* REWA Academy Training Book PRE-SALE of iPhone motherboard repair available now! Do not lose the opportunity to get limited systematic REWA training treasure (1000 limited stock for pre-sale). > bit.ly/31I5Nks
I now.. really believe that after watching every step in this video, taking in every bit of detail, watching it back 11 times, making sure I don’t miss a single thing, really think I should just buy a new iPhone :)
I have had an issue with my iphone x after replacing my screen, i was struggling for months no fault no where. I put my iphone into DFU mode a deeper process than a actual factory reset and it worked. it will restore your phone and download the current ios again. Not sure if it will work for everyone but it definitely worked for me.
I somehow come across this video while waiting for my soldering station to come, and when it does... I GOT MY FACE ID BACKK BABYY!!! THANKYOUUU FOR GUIDANCE
Thank you for this important information. I would like to ask if it is common for the FACE ID to malfunction? What can cause the FACE ID to malfunction? Greetings and thank you very much
for me face ID sometimes stops working when there is an IOS update that i need to do. or for some reason i need to reboot. Then it starts working again.. but during the or after the december 2022 updates.. as of now, it is still not working.
Thanks for the video, the old ambient light sensor needs to be on the new flex cable or I can just replace the flood illuminator? Because I've already have it in the new flex cable
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore it also should be the original one. Thanks for watching :)
Hi @REWA TECHNOLOGY !! Thanks !! Three questions 1- wich is the temp and airflow on hot air gun 2- wich is the temp on soldering iron 3-when you place the flood thing on the new flex , you already Tin the pads on the flex only ? Or the flood thing too ? Or just on the flex ? Thanks you rocks keep helping community 😘
Hi Hernan. Thanks for the comment. 1. We applied 240℃ Celsius with our heat gun. 2. The temperature of Soldering Iron is about 330℃~350℃ Celsius. 3. The Flood Illuminator Module we used is a new one, so we do not need to tin the pads.
REWA Technology ahh i though the module was linked to the board , it’s not linked ? You use a new one ? Or you meant the flex is new ? Thanks for all you do to the community !! 😘😘
Hernan Narcisi You have to use the same Flood Illuminator to get the FaceID working properly. What he broke was the flex, so basically he took the original flood illuminator and put it in a new flex. Only people that I know that use different flood illuminators are Apple guys, their screens come with the whole front thing, they program it for the iPhone that it’ll use and let it go 👌🏻
Just helping to answer your question. No, you can't because the flex cable has a specific code to the motherboard. This one is similar like when you demage your touch ID flex cable in iphone 5s, you can not repalce it with another flex cable. But you need to fix the demage one.
Hello for this to work do you need to transfer the flood illuminator module or can you use new flex with generic module? The ear speaker has to be the original correct? Please reply as soon as possible please?????
I see a lot of videos from your company. But i see a thing that alerts me. Why in the minute 10:28 i see a diffused screen overlay? I don't want to say it's a fake. Because your works are exceptional. Be aware with this things because they can say its false
hello, I watched with admiration of your work, congratulations I did a wonderful job. I send you you made the repair repair FaceID from turkey? and what is the cost of this repair? request information.
Hello Sir, thanks for this amazing help i have an issue with my Face id on iPhone X the problem is it keeps saying (move your head a little higher/ position your face inside the square) but nothing happens after i checked the 2 dots and they are there and working, i checked the flood illuminator by calling and the screen went black which means it's also working, i checked the portrait for the front camera and it also worked, everything in the phone works perfectly, but i should mention that the Display is Damaged and contains a green lines from the left side, could that be a reason for why the face id isn't working, or just my face id died and that's it?
hi rewa..exactly same issue (flex cable damage ) for me…will this video alone works or i need to transfer or copy face id values to the new cable ?…does the value stored in flex cable or original face id components?
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one. If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable. Hope it can be helpful for you :)
hello always follows your videos. i managed to repair an iphone x face id but i have a problem it takes the configuration after fixing it but it does not unlock you can help me thanks
Nossa é outro nível, o cara é super profissional, vou aumentar o o meu nível de conhecimento, pena que o dólar estar muito alto, mais temos que fazer um investimento alto.
Hello sir @REWA Technology, excuse me i have the same problem too, i already swapped the new one flex cable. But after that scan face id fixed, auto brightness also fixed, proximity good and the problem when i am going to unlock the lockscreen face id cannot working. Have the solution for fixing this case?
REWA, would the aftermarket screen affect the Face ID, without any rips on the cables? And do we also need to remove the Face ID before the replacement?
ihsan gene The only thing that you need is to get your original earpiece without broken it and then install it with your new aftermarket screen. Also you don’t have to remove yours Face ID 👌🏻
Hello I bought an entire flex cable/ear piece/flood light sensor part from ebay, it had all of the components already attached. After installing it in the customers phone the FACE ID does not work. Is this a software issue that a DFU restore would repair?
