Por más experiencia que haya es necesario darle, el Torque específico., a las partes internas del motor En mi opinión. pero respeto su forma de trabajar saludos..
If you want an engine to last you have to follow the manufactures torque specs, it's crazy not to yes it's faster but the engine won't last long, the rods weren't torqued, valve lash not set nothing done correctly, I guess they are creating their own future work maybe that's the plan?!
They will probably score and eventually fail when they take it apart again it will probably be crank bearings and various metals in the bottom of the pan if not threw the pan.
Yes this engine won’t last long lol rods not torqued,head not torqued, valve lash not set, Rocker shaft not torqued , and I’m pretty sure he didn’t match the connecting rods to the proper caps it looked like too which is pretty important too. But hey it’ll run
@@jaymoney3583 Thanks I was testing my self really only started watching these videos a few weeks ago after an expensive trip to the garage......amazing what you can learn so easily now
i give it 6-12 months and that engine will be scrap from either, warped head, bent rod or an engine knock, you didn't torque anything down to spec, heads probably already warped, didn't even check valve clearance.
Oh God, save, bless and bless everyone who recites this prayer to the Prophet, and contributes to spreading it (Oh God, bless Muhammad and his family, as you prayed on Abraham and the family of Abraham, you are the praiseworthy and glorious. And bless Muhammad and his family. You also blessed Abraham and the family of Ibrahim.
They probably used the old head gaskets lol
That valve lash set on this poor cat 😬, didn’t even see them torque it to spec 😬😬 shit
Why spec, this is very profesional with minimum tools.
@@markomikic6394 it is also not expensive to bye a torque wrench seems that they are going to use it often
maybe they do it so much the spec is already in the eye to brain hehehe
@@markomikic6394 bullshit it's a hack job dude
Thats about feeling
Torque to spec out the window
Sequence forget about it
Driving oil pan bolts with a pneumatic gun sure why not it's faster.
I give that engine 1 week 💣😂
This is some deep in the backwoods of Wuhan, Alabama shit right there 🤦
el torque y apriete angular con la mano nomas? Nos olvidamos del orden de apriete? Jaja
Por más experiencia que haya es necesario darle, el Torque específico., a las partes internas del motor
En mi opinión. pero respeto su forma de trabajar saludos..
If you want an engine to last you have to follow the manufactures torque specs, it's crazy not to yes it's faster but the engine won't last long, the rods weren't torqued, valve lash not set nothing done correctly, I guess they are creating their own future work maybe that's the plan?!
Woo , gran trabajo el que ase un mecánico mil respetos maestros dela mecánico
Damn y'all boy's make an engine rebuild look so easy!!!
Because they cut so many crucial corners lol
@@2x_Sol soooo many. A proper engine build has more time taken measuring the clearances then the amount of time it takes to actually assemble it
Hahahaha wtf did I just watch 😬 well atleast they put a new started on in maybe the guy will crank it all the way back to the shop IF it breaks down
Old style job...village job...dont u guys have a table to do the piston work.....thats why i dont trust other mechanic..
Hi....i am from aceh indonesia
Valve lash specs 👌🏼
Well done steve manuel from malta
I like this video brother
What's the warranty like after this?
Never mind everything else who fits shells bone dry 😑
Why doe this man makes it look soo hard to assemble
您用来清洁模块内部的高压清洗机是什么
and then steve goes to rebuild the engine ...
I love pistons and cylinder
Will this not just blow because they didn't set the torque on the cam shaft bearings?
Crankshaft bearings that is
They will probably score and eventually fail when they take it apart again it will probably be crank bearings and various metals in the bottom of the pan if not threw the pan.
Yes this engine won’t last long lol rods not torqued,head not torqued, valve lash not set, Rocker shaft not torqued , and I’m pretty sure he didn’t match the connecting rods to the proper caps it looked like too which is pretty important too. But hey it’ll run
@@jaymoney3583 Thanks I was testing my self really only started watching these videos a few weeks ago after an expensive trip to the garage......amazing what you can learn so easily now
Torque wrench?
Fun to watch :)
Nice video? Watt is the name of tool to insert piston into rue cylinder? Thanks à lot
Piston ring compressor
Apertando parafuso de biela sem torquimetro e reutilizando parafuso de cabecote e tbm apertando sem torquimetro serviço porco do caramba!!!
Claudio esse cara nunca viu um torquimetro na vida kkk muito mulanba kkkk
Serviço de porco.
Did they even check the clearances for the bearings?
Nope lol
Didn't even look like they put any oil on em.
Bro can u recorded it 16.9 pls
Mostra o motor funcionando.
Ils ont des péteuses mais pas de clés Dynamo. ?
Engine successfully F***ED 😂😂😂😂
Nie ma to jak składać silnik na pałę.
Aren't you supposed to pressure fit those sleeves
Man I love how you work smart not hard!!
That aint smart at all, stevie wonder would do better
Do you notice that they reinstated oil pan on the old and broken seal ?
Radiotor air fan back side fitting
Why video quality poor
TIGHT IS TIGHT!
Luz de válvulas???así???🤔
Rip torque wrench, rip filler gauge
Классно все запчасти оригинал
i give it 6-12 months and that engine will be scrap from either, warped head, bent rod or an engine knock, you didn't torque anything down to spec, heads probably already warped, didn't even check valve clearance.
i have a truck for sale
engine rebuild by proffesionals trust me 😂😂😂😂😂😂😂😂😂😂😂😂
Where’s the new head bolts
did they just use old headbolts?
Looks like it
Torque key is in Arm....? Or mind
..?
When he fart thats sign to torq is reached 😂😂
0,25 0,30 aspirazione scarico👋
Lmao 😂 u every heard of a torque wrench 🔧
Super mechanic👍👍
Torgue specs o my god save as
Las llaves dinamométricas están caras
cool boss
👍👍👍👍🥰🥰🥰
Oh God, save, bless and bless everyone who recites this prayer to the Prophet, and contributes to spreading it
(Oh God, bless Muhammad and his family, as you prayed on Abraham and the family of Abraham, you are the praiseworthy and glorious.
And bless Muhammad and his family. You also blessed Abraham and the family of Ibrahim.
Бомба супер молодец
Доста бе
Меня возьмите я качесвеней соберу!!!
3:30 torqued to spec I see
Me joinha
Whatta cowboy job lol
Plenty good
Iike
9 comment
Village mechanic?.... where torque wrench?
God
Hello
Por eso las cosas chinas no sirven
Torque....
👍👍👍👍👍👍👍💪💪💪💪💪
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
عندي طريزينة ادخن بطلوع ليش
معقول من بنزين الحراقات
rzeźnik
Half ass jobs lol
👍👍👍
عمل ممتاز واصل🇩🇿🇩🇿🇩🇿🇩🇿👍👍👍
compra torgue hijo y calibrador de balbulas
First
👍
Shitty torque specs
Stop whining about torque wrench and go build one fuckin engine before.
Hello
7465819611