iPhone X face ID not working (boot looping and not turning)
HTML-код
- Опубликовано: 30 апр 2020
- This iPhone X came in with a problem that the phone was boot looping and not turning on.
so after further testing turns out that the phone had corrosion on the face ID ambient light sensor.
so in this video i am showing you how to fix the face ID on an iPhone X since that without the ambient light sensor the face ID will not working because as in the iPhone 5S the face ID parts all married to the CPU and cant be replaced even with an original parts.
You can send your device for this or any other repair.
contact me here:
itouchrepairservice@outlook.com
Or simply you can contact me on facebook or instagram link below.
Instagram:
itouch_pro_1?ut...
And on Facebook:
/ itouchpro
#microsoldering #faceidrepair #iphonexrepair
keywords:
iPhone x not turning on
how to fix iPhone x face ID
how to fix iPhone x not turning on
iPhone x bootloop
how to fix iPhone x boot looping
iPhone x face ID repair
how to repair iPhone x face ID
how to repair iPhone x not turning on
how to repair iPhone x
how to repair iPhone x bootloop
iPhone x ambient light sensor not working
how to fix face ID
how to repair face ID
iPhone x face ID not working
how to fix iPhone x face ID not working
iPhone X rebooting
How to fix iPhone X that keeps rebooting
iPhone X keeps rebooting 
Наука
I don’t usually leave comments, but I wanted you to know that your video truly helped me. Last summer my iPhone suddenly stopped working and I had my journal backed up to the iCloud, so when it crashed I was not initially worried. No one could fix my phone and I realized the iCloud did contain a backup of my journal but both the journal app company and Apple did not know how to retrieve the data. The only known copy of my journal was trapped on my boot looping iPhone X. These moments were so precious to me that I tried so so many methods to fix the phone. My problem was also a corroded Face ID ambient light sensor. I followed your instructions and disconnected it and my phone came back. It’s back. You gave me my phone back and my lost moments back. I will forever be grateful. Thank you so very much.
This is giving me hope! Mine just started doing this and I have soooo many pictures.
Thank you. Very helpful!
very cool to watch you work! I'm having the same issue and I was looking around and landed on your video. I don't have the tools or skills to do what you're doing so I guess I will need to find a replacement sensor lol
Just tear off the flex connected to Light sensor. Of course before it try to clean it with a needle. If not do the first thing.
I have the same problem. I will try first to clean it. If not I have to cut the ribbon
That is cool
thanks bro. keep going
Very good job,i have same problem i will inspected this flex
Saved my phone! Thanks!
You work so clean👌
years and years of practice
The illuminator is paired the logic board?
thank you i liked and subscribed too by the way.
Thanks vidyos 🤝
complimenti bravissimo
Excellent work dude🤩🤩🤩
thank you and have a nice day
Very clean work , congrats !
thanks))))
What was use to remove the cable
Quick question I have a iphone x same issue but mine a bit different. If I unplug the Face ID speaker adapter the phone turns On, but when I plug it back up it reboots I changed the whole lcd and it does the same thing phone comes on only if connector is not plugged, so for sure it’s not corrosion casue I replaced it instead of swapping the piece , some how it’s making me feel it’s something wrong wit the connection On the phone instead of the speaker adapter connector Any ideas what it can be, and of course without it I have no FaceTime, they can deal wit that but u can’t hear anything and have no earpiece speaker to talk
so great
I had this happen to me. What I did was to take the proximity sensor/earpiece assembly out and unfold and un-crease all the ribbon cables i could find. I reached the part shown at 6:40 and removed the adhesive that was holding that part to the adjacent sensor. Once that was done, I tested it and it started working!
what did you do to that did you clean and it work?
This is exaclyt what happened to my phone
very clean work,perfect and professional, i don't like your collegiests from China and Co. ,they work so dirty....i have no words
thank you))))
Sir i have issue in my iphone x face id not available on this mobile this msgs reflecting i think display is changed
@iTouch
Great video. My iphone X memory was so full and it stopped taking pics thru caMera app but it still let me take pics thru whatsapp because of smaller file size. The phone went on boot loop. And is now stuck on recovery mode. Updating isnt working because there is no storage space. Is there a way to switch the phone on or retrieve data. What can be done?
