hi, sorry if i missed it but why did you install a link between L4021 and D4021 when you only lost the solder pad that linked between D4021 and U4020? cheers, Lee
Thank you so much for the video, a great Job done, I have an important advice for you and I hope you take it seriously. You must install a ventilator which I don't see that you are using one to help you suck all the smoke from welding, flux, etc.... It's not good at all to smell and breath this as it will by time will effect your health. Cheers.
I don't know how many of these type of videos that I have watch but I am always amazed that you have the skills to be able to solder such tiny objects. Even under the microscope they look small but to see the actual size of them on the desk when you pop them out of the packaging, I am continually astounded.
I enjoy watching STS Telecom and Rossman. I know these RUclipsrs mostly work on Apple products and I'm thinking how large the scale of economic opportunity is in this field of electronics repair beyond Apple products and small electronic devices. I want to learn not only how to fix small devices but also, electric cars, appliances, and all kinds different things with electronic circuits inside. The opportunities in this work field are very large. Thankyou for this great content! It inspires me to think above and beyond!
You are amazing! I can't thank you enough for your channel and videos (and this one in particular). You gave me confidence to try micro-soldering and attempt data recovery on my wife's phone. And I did it!! I removed my first shield based on your instructions, diagnosed the short with a power supply, and found the short to be the big cap from this video! (I cheated with a thermal imager tho :) The phone booted and I just finished pulling all the photos off of it (blindly, cause no backlight lol) BTW this is after the local repair shop spent 3 days messing around with it, changed the charging IC and said it needs a new main board, and didnt want to even attempt data recovery! Thank you again! Please keep up the amazing content. PS I might be sending it your way to put the cap and diode back :) sorry for the mess
Amazing, exactly same repair I did on Monday and I couldn't find a video. My track also removed on the diode but managed to get some solder on the remaining small visible track pin point and diode soldered to that. Plenty of UV on it.
That boardview+PDF is a feature I've been trying to integrate in to OBV as well, running in to licencing issues, looks like will have to go commercial :( Glad to see it's working out better than zxw for you too, I know I'll be changing over.
Had one of these recently. I can soldering and do BGA no problem but never spent time learning diagnosing. I had one 6s water damaged where diode would burn, changed IC but didn't change that CAPACITOR now i feel like calling that customer back lol
Desperation maybe.. hehe.. Honestly, could have been the difference of being more comfortable with leaded solder but without re-watching the video, I may have seen less solder on those 2 pads/jumper than before. Probably more like desperation :D
Great work! One hour gone and I'm not missing it. But funny how you said before that you have should tin that one diode first and I just think 'do it now, just to be sure' but then you swap the ic instead of checking this one diode, that just shows that it's by far not that easy like you make it look like the most time, there can be several things all the time causing problems and you have just to decide with which of them you begin. Thanks for showing us and explainig all the time what you do, I'm really curious about trying microsoldering myself.
Another very good video! I have an iPhone 11, Logic board is really bad, caps removed all over the board. Someone who did not know what they were doing really messed it up. And on the facebook marketplace, they are asking so much for a unlocked iPhone, with bad screen etc. they are asking so much for them, can't afford that.
Your jumper wire material is varnish coated. You had tremendous difficulty getting that recreated "loop pad" flowed down to that tiny pad fragment due to the varnish on the wire. It appears to be motor winding wire which must be stripped of the varnish insulation first. Use #600 wet/dry paper to strip it, or gently scrape it with the blade well and finish with acetone.
I just subscribed please don’t disappoint me I used to watch this other guy outta NY just started talking so much shit in his videos about random shit and it was annoying. I don’t do repairs but it is interesting to me how you guys fix these phones thanks nice work
Hi Jason, If you have ZXW and Blackfish open together.. It does the same as Easydraw, In that if you select a component on the pcb it will automatically go to it and highlight it on the schematic :) Cheers, John
hi STS Telecom my iphone5s appear invalid serial during flashing how can i fix that problem.. when i try to connect with itune there is no serial show please give some advices thank u
I have iPhone 6s with no backlight if I send my phone to you can you fix it and how much? I live in Pennsylvania Pittsburgh where are you located at can you tell me please. Thank you
I got faulty iphone 6 plis.. The owner said the screen wont turn on after change new battery.. But after i manage to get the phone.. I try to connect with usb charger.. But the only things happen oinuuess the backlight turn on continues and wont turn off.. What is the problem sir..
