Does the hub connect to a pwm fan control on mobo or just a normal 3pin sys_fan header? Looking to buy this today as its on a really good BF sale of 41£
Looks like a great case. Four fans included so you don't have to buy extra fans. Corsair only includes two with their 4000D and that one is more expensive.
It's a shame how many times in our lives we Aussies have to use "shame" and "Australia" in sentences. Left 4 Dead Gore.. Internet.. Elder Scrolls Online.. Any US based game launch times.. you get the point..
What gpu do you have or planning to get? The max length you can fit a gpu is 12.9 inches (330 mm without the 360mm aio) and my gpu is 11.06 inches (281.00 mm). To make sure, I would make sure the gpu is around 280mm (maybe 290mm) so that you can fit everything. Also the height of your card since mines is 2 slots and it fits fine.
OH MY GOD THANK YOU ! I was losing my mind over those fucking mobo screws ! First time building a PC and knowing you a bit through some videos I've watched already, I knew you'd have something to say about it. The SSD screws work perfectly fine, thank you as well for pointing it out !
i bought this case a bit over a month a go and i was skeptical since i had not heard of the brad prior....my overall thoughts on the case is that it is well built and comes with a lot of features that more expensive cases dont have...i also removed the bottom drive cage since all i use now is M.2 drives...i like the hinged glass door and the handle on it feels good knowing the glass panel wont drop when taking it off...other panels once you unscrew the glass panel might drop...didnt like the rear PCI-E either...my only complaint is with customer service from montech....then sent me the wrong color case 2 times and blamed it on newegg when they infact were the ones shipping the case...i sent the first case back to newegg as a return only since montech would send the 2nd case from their warehouse...2nd case came wrong color again...finally got the right color and found out newegg refunded my money so this case was free....this was a garage PC so nothing fancy...specs are....Asrock B560 steel legend...i5 11400...cooler master Hyper 212 RGB black...650w Superflower,,,970 evo plus 1TB...16gigs Siliconpower RGB...old XFX R9 280x...
@@samsunneher8534 a majority of cases i use are phanteks and Lian Li and the quality of this case is just as good as them...its already been through 2 summers in vegas in my garage with 100+ temps in garage and all the fans still work and RGB is fine...had some corsair fans in last garage PC that only lasted 1 summer..even the fans are good quality from montech
I don't know why they don't standardize the motherboard stand off screws . Nothing worse than having them stuck in the standoffs when the threads are wrong ...
Got the Lite model and easy to build in. Top fan screws suck but the airflow is awesome. I moved the front fans to the inside of the chassis and I have the same cpu thermals as I did with an open bench setup. I have a massive Thermlright Frost Commander 140 but it starves for no air in this case. Hour long torture test with 72 C max with a 160W load on an i7-9700. Don't remember if I seen it in video but there are spots for the two SSD on the top of power supply shroud if you want to show off SSD.
@@samsunneher8534 the material is fine. Paint was even, no rough edges on the metal or glass. Not the heaviest in the world but plenty sturdy with no flex.
Bought the Montech Air X ARGB case in the color of black and received it two days ago. I must say I do like the front mesh design of it and the fact it has two 200mm fans in the front. How ever I think the fans in the case are junk the fans bushing/bearing sounds dirty. I reached out to Montech company to see what they can do for me and sent them my invoice as proof I bought the case. But I believe I will just have to bite the bullet and just buy couple good quality 200mm fans but that will cost nearly $100 dollars.
I know that in the spec it say max 240mm on top and 280mm aio on front, but can it mount 280mm on and 360mm aio on front? If can, it woul really help with the cooling.
I got this case and set it all up and the fans light up but don’t spin, I’ve tried so many things but can’t figure out how to do it. Can anyone give me any ideasv
Hey I recently finished a build with this but I can’t get the argb to work, it just won’t light up. I connected the argb input wire to the jrainbow1 header on my B550 pro vdh Wi-Fi motherboard but it won’t work. Any tips??
@@lucasr9485 got this same problem where do I plug in the 3 pin white connector? Do I need an adapter to plug in to a 4 pin USB connector? And my MB, a gigabyte b550m has a sys fan connector, what plugs into it? Any help in detail greatly appreciated bcuz the manual for it is worthless. Thank you
Hey I know this is old but my case is stuck on the rainbow mode and I have absolutely no idea how to change them. I’ve tried holding the reset button for many combinations and I see no indication that anything’s changed. Please help. Thank you
@@xavierzamora5318 yep, just ended up turning the rgb off altogether because the rainbow mode is so tacky looking. I’ll probably come back to try and fix it at some point and if I do I’ll let you know
Hi, this case is amazing even now 2 years later. But its bit expensive now. Here in Finland is 69 euro. I was wondering wich one to choose between Lian li lancool 205 mesh and this one. Don't no why, but this one looks better to me. I'm looking white versions.
