The cable should be long enough (you have to use the 3 wires cable and NOT the 4 one). You should plug the 3 pin connector in the 4 pin socket like this: forum.vkb-sim.pro/download/file.php?id=12521&mode=view If you still have problems please visit our Discord server: discord.gg/UJAdpdHpYm
Help out, please: I think of buying the SEM, but to use with my only VKB NXT Premium (left) apart from each other (the keyboard in-between). How should I connect the SEM to the stick? Does it come with a USB-C to USB-C 40cm cable and both devices have such connector?
The SEM comes with a cable that would help connecting it to a Gladiator NXT or EVO, but the cable is short. It is just a 3 wires cable, so if you plan to use it connected to the NXT, but not physically linked to it you could either extend the cable (DIY it) or get a GNX HID Controller and upgrade the SEM, so it would become an independent USB device that would work without being connected to a Gladiator (vkbcontrollers.com/?product=gnx-thq-usb-controller).
@@uncool005 If you want to run an independent unit (which could be a single module or several modules linked together) you'll need this board, called GNX HID controller vkbcontrollers.com/?product=gnx-thq-usb-controller. This would allow the module(s) to get connected to USB and recognized as a USB device without getting connected to a Gladiator NXT. This board comes with a USB-C to USB-A cable.
3 года назад
Are you guys palnning to release a throttle unit next to Gladiator? If yes, when is the expected launch date?
@@nicobehrndt4650 well they announced it back in like 2019 or something. It’s called the Tecs throttle and vkb hasn’t said much since they normally won’t make an another announcement until they’re ready to ship from what I hear.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
This music makes me think of the group "raisinhill" good stuff
Can the detents be removed from the SEM landing gear and flaps? To make it a fully smooth axis? Will it still have some friction so it does not flop?
Sure, both Landing Gear and Flaps could be used as axes by taking off the detents blocks. You could see here: ruclips.net/video/moj2FOYNNe0/видео.html
@@VKBSim Thank you!
Can the THQ and SEM swap places? Like the SEM is on top and the THQ on the bottom?
Yes, both modules have both a horizontal and a vertical mount version
I'm trying to mount the GNX-SEM on the right side of my left handed omni throttle. The cable is too short. How can I hook up the cable?
The cable should be long enough (you have to use the 3 wires cable and NOT the 4 one). You should plug the 3 pin connector in the 4 pin socket like this: forum.vkb-sim.pro/download/file.php?id=12521&mode=view
If you still have problems please visit our Discord server: discord.gg/UJAdpdHpYm
@@VKBSimI see. I'm able to get it up and running. Thanks!
Help out, please: I think of buying the SEM, but to use with my only VKB NXT Premium (left) apart from each other (the keyboard in-between). How should I connect the SEM to the stick? Does it come with a USB-C to USB-C 40cm cable and both devices have such connector?
The SEM comes with a cable that would help connecting it to a Gladiator NXT or EVO, but the cable is short. It is just a 3 wires cable, so if you plan to use it connected to the NXT, but not physically linked to it you could either extend the cable (DIY it) or get a GNX HID Controller and upgrade the SEM, so it would become an independent USB device that would work without being connected to a Gladiator (vkbcontrollers.com/?product=gnx-thq-usb-controller).
Error: "simultaneous usage spi2(s-led mode) and usart1 is prohibited!!!" How to fix?
My gladiator NXT Evo doesn't have a 3 pin port. I connected a 4 pin to 4 pin instead and will report my results!
Are these modules compatible with the gladiator k?
You can't interconnect them with the Gladiator MKII/K, but you could run them independently at its side.
@@VKBSim thank you for the prompt reply! Are these provided with a usb A cable ?
@@uncool005 If you want to run an independent unit (which could be a single module or several modules linked together) you'll need this board, called GNX HID controller vkbcontrollers.com/?product=gnx-thq-usb-controller. This would allow the module(s) to get connected to USB and recognized as a USB device without getting connected to a Gladiator NXT. This board comes with a USB-C to USB-A cable.
Are you guys palnning to release a throttle unit next to Gladiator? If yes, when is the expected launch date?
They are. It’s supposed to be released soon but they haven’t given a date or any kind of update yet.
Good to know that they are releasing a throttle unit. Planning to get the gladiator unit and was looking for a throttle unit.
@@wolfninja1376 Did you read that somewhere? In there news section is nothing...
@@nicobehrndt4650 well they announced it back in like 2019 or something. It’s called the Tecs throttle and vkb hasn’t said much since they normally won’t make an another announcement until they’re ready to ship from what I hear.
@@wolfninja1376 Thx for the answer! You mean this thing: ruclips.net/video/Sv_2-Z-Xneo/видео.html ?