Hi please help me. My iphone 6 plus get 20 v dc from charger and now it stuk/hung on apple logo. Here no software issue. What can i do. What is the problem in my phone Pls help
Great content in your videos.. Quick question.. Where did you buy your bench workstation from? I’m curious,what’s the size of your hanged monitor? I like your setup and I’m in the process of setting up a workspace @ Home. Contemplating a space in the garage or one of the rooms in the house.
Hameed Cole Ikea. I purchased a 7' × 3' desk with adjustable height for $110. And the wall mounted shelves were maybe, $7. If you're looking for a prefab desk with shelves, they had those too.
Thank you. I bought this bench from a local business that was getting rid of furniture. It was used as their front counter for their customer service area. The monitor is 43".
Can you help me to get one microscope like your. How much cost or kindly give me model so I my self look where I can get that kind of stuff. Thank George villanueva
Congrats on being a mini electronics SURGEON and Sherlock Holmes on that backlight repair. Now I know my purchase of a microscope will not be overkill. Thanks J K
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thanks for watching my videos everyone! It's because of you this channel is nearing 30k subs!
hi, sorry if i missed it but why did you install a link between L4021 and D4021 when you only lost the solder pad that linked between D4021 and U4020? cheers, Lee
STS Telecom thanks for the video
Thank you so much for the video, a great Job done, I have an important advice for you and I hope you take it seriously. You must install a ventilator which I don't see that you are using one to help you suck all the smoke from welding, flux, etc.... It's not good at all to smell and breath this as it will by time will effect your health. Cheers.
Husam Sidani hopefully he has some kind of air extractor hidden somewhere.. All that flux fume is Hazardous..
STS Telecom i need help about the iphone can you give me the number brother🙏
exactly why I love your videos. little editing and show the struggles that are faced when doing these repairs
Serious work which others would give up on gives you 100% credibility.
I don't know how many of these type of videos that I have watch but I am always amazed that you have the skills to be able to solder such tiny objects. Even under the microscope they look small but to see the actual size of them on the desk when you pop them out of the packaging, I am continually astounded.
I enjoy watching STS Telecom and Rossman. I know these RUclipsrs mostly work on Apple products and I'm thinking how large the scale of economic opportunity is in this field of electronics repair beyond Apple products and small electronic devices. I want to learn not only how to fix small devices but also, electric cars, appliances, and all kinds different things with electronic circuits inside. The opportunities in this work field are very large. Thankyou for this great content! It inspires me to think above and beyond!
Edward Tsema check ipadrehab.com cool
Edward Tsema and you can check REWA technology too, they are all so cool channels.
Now that’s a delicate procedure you sir are surgeon to electronics 👌👌
Good job, it's great to see how with all your experience you can still run into problems and it's raw and honest.
You are amazing!
I can't thank you enough for your channel and videos (and this one in particular).
You gave me confidence to try micro-soldering and attempt data recovery on my wife's phone.
And I did it!! I removed my first shield based on your instructions, diagnosed the short with a power supply, and found the short to be the big cap from this video! (I cheated with a thermal imager tho :)
The phone booted and I just finished pulling all the photos off of it (blindly, cause no backlight lol)
BTW this is after the local repair shop spent 3 days messing around with it, changed the charging IC and said it needs a new main board, and didnt want to even attempt data recovery!
Thank you again! Please keep up the amazing content.
PS I might be sending it your way to put the cap and diode back :) sorry for the mess
awesome video jason i really like how you show the size of the components against real world objects most do not understand the scale of things :D
Thank you mr. Sts telecom
Nice Work love you from Bangladesh 🇧🇩🇧🇩🇧🇩🇧🇩
Man you make it look easy! Just starting out doing this sort of work and your videos are very informative and reeeeeealy helpful!