Hello, this is not a software issue and a DFU restore cannot solve the problem. Please be noted that the flex cable of FACE ID is paired to the motherboard inside the iPhone. The replacement can cause the Face ID failure as you mentioned.
Hello, When i try to remove the flood illuminator from the flex cable the plastic begins to melt before I can unsolder it. If I lower the temperature I can't unsolder it. I don't understand.
REWA Technology what if I bought a ear speaker that comes with all the sensors and I replace that flood illuminator with the original one. Will the Face ID work or will I have to replace the other sensor too. ( will the Face ID work with non original sensor but with original flood illuminator)
@@MicPotato Yes, the flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one. If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable.
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
* REWA Academy Training Book PRE-SALE of iPhone motherboard repair available now!
Do not lose the opportunity to get limited systematic REWA training treasure (1000 limited stock for pre-sale).
> bit.ly/31I5Nks
sir i have iphone xs max, after 3min auto restart. have u any solution for that? plz help me
hi bro,
told me please, how many a temperature of hot air gun?,
use temperature?
good👍
I now.. really believe that after watching every step in this video, taking in every bit of detail, watching it back 11 times, making sure I don’t miss a single thing, really think I should just buy a new iPhone :)
😂😂😂
😂😂😂
😂 😂
Apple store will replace Face ID on iphone X for $169.
ahhh i see! finally after watching this i should just buy a new phone
😂
I know right
😆😆😆😆😆😆
🤣🤣🤣🤣 basically
aka what apple wants you to do
I have had an issue with my iphone x after replacing my screen, i was struggling for months no fault no where. I put my iphone into DFU mode a deeper process than a actual factory reset and it worked. it will restore your phone and download the current ios again. Not sure if it will work for everyone but it definitely worked for me.
EleMelons21 was this with itunes?
skips forward*... sees soldering kit*..... "IGHT... IMMA HEAD OUT"
😂😂
fr 😂😂😂😂
I somehow come across this video while waiting for my soldering station to come, and when it does... I GOT MY FACE ID BACKK BABYY!!! THANKYOUUU FOR GUIDANCE
Nicely done, also the soldering iron pointy bit is called a "tip", nozzle are for hot air gun
Thanks for the correction. We will keep improving.
Any further suggestions and feedback are always welcomed.
It works, I've tried it. Thanks for sharing
We are pleased to offer helpful repair solutions for everyone. Hoping you enjoyed the fun of repair :)
Finally, i see your face :)
:-D
Join in our Cell Phone Repair Facebook Group to discuss the latest repair cases and problems: facebook.com/groups/saveyourphone/
REWA Technology how much this service?
Thanks REWA. Good informative video. Where to get that flex cable without sensor?
how many degrees have you set the temperature for the welding? Thanks
You know the answer?
What temperature would you set the heat gun to?
In this video, we applied 240℃ Celsius with our heat gun.
REWA Technology Thank You!
Conclucion.. we have to extra carefull removing and re atatch the face id module.. 🤔🤔🤔
Tell that to the repair dudes. Or demand thst you stay there and watch them do it. If you have the time for that
@@cristopherpino9689 we refuse to let people into back.
Thank you for this important information. I would like to ask if it is common for the FACE ID to malfunction? What can cause the FACE ID to malfunction?
Greetings and thank you very much
for me face ID sometimes stops working when there is an IOS update that i need to do. or for some reason i need to reboot. Then it starts working again.. but during the or after the december 2022 updates.. as of now, it is still not working.
Should the ambient light sensor always goes with the flood illuminator ?
do you need to solder only the flood illuminator or also the ambient light sensor too have Face ID working again? Thanks
it really works. it was nice proving friends and the repair guy wrong😄
for that, you've earn a subscriber
Thanks for the video, the old ambient light sensor needs to be on the new flex cable or I can just replace the flood illuminator? Because I've already have it in the new flex cable
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore it also should be the original one.
Thanks for watching :)
@@rewatechnology2008 Yeah I know, my question is if the ambient light sensor needs to be the original one like the flood illumator. Thank you
@@TheSimogames The original ambient light sensor should be swept to the new flex cable too. If not, the True Tone function will be failed.
@@rewatechnology2008 Okay, thank you!
I got all the answers after watching this video. Nice work , keep it up.
So if you transfer only the flood illuminator to a new flex cable Face ID won’t work? Need to also transfer ambient light sensor?
that's what I wanted to know as well
Hello, I need the answer...
your work is amazing :)
You are one of the dopest repair man
Will it work after replacing the entire earpiece and sensor part with the flex cable? Thank you
Hi @REWA TECHNOLOGY !! Thanks !! Three questions 1- wich is the temp and airflow on hot air gun 2- wich is the temp on soldering iron 3-when you place the flood thing on the new flex , you already Tin the pads on the flex only ? Or the flood thing too ? Or just on the flex ? Thanks you rocks keep helping community 😘
Hi Hernan. Thanks for the comment.