@kitgurutech just a question, the s24 prism is a 240mm but as per checking the radiator size is 284x122x31 mm, that's correct, right? How'd you fit that in the case?
Would have loved to fit a 320mm GPU and a radiator in the front, but if you can afford these high end parts you can prob consider a more expensive case too
Awesome video. But I was wondering with what washer size do you need for top aio radiator? Plus would i be needing the same washers if i were to put just case fans above?
Does that handle lock the door when pressed down, or is it just secured by magnets? Hinged glass doors without a physical latch of some kind are kinda unacceptable in my eyes. It's genuinely a safety hazard any time you need to move the PC around around.
No, the plastic gizmo is so you have something to hold on to. The magnets seems perfectly OK however there is no positive lock to guarantee the glass remains closed.
ive ordered this eact case, just wondering, im a noob btw, that big massive cooler for the top? do i need one of those or is just a fan on the cpu fine? thanks
he didn't I don't think...he didn't realize that the case's reset switch comes plugged into the argb hub. If you want argb to be controlled by motherboard you need to unplug the reset switch from the hub
Damn, I need to get on the ball and finish up my video on this case. It is a real nice case. I have the lite version in white but haven't got to the build yet because I've been busy doing some renovations in my basement.
What is really annoying for me is that the rear fan just has really low led volume, all other fans work perfectly fine, but the fan itself in terms of airflow is fine, don't know if I have to send it back.
i just got the raidmax x616 for 69 bucks and its alittle bit better quality and comes with 2 front fans that are 200mm and one back fan and its full atx case i love it honestly the air flow and temps are amazing but i think anything with mesh no matter what quality is pretty beast id say.
so you're going to turn down a remarkable little case just because there's some words? Components are riddled with logos and branding and slogans and all that shit, but the case is a bridge too far? Seems a little excessive. With the money you save from the case because a great price, how about buy a bottle of acetone and just rub the bloody words off?
@@rossclutterbuck1060 That's why I don't buy ASUS ROG stuff. Too many in your face branding. So yeah, I will pass on it, because there are dozens of other case in this price range that don't have those kind of in your face branding. It's not like I don't have options.
i had the silverstone gd09 and its ugly fat. i got fractal meshify 2 that cost me £150 and the tempard glass smashed on it. im now looking for a smaller case and white. do u suggest anything? i have gtx 1070 gpu so length of 11 inches and i also use MATX motherboard and hate using cases not dedicated for that size as it makes the case bigger.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
This is why I love this channel! Leo can make the simplest of reviews so riveting!
Damn, that does look very impressive for the price point. Quite fancy building a PC in one of these with my nephews.
These lesser known brands always making the best cases ever.
Holding down the reset button for 3 secs puts the argb into motherboard mode.
What is motherboard mode?
@@QuestForGoodyou can control the RGB from the motherboard, rather than just the set colours from the pre-installed RGB controller.
@@Crawf876 Ah I understand what you mean now. I assume, I need to download sort sort of rgb software for my motherboard?
@@QuestForGoodyes, I have an ASUS motherboard, so use ASUS armoury crate.
Does the hub connect to a pwm fan control on mobo or just a normal 3pin sys_fan header? Looking to buy this today as its on a really good BF sale of 41£
Looks like a great case. Four fans included so you don't have to buy extra fans. Corsair only includes two with their 4000D and that one is more expensive.
Exactly and the fans dont even match the colors of the case too.
Amazing review! I loved made me choose this case for my first gaming setup! Thank you very much, cheers from Brazil!
Very impressive cases, nice review KitGuru and good work Montech.
Brilliant video review on a brilliant RUclips channel. Always spot on comprehensive reviews & builds. 👍
Shame they don't sell in Australia. Looks like a great option for budget airflow.
It's a shame how many times in our lives we Aussies have to use "shame" and "Australia" in sentences.
Left 4 Dead Gore.. Internet.. Elder Scrolls Online.. Any US based game launch times.. you get the point..
@@andystovell it not that deep
Thanks for the review. Love from BR 🇧🇷 👍
If you hurry, you can buy it for R$ 269 at Terabyte. I just bought mine.
