Depends on the compatibility with my existing hardware/planned future builds, battery life and range IRL (not as reported, since that's never accurate) and cross-brand compatibility. Since I build, my stuff is never the same from drone to drone. Also... for that same price, you can easily pick up a "Refreshed" fat shark or similar from the rain forest online merchant YT doesn't allow named, so it would be a comparison there between a known good product and a new contender. They would have to offer enough more than the old one for me to justify it. I do applaud the price, though, as this puts it in the affordable realm of a lot more people vs the average 3x this price that I see on other brands. Edit: by existing hardware, I mean components like chargers/batteries/controllers I already have from other RC hobbies besides drones. But... as a new user, I'd still want to know I can use it on any future ones I own/build. At least for a few years. I hate buying stuff that's outdated/unusable 6 months later. Edit 2: Oh, except it's not compatible with anything, even the camera modules we might have already, so the actual entry price is $379.99... (Can't just plug in an existing starvis module to their tx module or anything, which also limits you to ONLY using their cameras. Closed system.)
Stu, I'm glad to see you still in it. You are one of a few youtubers that inspired me to get into the hobby. I flew from 2016-2023 almost daily but more recently I haven't really been able to afford to maintain a set of gear. I'll fly again one day but I'm just happy to see you still doing your thing. Happy flying Stu!
Thanks so much mate. Honestly this is the most passionate I've felt about sharing FPV in probably the last 5 years. I've got so much to share and show people cool stuff. What part keeps breaking on your gear?
@@UAVfutures My need to drive somewhere is a large part of the cost. I also need batteries, my bag and GoPro both broke. It all just adds up. No worries at all though. I'll be back in the air eventually. I'm more hyped to see you having a good time talking about new gear.
I’ve been out of the hobby for a few years now. So glad to see you’re still at it! You and Josh Bardwell were my go to channels when I started back in’ 15
FINALLY! I've been avoiding DJI for a while due to personal reasons, but man... I won't lie and say I wasn't jealous of their FPV. I feel both amusement at their paying 10x as much as I did and not building it themselves, and also a bit of jealousy over the amazing range/FPV they get straight out of the box. We fixed the range thing, pretty much, so it's just been a wait for the FPV. Thanks again, but I think I can hear my wallet cursing in the next room already! Gotta get this!🙂
@@LovesM855A1if you like your information and data going to China keep using Dji … lol why do you think they’re banning DJi it’s not because they’re a stand up company ….
They do make a very compelling point at $199. Personally on my craft I actually prefer caddx over DJI. I also like the smaller air units caddx walk snail offer. Great for little micro rippers
I watched this channel so much many years ago. I learned how to build drones. I wanted to implement them in combat. Turns out to be a really good idea. I shoulda followed through.
If you purchase these, Whatever you do, DO NOT forget to pull the battery out of your pocket before you set your goggles down and walk off. I've had a set of DJI goggles with a broken screen since my second use of them a couple years ago. I printed a battery clip for them afterwards but the broken screen has progressively gotten worse. I can't justify spending another $300 to replace the screen. Since then my flying time has decreased immensely.
Great point. I do have a set of those but the difference between those goggles and these ones is night and day. I've got a review on them here too. I would like to try the real hd zero goggles though.
These would be amazing for beginners to pair with one of the BNF walksnail whoops from happymodel or betafpv. 👍 I do wish they were a little more flexible... if only they had added some SMA antenna ports.
Nice review. For me, head tracking is a must as I use my drone for inspection in tight spaces with lots of obstacles. Would love a review of a complete system ...
@UAVfutures I fly the DJI Avata 2. My needs are long flight time, precise control (no swoopy doupy stuff for me), and head tracking. Typically, I am inspecting outdoor plumbing, farm structures (roofs, fencing, etc), and electrical lines. So far, this has been the best solution. Ideally, I would like to build my own, but I have been unable to find the 'full solution '. Thanks for your videos.
No, they didn't. You can buy a lense frame for 4 euros. The detachable lens design supports various vision needs, allowing for the installation of nearsighted, farsighted, or blue light-blocking lenses to meet individual preferences.