1. We applied 240℃ Celsius with our heat gun.
2. The temperature of Soldering Iron is about 330℃~350℃ Celsius.
3. The Flood Illuminator Module we used is a new one, so we do not need to tin the pads.
REWA Technology ahh i though the module was linked to the board , it’s not linked ? You use a new one ? Or you meant the flex is new ? Thanks for all you do to the community !! 😘😘
Hernan Narcisi You have to use the same Flood Illuminator to get the FaceID working properly. What he broke was the flex, so basically he took the original flood illuminator and put it in a new flex. Only people that I know that use different flood illuminators are Apple guys, their screens come with the whole front thing, they program it for the iPhone that it’ll use and let it go 👌🏻
How much temp i Need for the iluminator? That i not Distroy it
wow! thanks for the vid! after watching the video thoroughly while taking notes.... i decided to buy a new phone 😝
I watched this video more than 100 times for learning
saludos desde mexico con la destreza que tienes lo haces ver demasiado fácil
Very good job. Wish u guys were in my country. My iPhone x face Id isn't working but I'm way too terrified to even attempt this.
Nice work rewa
Thanks guys got one like this in the other day and im happy to say this sorted it :)
I did this it worked 🙏 thanks
Congratulations For this Great Video
wow, awesome! it seems so hard to operate this, i'd better watch you guys to fix it nor by myself. BTY, the machine looks so cool.
Rewa 🙏🏻🙏🏻🙏🏻please tell me can I use another iPhone X flex cable and replace damage cable flood illuminator module then Face ID can work or not..?
Just helping to answer your question. No, you can't because the flex cable has a specific code to the motherboard. This one is similar like when you demage your touch ID flex cable in iphone 5s, you can not repalce it with another flex cable. But you need to fix the demage one.
Hello for this to work do you need to transfer the flood illuminator module or can you use new flex with generic module? The ear speaker has to be the original correct? Please reply as soon as possible please?????
I see a lot of videos from your company. But i see a thing that alerts me.
Why in the minute 10:28 i see a diffused screen overlay? I don't want to say it's a fake. Because your works are exceptional. Be aware with this things because they can say its false
hello, I watched with admiration of your work, congratulations I did a wonderful job. I send you you made the repair repair FaceID from turkey? and what is the cost of this repair? request information.
If I could I would send you my iPhoneX for repair of both cameras and face I.d I live in Canada
Kadir Keskin türkiyede de yapıyorlar
Send it to me i can help you
Hello Sir, thanks for this amazing help
i have an issue with my Face id on iPhone X
the problem is it keeps saying (move your head a little higher/ position your face inside the square) but nothing happens after
i checked the 2 dots and they are there and working, i checked the flood illuminator by calling and the screen went black which means it's also working, i checked the portrait for the front camera and it also worked, everything in the phone works perfectly, but i should mention that the Display is Damaged and contains a green lines from the left side, could that be a reason for why the face id isn't working, or just my face id died and that's it?
Amazing as always!
Hi is it possible to code new flood sensor from another iPhone?
good job !! nice and clear
i love this repair.. ♥
Hii 9737792305 plz send me message
Thanks Rewa ❤️
At what temperature do you use Iron and heat gun?
Sir please make video OEM screen vs fake screen of I Phone
Thanks for the comment. We do appreciate your suggestion and will take it into consideration.
They kinda did with the comparison of the iPhone X OLED vs the aftermarket couples of months ago...
hi friend, do i need to transfer the ambient light sensor too or use another flex and change only the approach sensor?
Why my position doesn’t recognized but Face ID camera prompt properly. Any tips
hi rewa..exactly same issue (flex cable damage ) for me…will this video alone works or i need to transfer or copy face id values to the new cable ?…does the value stored in flex cable or original face id components?
Do you clean flux off flood illuminator after or too risky?
Will it work if i transfer only flood illuminator to the new flex cable? Since it already had an ambient light sensor and the ear speaker bundled
The flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one.
If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable.
Hope it can be helpful for you :)
Vert good type of work
Thanks for watching :)
All I wanted to do was fix my Face ID & bro just taught me how to build an iPhone from scratch
at 7:02 the flex was bit burned by the soldering machine, wouldn't that affect connectivity?
You can do damage to the plastic casing as long as the traces are intact. It's not enough to affect the copper inside.
wich temperature do you use with te solder iron ? and with temperature on the heat gun ? thank you!
240 Celcius
What amazing video tutorial.