If its not a hardware issue, what is the method to retrieve data
Did you fix this, I have the exact same issue. Please reply?
@@tcsk685 did you fix it? i have the same isssue
@iTouch
Hi,
You said in the video you'd take up questions.
Left you comment earlier about bootloop/recoverymode screen due to storage full. Please reply
What error dose the iTunes gives you when updating?
@@iTouch-repair error 14.
Memory storage full
@@simmerahluwalia there's no solution yet 😭
@@sarahwreisner8718 thank you for your response. Please post a reply if there is a solution in the future.
@iTouch
How do you fix an iphone X stuck in recovery mode because of a full storage. It went into a bootloop and then updating failed because of lack of sufficient storage.
Would the phone require to be opened for this issue? What is a possible solution?
Waiting to hear from you
I has the same isssue to me i fixed it by removing the face id top flex cable completely and tried to restore and got it
I have a iPhone x face id not working its making lower higher and also its becomes temperature warm so when I’m calling putting in to my ear the sensor screen not going to be off so the solution is what ??? Answer it plz
Hello I’m new to your channel but I have a question can a iPhone XR Face ID be transfer to a iPhone X??
No
Can u repair my iPhone X Face ID not available
Change the whole flex cable will the ambient light work
Face id wont work anymore
Sir..how to know flex is damaged or chip..? Which is best i2c vs Luban.?
Hi, i would recommend Luban chips
I’ve been using them for a while now and they are very cool to install
Either way you need to remove the dot projector from the housing and the Prisma but for the i2c the base of the projector can sit incorrectly and then you not only have a problem with the sensor and also you have a problem with installing back the projector base to the housing
So I would say go with the Luban, that’s my choice
You can see that I have a video on my channel about the Luban chip if you need a reference on how to do such a repair
yeah i got this problem it does work after a while but it disabled face id
it depends if the water got into the dot projector
could i just cut the face id flex cable if i think its the problem? i dont have the 'y'- screwdriver needed to open it and face id didnt work anyways.
Why do you think it’s the Face ID flex?
What is happening to the phone?
that’s stupid just get a screwdriver
I have iPhone X and I have damaged the cable you just repaired, would I be able to send it to you for similar repair?
Hi, yeah sure.
I am located in Ukraine if you would like to send I will repair it.
@@iTouch-repair If I send you just the cable and sensor assembly how much would it cost to replace the cable?
Also I hope things are safe there for you, I am in Australia
@@gregrutherford5350 yes I can replace it but I can’t give guarantees as I can’t test it on the phone.
Yeah everything is good here thanks for asking.
@@gregrutherford5350 as for the cost I don’t know you will need to check with your post office.
@@iTouch-repair yes, I meant your cost to repair it
Did you get a new flex to do the transfer…???
Yes
اى الحل عندى الفيس اى دى مش عايز يشتغل
Yeah i can’t do by myself too complicated
Can you just disconnect it and not use Face ID and speaker?
Yes it worked still but the speaker and fax d won’t work again
My iPhone 12 is doing this and idk how to fix it my Face ID quit working and the next morning it was in a boot loop
I have same problem with my iphone x,
If you disconnect it will the speaker still be okay?
The speaker is soldered to the flex, if you disconnect the flex there will be no upper speaker.
Okay
My iphone X right now had the same issue
Will it still be fixable if i let it left untouch for 15 days? Because i can't afford to take my phone to the technician right now
If I ma ask,if get what your saying you shouldn't have issues when changing the screen, if a problem comes up with the face ID,Is not Recognized, it's your fault when disassembling you damaged a flex or what ever other piece,so changing the screen (LCD) Ect shouldn't and isn't responsible for the face ID not working after reassembled
@@jean-luclortie5001 The screen it self is not responsible.
my Face ID is not working and also my down right speaker is not working only the top speaker works why?
Thanks for the RUclips video tho. But this didn’t
Thanks you so much #KIDITECHIE on Instagram. My iPhone got water damaged and my face ID wouldn't work. Now it does thank you so much.
Thanks for the RUclips video tho. But this didn’t
Thanks you so much #KIDITECHIE on Instagram. My iPhone got water damaged and my face ID wouldn't work. Now it does thank you so much.