For those wondering, the case can actually fit a 360mm aio in the front. I tried it with my nzxt x73 and it has just enough room to fit it in.
What gpu do you have? And how much room do you have for the gpu?
I have an asrock 5700xt challenger and still have some room left. I put the fans in the front and the radiator behind.
@@cmike1942 this is wonderful news. Thank you for replying!
@@cmike1942 do you think the 3x fan would fit?
What gpu do you have or planning to get? The max length you can fit a gpu is 12.9 inches (330 mm without the 360mm aio) and my gpu is 11.06 inches (281.00 mm). To make sure, I would make sure the gpu is around 280mm (maybe 290mm) so that you can fit everything. Also the height of your card since mines is 2 slots and it fits fine.
OH MY GOD THANK YOU ! I was losing my mind over those fucking mobo screws !
First time building a PC and knowing you a bit through some videos I've watched already, I knew you'd have something to say about it.
The SSD screws work perfectly fine, thank you as well for pointing it out !
Please may you explain how to press the reset button to switch to motherboard control mode on this case
"Do it! It'll make me happy!" *Leo smile* Video was WELL worth it just for that few seconds LUL
NO NONSENSE REVIEW. GOTTA LOVE IT
excellent review for a pretty awesome case
i bought this case a bit over a month a go and i was skeptical since i had not heard of the brad prior....my overall thoughts on the case is that it is well built and comes with a lot of features that more expensive cases dont have...i also removed the bottom drive cage since all i use now is M.2 drives...i like the hinged glass door and the handle on it feels good knowing the glass panel wont drop when taking it off...other panels once you unscrew the glass panel might drop...didnt like the rear PCI-E either...my only complaint is with customer service from montech....then sent me the wrong color case 2 times and blamed it on newegg when they infact were the ones shipping the case...i sent the first case back to newegg as a return only since montech would send the 2nd case from their warehouse...2nd case came wrong color again...finally got the right color and found out newegg refunded my money so this case was free....this was a garage PC so nothing fancy...specs are....Asrock B560 steel legend...i5 11400...cooler master Hyper 212 RGB black...650w Superflower,,,970 evo plus 1TB...16gigs Siliconpower RGB...old XFX R9 280x...
hi , if your from the uk , where did you buy this case?
@@bartwolczyk981 im in the states and bought it from newegg
Hey how is the material quality of this case? Is it good enough compare to other case's like deepcool at this price point?
@@samsunneher8534 a majority of cases i use are phanteks and Lian Li and the quality of this case is just as good as them...its already been through 2 summers in vegas in my garage with 100+ temps in garage and all the fans still work and RGB is fine...had some corsair fans in last garage PC that only lasted 1 summer..even the fans are good quality from montech
@@mercflf8 so you are telling that the sheet and the material quality feels like premium and sturdy?
Will a 160 mm full modular power supply fit without removing the drive bay?
I've built PC's in three different Montech cases. They are great for budget builds.
Are the material quality good enough compare to deepcool macube 110?
How do you know when you've entered argb control mode from the case button?
If you install 2x 140mm fans on the front what does it looks like?
Cannot find a link on where to buy. Montech's own website suggests Amazon UK, but searching for the item brings no (matching) results. 🙄
Yeah same here can't find it in UK anywhere 😕
Amazon Germany sells lite for £65 ISH and the argb for £75 ISH.
thank you for explaining the argb, couldnt find anything about it...
Thanks for review.
Reset button does not change my RGB light settings. What do I do? All connections seem fine.
Can you put 360 radiator in front? i have this and wanting to buy Aorus 360. i think it has space? 🤔
About 80 USD for the black one, and 100 USD for the white one here in Brazil.
Seems like an alright budget case. Thumbs up.
If you don't have an (A)rgb motherboard will the fans still have colours?
hello what is the difference between this case and the montech air 100 lite?
I don't know why they don't standardize the motherboard stand off screws . Nothing worse than having them stuck in the standoffs when the threads are wrong ...
Got the Lite model and easy to build in. Top fan screws suck but the airflow is awesome. I moved the front fans to the inside of the chassis and I have the same cpu thermals as I did with an open bench setup. I have a massive Thermlright Frost Commander 140 but it starves for no air in this case. Hour long torture test with 72 C max with a 160W load on an i7-9700. Don't remember if I seen it in video but there are spots for the two SSD on the top of power supply shroud if you want to show off SSD.
How is the material quality of your case?
@@samsunneher8534 the material is fine. Paint was even, no rough edges on the metal or glass. Not the heaviest in the world but plenty sturdy with no flex.
