WOW!!! Hang on a minute. Let me watch this again. You talk about things that were long forgotten since I left school. It's time to bring them back into my memory. Thank you for that!!!
I was recently hired (without heavy or proficient eduction) as a FOH engineer because my mix was good, I was running into issues out of my understanding. This video gave me a great sense of direction on where to start!
Wow, I'm trying to learn EQ from start and you did a good work in making me understand it. Who else pulled out their earphones at that high pitched noise?
See that's why the theory is important, I was using my eyes, I could tell the width of the snare was Increasing around there, but instead of lifting it higher, I tried to go wider, because that was common sense to me, but I was boosting more frequencies, rather than the necessary one. Thank you for that 🙏
Recently started learning about EQ because I need to learn how to fix bad audio in general - both on my headphones and recordings. Also as a gamer, I'd like to learn the basics of audio to cut out explosions and other distracting noises in games like Call of Duty, and to focus on important audio like footsteps and character dialogue. My headset is cheap as well, so I'm trying to get the best audio i can from it. What better way than to learn the basics of EQ! Another person with a photography background, like myself, did say that EQ and photography are very similar, and i could definitely agree. With both, you have to cut out unnecessary things, then boost certain desired aspects to make the end product pleasing.
It's fine to boost frequencies like this, but it's far more common to CUT specific harmonics when mixing, when those harmonics are overbearing, or combine with harmonics from other instruments to cause problems in the mix.
Hello, can I ask, my headphone has 5hz-50khz frequency response. So, technically when listening music, the frequency response of songs will depend on the song’s frequency range or like most of the songs have frequency range between 20hz-20khz?
It's taken me forever to understand how a frequency range measures each instrument in a track. Also the Sine waves was another mystery. Most importantly to understand which instrument the frequency range is measuring along that graph. Not sure though how to Isolate a particular instrument out of several instruments. Does a graph measure just one instrument or several instruments at the same time? Many thanks for such an informative film.
I have these frequency options to adjust on my AVR; 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz Voices sound a bit thin/ harsh and lack depth. Can you recommend what I might try using these options?
Hi Gregory, thanks for the input, we have added that to the description. You can check it out here 👉 www.sweetwater.com/insync/music-instrument-frequency-cheatsheet/?RUclips&Referral&PAqLdnA7-0
Very informative, just wanted to learn how I can use my EQ better since I don't know much about it all and kind of got struck with curiosity so I ended up watching it all and learned a fair bit haha #edit the square wave and what it is, also how they are created blew my mind, it's so logical yet I never thought about it.
In the real world there are frequencies going up way pasts 20Khz , but your typical audio gear is 20-40hz on the low end and 20K-30K on the high end. This is why a band or piece of gear that sounds great live sounds different in the studio. In the real world the frequencies above our hearing range are bouncing around the room affecting the sounds we do hear, but the mics, interfaces, recording gear, all only capturing the 20-20K of sound. This is why in the studio you start overdubbing other instruments and sounds and mix them down low to help fatten up the recording. This is also why your studio that has too much sound deadening on the walls and ceiling the recordings sound sterile. Also when EQ'ing many go through each track one by one EQ'ing to make that track sound full. But then they listen to all the tracks together and the sound sucks. It's because you boosted the same frequency on multiple tracks and now hearing everything all that boosting is adding up to over boost that frequency. So when mixing and EQ'ing you have to think about the song as whole and be sparing in how much you EQ each track. Always have to think about the whole mix not only EQ but reverbs and other effects they all add up in the final mix.
Hello, can I ask, my headphone has 5hz-50khz frequency response. So, technically when listening music, the frequency response of songs will depend on the song’s frequency range or like most of the songs have frequency range between 20hz-20khz?
Thanks for watching! Be sure to like and subscribe so you don’t miss out on future videos like this one!
WOW!!! Hang on a minute. Let me watch this again. You talk about things that were long forgotten since I left school. It's time to bring them back into my memory. Thank you for that!!!
Man I said the exact same thing!
same here
I was recently hired (without heavy or proficient eduction) as a FOH engineer because my mix was good, I was running into issues out of my understanding. This video gave me a great sense of direction on where to start!
Thankyou Jacob and thankyou Sweetwater !!
The best in the business !!
Wow, I'm trying to learn EQ from start and you did a good work in making me understand it.
Who else pulled out their earphones at that high pitched noise?
See that's why the theory is important, I was using my eyes, I could tell the width of the snare was Increasing around there, but instead of lifting it higher, I tried to go wider, because that was common sense to me, but I was boosting more frequencies, rather than the necessary one. Thank you for that 🙏
Yes please I want more content like this
🙂..
Recently started learning about EQ because I need to learn how to fix bad audio in general - both on my headphones and recordings. Also as a gamer, I'd like to learn the basics of audio to cut out explosions and other distracting noises in games like Call of Duty, and to focus on important audio like footsteps and character dialogue. My headset is cheap as well, so I'm trying to get the best audio i can from it. What better way than to learn the basics of EQ!