Thanx for this great review! Do you have access to the FatShark Recon HD Walksnail goggles and could you do a comparison with the Avatar Goggles L ? They seem to be very similar, as far as I know with basically these differences: - The Recon HD have an external video output, the Avatar don't. - The Recon HD can be used with optical correction glasses, the Avatar is too narrow for that. - The Recon HD have an FOV of 44°, the Avatar 75° - is this like comparison between a home tv screen and imax cinema? And what else differences are there? Is there a difference in visual quality, etc...?
Great box goggles, but a real shame you cannot change antennas...will have do mod as per DJIs. I thought Walksnail was listening to the FPV community....
Either I did not catch it in the video or it wasn't mentioned but I just received the goggles with quite the confusion. I think a huge point to hit here that was missed, especially when recommending these to beginners, is that the Battery connector to the goggles is a XT60 connector found on batteries like the 4s and 6s rather than the 2s which are XT30s.
I guess for the price they had to cut something out. They don't do all the bells and whistles extra stuff etc. but what they do do is cheap digital FPV that feels great. My video going up today actually filmed inside both these and the cobras
I really don‘t understand people like that. Somebody drops a really nice product with price tag that is greatly lower than anything before. And people immediately complain that there are golden bells and whistles missing… 🤡
@@GrmlMaster not really, for people who are already flying analogue, most of them are flying with at least the cobras. For cheaper than these goggles, they can move on to the walksnail system with the walksnail vrx system and get a better experience. Don't you think due to this, walksnail might lose out on customers who are already flying analogue and want to shift to digital? I believe these are amazing goggles for anyone new to fpv, but for those who fly analog and want to shift? I believe they're better off getting the vrx for way cheaper and, more importantly, versatile system.
@@raps55 From what i have seen, the VRX Receiver alone costs more than the new googles, so for less money you get the receiver plus the goggle-hardware instead of a receiver and an hdmi port. So people can choose what is the better deal for them depending on their hardware. I really don‘t know what‘s to complain about…
@UAVfutures yes, I have a hellfirefpv team shirt for sure. @DemonsFPV the founder of the hellfirefpv team asked Zak from risingsunfpv to make us a shirt for people to buy. He did an amazing job of the shirt. We are glad you like the shirt.
I'm far too invested in DJI now to justify moving to a competitor's system. If I was just starting in the hobby, I'd be buying these straight out though. Also, the VTX recording quality is a bit blurred out, even though it's meant to be 1080p. Compression artifacts, etc. What are the standard and max bitrates of that Walksnail system? It looks like DJI at 720p set to 25mbit. Minor complaint though.
yeah its hard to change systems once you are invested. i wouldnt swap either if I already spent cash on another system. But this is a great system and an ever better price for a new pilot
Hi Stu. I left FPV a few years back - wasn't happy with analog at all, it just didn't do it for me. Around the time AOMAY V1 with diversity came out and I had those. I sold everything and decided to wait for digital. It might finally be here.
The killer for me are they are not glasses friendly, which is what I was hoping for when I saw a WS box goggle coming. Looks like i'll be sticking with my Cobra X's and getting the VRX instead.
This is what Steve used to fly. Skyzones with the rx. He's not a racer but never complained about latency. He was new back then though so he may feel differently now. Want me to ask him anything in particular?
I'm a heli pilot and already have several radios. Will these work with the tiny Whoops and smaller quads? Does the radio connect to the goggles or does it share telemetry data on a specific bus?
they connect to a walksnail 1 s kit. perfect for a 2s micro light you can see in my lightning v2 review. however for a whoop it is still just a tiny bit too bit. no the fpv system does not talk to the radio
I don't know if I should get them. I wanted to buy a flywoo flylens 85 analog, because it is on sale now, and i saw that there is fir 80 dollars more the walksnail one. So now I'm not sure what to do...😅 But i think, that I'll go with the caddx one. Good review, thanks. ❤
To whom it may concern I've tried to get into flying have purchased so.e good and some not so much got a cheep set of fat sharks which I love but my remote left alot to be desired and my last whoop well it's been a min since they first became popular and well needless to say it wasn't the best quality and have really missed flying so being this recommended kit puts a bell in my bonnett and I may just jump the price is perfection exactly what I've been waiting looking hoping for to find and to aquire thanks a bunch
Looks awesome, just got an analog Meteor85 but might have to switch to the hd version with this coming out. Do you know when the goggles will actually be released (not pre-order)? Thanks, awesome vid!