Nice to see budget cases are actually budget priced, attainable and well priced again. But more importantly, where's Rosie?
I got one today and am having problems with the fans not spinning but the rgb is on, what could be the problem? (its plugged into sata)
Bought the Montech Air X ARGB case in the color of black and received it two days ago. I must say I do like the front mesh design of it and the fact it has two 200mm fans in the front. How ever I think the fans in the case are junk the fans bushing/bearing sounds dirty.
I reached out to Montech company to see what they can do for me and sent them my invoice as proof I bought the case. But I believe I will just have to bite the bullet and just buy couple good quality 200mm fans but that will cost nearly $100 dollars.
Does anyone have any information on where I can buy this now? I can't find anywhere where it is available in the UK
It's available in scan computer.
Do you have guide how to install the SSD 2.5" mount to the side of the case? I pretty confuse about that.
They are regular SSD mounts. Undo the thumbscrew and remove the mount from the case. Install the SSD with four screws and reinstall the SSD mount.
This case is so clean
I know that in the spec it say max 240mm on top and 280mm aio on front, but can it mount 280mm on and 360mm aio on front? If can, it woul really help with the cooling.
Can the light button control 240mm aio rgb if you connect it to rgb hub
I got this case and set it all up and the fans light up but don’t spin, I’ve tried so many things but can’t figure out how to do it. Can anyone give me any ideasv
I could watch Leo shovel shit for half an hour ! As long as he is talking ! ha ha !
look at the Silverstone fara H1M, is a small m-atx case, like this
Does this mainboard have a small gap connected to the case? The io shield doesn't seem fit to the case
I really want to buy a montech air 100, but I don't know if my rm1000x wil fit in it. I also have a hx1000i but its the same size I think.
Hey I recently finished a build with this but I can’t get the argb to work, it just won’t light up. I connected the argb input wire to the jrainbow1 header on my B550 pro vdh Wi-Fi motherboard but it won’t work. Any tips??
did you fix it?
I would love to see a comparison of This case against the NR400 from Cooler Master
How is the material quality of this case? Is this case sturdy?
can i use arctic p12 argb fans and use it on the montech hub?
Can someone please explain how can I control the ARGB fans with the motherboard software (in this case, Aorus Fusion 2.0)? Thank you.
Regarding the Standoff issue... Thank god I'm not the only one who has to deal with it! It's especially bad on the NZXT cases
Can I set the pre installed fan’s colours from the motherboard?
This or the new CH360 by DeepCool? They are very similar, I/O aside.?
I'm having issues with the fans not spinning I tried figuring out why and where is the wire to power the fans
@@khaoz7628 I found out that the 3 pin connector from the fans should be connected to the system fan pins despite it having 4 pins on the motherboard.
@@Ten0_YT so then how would it plug in if there’s one pin missing from the fan headers, because I’m trying it right now and it’s not plugging in
@@lucasr9485 got this same problem where do I plug in the 3 pin white connector? Do I need an adapter to plug in to a 4 pin USB connector? And my MB, a gigabyte b550m has a sys fan connector, what plugs into it? Any help in detail greatly appreciated bcuz the manual for it is worthless. Thank you
Hey I know this is old but my case is stuck on the rainbow mode and I have absolutely no idea how to change them. I’ve tried holding the reset button for many combinations and I see no indication that anything’s changed. Please help. Thank you
Did you ever figure this out or no bc I’m having the same problem rn
@@xavierzamora5318 nope :(
Damn
@@xavierzamora5318 yep, just ended up turning the rgb off altogether because the rainbow mode is so tacky looking. I’ll probably come back to try and fix it at some point and if I do I’ll let you know
@@favraybro lo solucionaste????
How do you change the colour of rgb fans on the case?
Have the same case but my led isn’t on but the fan is spinning
If HDD tray removed, could we install 18cm PSU?
Hi, this case is amazing even now 2 years later. But its bit expensive now. Here in Finland is 69 euro. I was wondering wich one to choose between Lian li lancool 205 mesh and this one. Don't no why, but this one looks better to me. I'm looking white versions.
Hi, what did you choose in the end?
@teleshvoo99 Hi, if I have to be honest, I try both. Lian li is a much better case in every aspect.
@@KPCflipping Thank you for your answer =)
this makes me regret hunting down a left over darkflash DLM21 MESH WHITE
Can this case fans be controlled by software
hi , where did you purchase this case , thank you
@kitgurutech just a question, the s24 prism is a 240mm but as per checking the radiator size is 284x122x31 mm, that's correct, right? How'd you fit that in the case?