Another person with a photography background, like myself, did say that EQ and photography are very similar, and i could definitely agree. With both, you have to cut out unnecessary things, then boost certain desired aspects to make the end product pleasing.
Loved it! A few more videos like this and you won't need to go to any music school :-)
It's fine to boost frequencies like this, but it's far more common to CUT specific harmonics when mixing, when those harmonics are overbearing, or combine with harmonics from other instruments to cause problems in the mix.
Hello, can I ask, my headphone has 5hz-50khz frequency response. So, technically when listening music, the frequency response of songs will depend on the song’s frequency range or like most of the songs have frequency range between 20hz-20khz?
Great video and the cheat sheet is so handy. Thank you!
It's taken me forever to understand how a frequency range measures each instrument in a track. Also the Sine waves was another mystery. Most importantly to understand which instrument the frequency range is measuring along that graph. Not sure though how to Isolate a particular instrument out of several instruments. Does a graph measure just one instrument or several instruments at the same time? Many thanks for such an informative film.
This was awsome,thank you! Please make a video for vocals .
awesome content
Great topic!
Yeeeeees!!! This is the video I needed! Thanks!
Brilliant! Thank you, Sir!
Good video. Great shirt. I must own one.
WONDERFUL INFORMATION THANK YOU SO MUCH.
Thank you ♡♡♡
Mindblown
❤🎉🎉🎉🎉
Curious if we kinda clean / clear the wax from our ears if it will improve hearing , given it deteriorates as we age ?
You were awesome in the Mandalorian
just what I needed thank you so much.
Thank you! Very informative!!!
Oh im subscribed brother yezzir i definitely find this interesting to be in the audio world.... Thanks so much 👀🤙🏽👍🏾💪🏾
This was great, more please
Very cool video!
I have these frequency options to adjust on my AVR;
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Voices sound a bit thin/ harsh and lack depth. Can you recommend what I might try using these options?
Great video, even better shirt!
@Sweetwater 6:22 It would be helpful if you provided a link to that frequency cheat sheet!
Hi Gregory, thanks for the input, we have added that to the description. You can check it out here 👉 www.sweetwater.com/insync/music-instrument-frequency-cheatsheet/?RUclips&Referral&PAqLdnA7-0
Good stuff
I really like his shirt, I didn’t get it until I looked closely, pretty clever! 😅
hold up if you play 4:07 - 4:17 at 1.75x speed it sounds like the beginning of shoes by kelly
Very informative, just wanted to learn how I can use my EQ better since I don't know much about it all and kind of got struck with curiosity so I ended up watching it all and learned a fair bit haha
#edit the square wave and what it is, also how they are created blew my mind, it's so logical yet I never thought about it.
👍 thanks
So in simplest terms, faster sound = higher pitch?
Sweetwater Music frequency Cheat sheet link
Please ?
Proper air mixture?
Hi Mike, you can check it out here 👉 www.sweetwater.com/insync/music-instrument-frequency-cheatsheet/?RUclips&Referral&PAqLdnA7-0
So l heard if doing brain retraining or healing frequency you won't get it correctly on utube ..
i kind of heard the very low tone what hz was it
In the real world there are frequencies going up way pasts 20Khz , but your typical audio gear is 20-40hz on the low end and 20K-30K on the high end. This is why a band or piece of gear that sounds great live sounds different in the studio. In the real world the frequencies above our hearing range are bouncing around the room affecting the sounds we do hear, but the mics, interfaces, recording gear, all only capturing the 20-20K of sound. This is why in the studio you start overdubbing other instruments and sounds and mix them down low to help fatten up the recording. This is also why your studio that has too much sound deadening on the walls and ceiling the recordings sound sterile.
Also when EQ'ing many go through each track one by one EQ'ing to make that track sound full. But then they listen to all the tracks together and the sound sucks. It's because you boosted the same frequency on multiple tracks and now hearing everything all that boosting is adding up to over boost that frequency. So when mixing and EQ'ing you have to think about the song as whole and be sparing in how much you EQ each track. Always have to think about the whole mix not only EQ but reverbs and other effects they all add up in the final mix.
Hello, can I ask, my headphone has 5hz-50khz frequency response. So, technically when listening music, the frequency response of songs will depend on the song’s frequency range or like most of the songs have frequency range between 20hz-20khz?
Clark Laura Perez Margaret Taylor Gary
Where’s that cheat sheet ?
I still don’t get it😔I’m tryna be better at mixing but I’m gonna get it watch
That bothered my soul listening to that!
20k to 6k is not a little bit...
I guess to 11-13khz
It's Important you do these videos thank you. Subscribe people and like these videos. Wonderful channel
Oh Kewl... a video I can "relate" to ;-) Really...It's about time
Yeah, im still missing it..anything more basic to build up to the "science" ?
You here only talk about snare eq , only and only and only😨