Always appreciate your videos.
Thanks so much for that software! I've been looking for one for so long, finally found one.
Amazing, exactly same repair I did on Monday and I couldn't find a video. My track also removed on the diode but managed to get some solder on the remaining small visible track pin point and diode soldered to that. Plenty of UV on it.
Great work! Enjoy watching your videos.
Great work, I can't wait to see your next video. Thank you very much for sharing yours knowledge about those repairs. Thumb UP 👍
i did the exact same repair last week!! same pad, had to do a loop from the glass diode and then the coil.
That boardview+PDF is a feature I've been trying to integrate in to OBV as well, running in to licencing issues, looks like will have to go commercial :(
Glad to see it's working out better than zxw for you too, I know I'll be changing over.
This is a job well done my friend...pure talent !!...BRAVO !
Had one of these recently. I can soldering and do BGA no problem but never spent time learning diagnosing. I had one 6s water damaged where diode would burn, changed IC but didn't change that CAPACITOR now i feel like calling that customer back lol
Enjoying watching your videos .
Thank you! 🙏
@45:58 just wondering why you decided to not remove the two solder balls on the driver the second time around please Jason ? ?
Desperation maybe.. hehe.. Honestly, could have been the difference of being more comfortable with leaded solder but without re-watching the video, I may have seen less solder on those 2 pads/jumper than before. Probably more like desperation :D
Amazing. I am speachless. What a repair!
Great work! One hour gone and I'm not missing it. But funny how you said before that you have should tin that one diode first and I just think 'do it now, just to be sure' but then you swap the ic instead of checking this one diode, that just shows that it's by far not that easy like you make it look like the most time, there can be several things all the time causing problems and you have just to decide with which of them you begin. Thanks for showing us and explainig all the time what you do, I'm really curious about trying microsoldering myself.
You are very good, you are number 1 hello from Antonio Italy, Liguria, Albenga. Hi
Thank you for your instructive videos.
Another very good video! I have an iPhone 11, Logic board is really bad, caps removed all over the board. Someone who did not know what they were doing really messed it up. And on the facebook marketplace, they are asking so much for a unlocked iPhone, with bad screen etc. they are asking so much for them, can't afford that.
Very good repair ! Awsome !
Nicely done, thank you for the video. Regards, Dave
Very helpful video! I want to start doing repair but I need to learn a lot first! Shaking hands don’t help 😂! Keep the good work!
Your jumper wire material is varnish coated. You had tremendous difficulty getting that recreated "loop pad" flowed down to that tiny pad fragment due to the varnish on the wire. It appears to be motor winding wire which must be stripped of the varnish insulation first. Use #600 wet/dry paper to strip it, or gently scrape it with the blade well and finish with acetone.
I just subscribed please don’t disappoint me I used to watch this other guy outta NY just started talking so much shit in his videos about random shit and it was annoying. I don’t do repairs but it is interesting to me how you guys fix these phones thanks nice work
Thank you very much. You are perfect teacher
Thanks it was a pleasure to watch
Great job 👍
Congratulations 🥰🙏👍🍎
Hi Jason, If you have ZXW and Blackfish open together.. It does the same as Easydraw, In that if you select a component on the pcb it will automatically
go to it and highlight it on the schematic :)
Cheers, John
Hello John, nice to see you out and about. Regards, Dave
David Legault.. Hiya Dave 👍 Yea I'm always around just keeping an eye on things 🙂.
Cheers, John
Thank u John. I didn't know that about ZXW. Also good seeing you around still :)
STS Telecom .. Hi Jason..👍 🙂
greetings my brother from indonesia I like the way you work
heya nice repair it connects or not
hey do u have 6s no graphic no light solution ????
What’s the green glue used?
Sir what the name of diagram that u are using please sir…??
Hey man I like your videos and sending my i6 in soon
Godamm this is some professional work huge respect sir 👏🏼❤️
Thanks MR
Afternoon
My iPhone 6s just went dark can you fix it for me and for me? And for how much?