Can the rad be mounted up front?
Would have loved to fit a 320mm GPU and a radiator in the front, but if you can afford these high end parts you can prob consider a more expensive case too
Awesome video. But I was wondering with what washer size do you need for top aio radiator? Plus would i be needing the same washers if i were to put just case fans above?
Aura sync compatiable?
Does that handle lock the door when pressed down, or is it just secured by magnets? Hinged glass doors without a physical latch of some kind are kinda unacceptable in my eyes. It's genuinely a safety hazard any time you need to move the PC around around.
No, the plastic gizmo is so you have something to hold on to. The magnets seems perfectly OK however there is no positive lock to guarantee the glass remains closed.
Is it compitable with xfx 6950 xt 319?
ive ordered this eact case, just wondering, im a noob btw, that big massive cooler for the top? do i need one of those or is just a fan on the cpu fine? thanks
I live in the US and I can't find it here.
Just got a Deepcool Matrexx 40 for $49.99
I heard some people need to break the PCI Cover to fit their GPU, is that true?
It's true for majority of budget cases.
Are the DC fans loud?
Ur such a nice guy and probs gonna buy it
can I fit a 340mm gpu in there?
jlab audio epic air sport anc
1More EHD9001TA
Sony WF-SP800N
Jabra active elite 75t
Which of these has better sound quality?
So how did you put the fans into MOBO mode
he didn't I don't think...he didn't realize that the case's reset switch comes plugged into the argb hub. If you want argb to be controlled by motherboard you need to unplug the reset switch from the hub
Here in Philippines you can actually get it for 34 pounds including shipping. I got it from Lazada shop.
same, got this for my first build and I'm still smiling everytime I look at it
In detail review as always!
One question - Is there any way that you can take the plastic handle off from the side panel?
Yes you can, forcefully. Problem is if you remove it, it'll be impossible to open the case
The front mesh comes out too easily?
Try pushing to secure it in place
where can i buy this, it looks great!
where do you live?
@@KitGuruTech i live on the east coast/america
Damn, I need to get on the ball and finish up my video on this case. It is a real nice case. I have the lite version in white but haven't got to the build yet because I've been busy doing some renovations in my basement.
with pwm it would be very good
Got it on Amazon for $80 , out of so many good reviews I guess the price had went up 🙏but shit I don’t really care haha
that's a sapphire card? looks exactly like my reference card straight from AMD
where is Rosie ???
What is really annoying for me is that the rear fan just has really low led volume, all other fans work perfectly fine, but the fan itself in terms of airflow is fine, don't know if I have to send it back.
Just built my girlfriend a PC in this case and it's awesome :)
Is leo the owner of this channel?
i just got the raidmax x616 for 69 bucks and its alittle bit better quality and comes with 2 front fans that are 200mm and one back fan and its full atx case i love it honestly the air flow and temps are amazing but i think anything with mesh no matter what quality is pretty beast id say.
With a swigging door? That's dirt cheap.
Looks similar to Gamemax aero mini...
Leo here: I hadn't previously seen that model but now you mention it they clearly have a huge amount in common. Nice spot.
Can someone who lives in west Pembroke Pines Florida help me build mine, I’m scared 🫠
dude seems like hate and love his job at the same time lmao
Pensei que ia destruir o gabinete🤣🤣🤣
this is now a $75 case lol
feelbad it $46 here
$99 now
PASS... Not a fan of that large branding on the shroud
so you're going to turn down a remarkable little case just because there's some words? Components are riddled with logos and branding and slogans and all that shit, but the case is a bridge too far? Seems a little excessive. With the money you save from the case because a great price, how about buy a bottle of acetone and just rub the bloody words off?
I agree. I watched this wondering how many people wont buy it because of the oversized logo.
@@rossclutterbuck1060 people who are interested in tempered glass and rgb are very likely to be in interested in other aesthetics
@@rossclutterbuck1060 That's why I don't buy ASUS ROG stuff. Too many in your face branding. So yeah, I will pass on it, because there are dozens of other case in this price range that don't have those kind of in your face branding. It's not like I don't have options.
i had the silverstone gd09 and its ugly fat. i got fractal meshify 2 that cost me £150 and the tempard glass smashed on it. im now looking for a smaller case and white. do u suggest anything? i have gtx 1070 gpu so length of 11 inches and i also use MATX motherboard and hate using cases not dedicated for that size as it makes the case bigger.