Just love those vídeos
REWA always amazing ! very good Vedio
can you replace the ear speaker without having to solder and it still work or is it like a home button on an iPhone 8
@atom freeman Right, It's like the iPhone 8 home button. Replacement of the ear speaker flex cable will disable the Face ID.
and if you damage the original can soldering fixit
Man you’re a monster!!!
on how many degree do you put the hot airgun when removing the ambient sensor?
I ripped a cable while replacing the screen, so i want to do the same.
Hi, do You have any solution for both cameras not working in Iphone xs ?
hello at what heat temperature do i remove the sensor and then what temperature to resolder
During these operations, the temperature of soldering iron is 360℃ and hot air gun 240℃.
Do you offer a mail-in service for this repair?
very nice work...
i replacing motherboard do i have to buy it with the face id? or only the motherboard will do?
hello always follows your videos. i managed to repair an iphone x face id but i have a problem it takes the configuration after fixing it but it does not unlock you can help me thanks
sir you are amazing
Is there somewhere in the UK I can get this repair done? Thank you.
Apple Stores do a Face ID senser replacement. In the USA they charge $169
Really very nice
Nossa é outro nível, o cara é super profissional, vou aumentar o o meu nível de conhecimento, pena que o dólar estar muito alto, mais temos que fazer um investimento alto.
thank you rewa bro
What about repairing back water damage face id sensor,is it possible??
Jatt King want answer also
What's the price for this service?
For xample the flex cable perfect is but the sensor is damage what should you do
thank you
Hello sir @REWA Technology, excuse me i have the same problem too, i already swapped the new one flex cable. But after that scan face id fixed, auto brightness also fixed, proximity good and the problem when i am going to unlock the lockscreen face id cannot working. Have the solution for fixing this case?
If the speaker on the front screen is replaced does that affect the face id ?
before, i have the warranty about iphone xs ,face id not working ..and even though have been changed machine ..is there same case too?
REWA, would the aftermarket screen affect the Face ID, without any rips on the cables? And do we also need to remove the Face ID before the replacement?
ihsan gene The only thing that you need is to get your original earpiece without broken it and then install it with your new aftermarket screen. Also you don’t have to remove yours Face ID 👌🏻
super danke bist der Beste
If the strip is not cut then? What’s the solution
Hello. I’ve a question. If earpiece is not working properly, can we just replace the earpiece on the old cable and get faceID working?
Hello I bought an entire flex cable/ear piece/flood light sensor part from ebay, it had all of the components already attached. After installing it in the customers phone the FACE ID does not work. Is this a software issue that a DFU restore would repair?
Hello, this is not a software issue and a DFU restore cannot solve the problem. Please be noted that the flex cable of FACE ID is paired to the motherboard inside the iPhone. The replacement can cause the Face ID failure as you mentioned.
So to clarify if you change the iPhone X screen but transfer the original earpiece/sensors to the new screen the Face ID will still work???
ccovnottz Yes, if you don’t broke it 👌🏻
@@kittone5250 fake!
Will this work with the iPhone XS?
Thanks it worked for me.
Lol 😂😂 I'm just kidding.
harish vinjamuri I’m watching this , but am just wondering how I will ever do this
Hello,
When i try to remove the flood illuminator from the flex cable the plastic begins to melt before I can unsolder it. If I lower the temperature I can't unsolder it. I don't understand.
Looks hard af
What happend to ambient light sensor?
how much hot air temp and air flow when removing flood illuminating sensor and put it back on flex cable?
Til it melts bruh.
If I replace the earspeaker and flood illuminator, will the faceid be fix instead of doing all this ?
Please be noted that the Flood illuminator is paired to the phone. Replacing of the Flood illuminator might cause Face ID failure.
REWA Technology what if I bought a ear speaker that comes with all the sensors and I replace that flood illuminator with the original one. Will the Face ID work or will I have to replace the other sensor too. ( will the Face ID work with non original sensor but with original flood illuminator)
REWA Technology also where can I buy the proximity light sensor induction flex cable for iPhone X ?
@@MicPotato Yes, the flood illuminator on the earpiece speaker flex cable is part of the Face ID security feature and therefore should be the original one.
If the Face ID failure is caused by the earpiece speaker flex cable, you can replace the earpiece speaker flex cable and transplant the original flood illuminator module to the new flex cable.
@@MicPotato You can visit REWA Online Shop ( shop.rewa.tech ) or refer to this link:bit.ly/35K6fhV
good joob i have seam problems
thanks
классная работа )!
wow! you are the best!
10:48 i like that scenes!
Cool! Right?
Can this support in true depth camera not working and face id please answer
Very useful
Where to buy a new flex cable ?
Роман Гарькавец You can buy the whole earpiece and remove the flood illuminator and put your original one 👌🏻