Great job , sir
Br
sir,i have an iphone 5s..today i trying to update ios 11.3.1 on my phone but showing error14.what i have to done ?
From where you get this software when i get all info about that software ???
witch jumber wire you used
I have 6s,but the back light works and goes off please i need guide line to repair
good good nice job sir
hi STS Telecom my iphone5s appear invalid serial during flashing how can i fix that problem.. when i try to connect with itune there is no serial show please give some advices thank u
You make things for real
Happy days!
What's the name of that site you use
nice job bro👍👍
thank you !! it's a hard job to do .
Nice work sir u r rock
Hi, give me advice please. Iphone 6 no network and no imei, i changed q/poet, wtr, pm 8018, and renew u1,v1 under mdm, what do you think about it?
Good repair
great sir your videos awesome sir please answer my 1 question witch dongle best for hardware ripering iPhone Samsung and all other....
Thank u. I like ZXW tool & EasyDraw (no dongle)
I have iPhone 6s with no backlight if I send my phone to you can you fix it and how much?
I live in Pennsylvania Pittsburgh where are you located at can you tell me please.
Thank you
Why dont you use zxw?
i have a same issue.. ty sir.. for u big help..
I love jumpers.
Thanks
I got faulty iphone 6 plis.. The owner said the screen wont turn on after change new battery.. But after i manage to get the phone.. I try to connect with usb charger.. But the only things happen oinuuess the backlight turn on continues and wont turn off.. What is the problem sir..
sir please make video in iphone 5 charging section....
Hi please help me.
My iphone 6 plus get 20 v dc from charger and now it stuk/hung on apple logo.
Here no software issue.
What can i do.
What is the problem in my phone
Pls help
Does anyone have an estimate on how much this could cost to be sent for repair?
Hey Jason, good to see you recording. Can you tell me how you hooked up you microscope cam to record video? Cheers, Alex
Thanks :) My camera is hooked up via USB and works like a webcam. I use Open Broadcaster to record.
Thanks Jason!
Woww Nice Work Bro Awasome
good brother keep it up
Well that was a bugger, but it has a 'Bright' future now :-D.
Don't short out coils in switching supplys, "Storage not filter" :-).
Hi sr. jason.Whats is your flux? Sorry my english
Your english is good. I'm using Chipquik SMD291.
STS Telecom thanks
nice video sir 😊☺
Great content in your videos.. Quick question.. Where did you buy your bench workstation from?
I’m curious,what’s the size of your hanged monitor? I like your setup and I’m in the process of setting up a workspace @ Home.
Contemplating a space in the garage or one of the rooms in the house.
Hameed Cole Ikea. I purchased a 7' × 3' desk with adjustable height for $110. And the wall mounted shelves were maybe, $7. If you're looking for a prefab desk with shelves, they had those too.
Thank you. I bought this bench from a local business that was getting rid of furniture. It was used as their front counter for their customer service area. The monitor is 43".
vids n description r good
Sorry dude but i have to ask :) 6s plus, rear cam & flash, lost pads under u3200, can i just jump from C3200 to FL4120 ??? sorry thank you:) sorry
you are a super dude! ;)
Can you help me to get one microscope like your. How much cost or kindly give me model so I my self look where I can get that kind of stuff.
Thank
George villanueva
I need help Boss
Legendary
Ok beavis we need new videos I’ve been rewatching old videos
Very soon now. Kids are back in school and I'm starting to get some breathing room. :-)
STS Telecom better hurry I bet you got 2 weeks tops before they are back home don’t forget it’s not November 4th yet
buen video master
gracias maestro no se ingles pero como hace el trabajo le entiendo todo.
Nice
Good
guide me sir i phone diagram
"Lead free solder is to easily " . Thats why Apple like it
Congrats on being a mini electronics SURGEON and Sherlock Holmes on that backlight repair. Now I know my purchase of a microscope will not be overkill. Thanks J K
🔥🔥
Trace pads repair, premade better than using wires ... On ebay..
👍
😍😍😍
Follow up from Iraq
You do pretty good with this, considering you obviously have Parkinson's. :D
morocco watch you
nice job bro👍👍