h aise bol rhe h log..sach me aisa hota h kya
Uv glass sahi ya normal bahut log bolte uv glass tutane pe niklne me bahut dikkat hoti 1 percent chance hota hai display jane ka
Nahi nikalta hai
Bahi agar mai ise 3 mahene mai change na karau to kuch hoga to nahi na screen ko
bhai mere phone me 8 mahine se laga hua hai kuch nhi hota jab tak na tute use karo
Better you change it once you find bubbles coming or else if you are confident that you will not drop your phone, you better install a scratch card which is like a thin layer, it's available in matte finishing also & it will last unless you won't replace it 💯
Nice video
Does the Old protector came from first screen protector when u buy it?
hello sir uv glass compulsory 3 month ke bad badalna padta hay .nahito wo permanently fix hota jata hay.ye sach hay kaya.
agar wo glass film protector par lagye to chlega kaya
Nhai Bhai heat krne se nikal jata hai glasss esly
Does the UV light come with the glass?
Yup
Yes
How to remove if broken glass ?
difficult. heat it up, pry loose one upper corner (or two) to make a start for entry, then use fishing wire (which usually is very strong) to slip in-between the glass and the display more and more, making 'sawing' moves as you go. reheat when necessary. after all glass is off (be careful not to cut yourself on shreds, they can be very sharp) use 96% isopropyl alcohol to clean off remaining residue of the glue
Use sanitizer
Bhai a 1day badme babool arahahai kya karoo
Kuch v krlo bubble to aayega...jitna bhi costly lgaalo
realme ka battery mi 11x pe laga sakte hain pls batayega
No
After few days later 😁 side bubble 💭💭💭💭
Good
See how he's apply uv temper glass the way he apply
Mainai aaj curved tempered glass lagwaya tha or unnai 15 mins rekha tha merai mobile ko yai UV light machine kai nichai to kya 15 min tak rekhna sahi rhaita hai plzz btado koi merai friend bol rhai jada mins tak rekhdiya usnai ab glue bhott hard hogya hoga.🥲🙏
the uv light isnt working
Sab ke band hai..
Mera bhi
My uv led thing won’t light up 😭
I spoiled 2 tempered glass, guys this don't work
😂😂same here
You can reuse that glass. All you need to clean glass and phone screen with fiber cloth. I fixed it in 4th attempt. Working fine. You must have enough uv paste
Mobile display me pura chipak gaya thaa mera replace karte waqt problem aya blade se nikalna pada
Really ? Kitne din tk use kiye the glass ?
@@ashutoshsahu6997 3 month
Price?
Sir app kaha se hoo
Link share me
Good😮
Uv light hi nahi chal rahi hai
Use high power adapter
BC uv lamp nai chal ra. iske bina stick nai hoga kya?
Use 30w adapter
Uv glass waste don't use it
Oooo
don't buy this crap!!!!! big risk and you can damage the display or the fingerprint reader won't work!! better is a self-adhesive protective glass! that's what I bought and I'm very happy. 👌👍