How to build a weather station that’s WiFi connected - The Byte Sized Engineer | DigiKey
HTML-код
- Опубликовано: 4 дек 2023
- Checking the weather app on my phone is great, but sometimes the data is from a weather station dozens of miles away. I will show you how to get the most accurate weather information by building a WiFi connected weather station right in my own yard. This information can be sent to the National Weather Service, or apps like Weather Underground, or if you’re into home automation and use Home Assistant, it can be used to trigger other automations.
The post How to Build an Internet-Connected Weather Station is live on Maker.
www.digikey.com/en/maker/proj...
Github project
github.com/bytesizedengineeri...
Bill of materials:
Adafruit MS8607 temperature, humidity, and pressure sensor www.digikey.com/short/m80zb8t9
Sparkfun weather meter kit www.digikey.com/short/4c8bz35n
Adafruit ESP32-S2 TFT feather www.digikey.com/short/nqmfzr0p
Terminal Block Breakout FeatherWing www.digikey.com/short/mr4qnrnz
STEMMA QWIIC JST SH cable 200MM www.digikey.com/short/4bm83hqc
RJ-11 vertical connector www.digikey.com/short/7jm7t539
RJ-11 breakout board www.digikey.com/short/jvn3bbt2
10Ah 3.7V Lithium battery Pack www.digikey.com/short/c52wjmvm
USB DC solar universal charger www.digikey.com/short/84qv5p83
5W 5V solar panel www.digikey.com/short/v5r3nh5f
DC barrel jack adapter www.digikey.com/short/8579r89p
PG11 5-10mm nylon cable gland www.digikey.com/short/w52fqm58
8.6" x 6.3" x 3.94" ABS plastic box with hinged door www.digikey.com/short/3pt42f7p
Plastic internal panel www.digikey.com/short/vpzp8p09
JST PH 2 pin cable assembly www.digikey.com/short/10hq3jvv
Byte Sized Engineer channel - / @bytesizedengineering
Maker.io - www.digikey.com/en/maker
Digi-Key’s Blog - TheCircuit www.digikey.com/en/blog
Connect with Digi-Key on Facebook / digikey.electronics
And follow us on Twitter / digikey 
Наука
Just a tip : sensor wiring should enter through the bottom of an enclosure if possible, and always with a drip loop.
Builders describe this as relying on *physics* to keep water out instead of just relying on the *chemistry* of your sealant.
Ow, looks awesome. Thanks!
Good tip! When you install a SpaceX Starlink system, their instructions specify a drip loop too! 😎✌️
Great tip. I installed the temp, pressure, and humidity sensor on the bottom for this reason. I could have done this with the wind vane and anemometer, but I wanted to keep the number of holes through the enclosure to a minimum. The solar panel wire was too short to route through the bottom, so it needed to be on top. I've had it out for several months through torrential rain and it's still dry as a bone inside. I'll have to read more about drip loops, thanks for the tip!
this man is beyond help, he drilled threw a solar panel and he placed it under the contraption he built..... its ok and it will work for a while ...... but its not digikey okey !!! they can do better
What's the data collecting interval here? For example if you collect data every 30 seconds, it means you can probably put the ESP32 module into deep sleep between those intervals and consume less energy that way. Might allow you to account for cloudy days or seasons when days are shorter when the solar panel won't generate that much power.
Does anyone could point me where can I UPLOAD my data to, for free?
I have tried Weather Underground without any luck. I need more options.
Do DigKey have a BOM list where you could just click one link to see the price of everything and then add it all to your basket?
That's a great idea. They definitely should have that for their projects!
Can it be done in a way that data will be send over a mobile data transfer instead of wifi? I need a weather station in remote place without wifi.
Wouldn't you need to have the wind speed and direction sensors above the height of the trees to be accurate?
Only if you want to know the wind speed above the trees...
I'm curious.. if the MS8607 is inside the box.. and it's sealed up water tight.. how are you getting accurate temperature and humidity and air pressure outside the box?
okay.. I see now. you 3d printed a smaller box with air holes and put that on the bottom of your weatherproof enclosure.
I've been trying to figure out a way to measure and report snowfall... any ideas?
Some kind of weighing scale that would allow melt water to drip off?
Where i can buy that ?
Link to Adafruit ESP32-S2 TFT feather is bad
Must have fixed it
👌🙏💯
Your video was fantastic! The content truly deserves more engagement and visibility,but it seems that your videos are currently struggling to gain views.
However, upon review, I noticed that your videos lack optimization, particularly in terms of SEO. Its current SEO score is 30 out of 100! which is lower than standard, hampering its exposure to a broader audience. I'd be thrilled to assist if you're open to it. Let me know your thoughts. Have a great day!