There aren't really any BnF walksnail whoops, but with the newest version of the 1s lite, you can make a 65mm whoop easily only at 20ish grams. If you do a lot of trimming and some ingenuity, I've seen builds down to 17g-18g.
These sound great but it seems everyone has overlooked the Fatshark Recon HDs. Only a little more expensive, but a few extra good features like HDMI out.
Thank you for the informative video. Do you know if there is any way to get a video out from these? I saw that they have the same PCB as the fatshark recon HD that do have a video out. I thought that maybe it might be possible to get a video out by doing some small internal modification. I would really appreciate any opinions on this matter.
I think this is perfect for us with high end digital setups that want to able to make a cheap digital whoop without investing $ in gogs . I think this will be exactly why I want this product and lack on antenna mid does not phase me
They're box googles so if your frames are small enough you may be able to use them as is but if not the tech specs say: "The detachable lens desgins supports various vision needs, allowing for the installation of near-sighted, far-sighted or blue light blocking lenses..."
So my question mate is looks like a good starter kit in my opinion i am looking myself at getting a set because i still have analog lol but can these goggles be paired to any of the walksnail vtx IE moonlight kit im interested in getting both these goggles and the moonlight kit because of 4k resolution would look amazing and 4ks range could uou maybe do a complete range test with on screen display of how far it will actually go just curious because i have had many different analog systems and all claim to go 5 or more ks but can never get it myself any information for it would be great
I was waiting for something like this do drop but honestly I would like to see different antenna options. Coming from someone that being flying analog exclusively, how relevant is circular and directional antennas for digital fpv? From what I saw these goggles come with a dual directional setup
What VTX and camera were you using in the video? I'm planning to get the goggles L and Avatar HD V2. Will the video quality on the goggles be similar during daylight?
@@UAVfutures I got HD Zero goggles recently with the idea of testing walksnail in the future with a module... but this comes in even cheaper... so yeah seems like a no brainer to go with these before investing in a new system fully
The quadcopter is transmitting on an open channel, you can only connect one for two-way communication but you can connect an arbitrary number of devices for receive-only.
its wireless. SO the main recieving headset passes the image onto the ride along set. and im not 100% sure this, BUT from what i have heard. IF you start loosing signal etc, the main goggles will stop trying to "broadcast" etc and focus everythingon getting your signal back to the main pilot if your drone is about to be lost etc.
Sorry for the stupid newbie question here... so these goggles are outside the DJI universe then so what kind of drones OS am I able to work with with this?
any drone you stick a walksnail video transmitter in. imagine DJI like apple. replacing part of an apple laptop is not really done and a closed eco system in computers. Well the walksnail is like a intel or AMD cpu, you can use it in a variety of pcs. stick a walksnail vtx in any drone and you can now get an fpv feed. does that make sense?
great question. So all digital systems need an reciever and a transmitter. we call the transmitter either the VTX for video transmitter or airunit. The RX or reciever is basically whats built into the goggles we wear. all the digital systems need their own system to intergrate with, no mix and match. This specific system is the walksnal avatar system. So the drone has its own walksnail airunit that only walksnail goggles can decode and recieve. does that make sense?
Im at 2 minutes now and you showed off the gogles, And 200 usd new does seem reasonable that would be like 50/100 bucks used I just hope they are also going to get cheaper camera's as digital cameras are also verry expensive
Cool! For compact single unit and close range it's cheap👌. For long range flights I'd still go with their standalone VRX, DIY antennas, (w/ antenna tracker) output either to a screen or any analog googles that has HDMI in 👌☕
Do u think these will pair well with the radio master tx16s mark 11 radio ??? I'm trying to enter fpv and it's kinda confusing but I bought my radio first n I figured my goggles next then my drone can u plz let me know tho if them two will work together
Goggles and radios are always compatible. For the goggles, the vtx or air unit has to be compatible, and for the radio, the drones receiver's protocol(like elrs, tbs, frsky)
Hey! Will you review the ymzfpv Lighting 2? I know you liked the 1 so much and sadly its out of stock and I wanted to buy one. But maybe the new one is even better?
was so exited that i could finally try out some digital fpv then i remember i still need to buy the camera and vtx for this system... well, at least i know what to get when my analog vtx need replacement
Great video. Can any one tell me my Hudson h501s drone would I get the same read out on FPV googles as I do on my screen on the radio control so every single thing on my radio control screen the same on googles. Thanks
@@UAVfutures Yes! I have just never been able to justify investing such an enormous amount of cash into switching to digital, this really brings into into the more affordable range for me, and I am sure for a lot of others as well :-) Most embarrassingly, both my mate and I are still using our very first goggle purchases from years ago when we started ... remember the Quantum Cyclops V2??? lolololol Now just to convince our wives that 'the time has come' LOL
ok - I tried reading all the comments but gave up - so at the risk of it already being asked... what vtx/camera would you recommend to go with this? And - Glasses? Does it still work? Thanks!!
Any if the walksnail camera systems are compatible with it. It depends on the build, what you need. 1s whoop, or cinematic drone, all different needs. Like for the 1s there is the avatar lite, and for the cinewhoop, the moonlight.
Thanks! The thing I've been struggling with is finding goggles that can go over glasses... Was hoping this would as a box goggle (looks like the DJI N3 goggles are glasses friendly... But then you're tied to DJI! But is that a bad thing!? Does DJI kit play nicely with everything else? Or just other DJI kit... Love to see a review of the N3 goggles though!
@@robstanbridge8059 the n3 goggles are garbage right now, because they're only compatible with the neo and avata 2. And yes, glasses can fit into them.
@@UAVfutures do they? I don't see that information anywhere, so is 60 Hz a deal breaker? And is it still a good idea to get the Goggles L at $200 when the DJI N3 are $229 and the O4 Lite is expected to be $120? Also I can get the DJI V2 for $230, so is 810p 120fps 144 Hz (for O3 only) better than 1080p 60 FPS 60 Hz (O4 and CADDX)?
Yeah, you can use a monitor instead of goggles, but it won't be as immersive. But you would still need to have a vrx(receiver) like the walksnail vrx with hdmi input. But those are also like 200$
When are these fpv goggles going to ha e the same fov as vr headsets? I use vr daily for work, rhen when switching to these fpv goggles its like looking at 2 poststamps from half a metree away
never, also pilots have consistantly given feedback that too much FOV is actually more difficult to fly with when going at high speed. large fov is great for a ride along, but not so much for actual piloting.
Man this could the thing that finally gets me into FPV. I've been sitting on the wall forever, my one burning question is : Can you wear these with glasses?
If you started tomorrow would you buy these for $199 bit.ly/WalksnailGogglesL or something else?
Depends on the compatibility with my existing hardware/planned future builds, battery life and range IRL (not as reported, since that's never accurate) and cross-brand compatibility. Since I build, my stuff is never the same from drone to drone.
Also... for that same price, you can easily pick up a "Refreshed" fat shark or similar from the rain forest online merchant YT doesn't allow named, so it would be a comparison there between a known good product and a new contender. They would have to offer enough more than the old one for me to justify it.
I do applaud the price, though, as this puts it in the affordable realm of a lot more people vs the average 3x this price that I see on other brands.
Edit: by existing hardware, I mean components like chargers/batteries/controllers I already have from other RC hobbies besides drones. But... as a new user, I'd still want to know I can use it on any future ones I own/build. At least for a few years. I hate buying stuff that's outdated/unusable 6 months later.
Edit 2: Oh, except it's not compatible with anything, even the camera modules we might have already, so the actual entry price is $379.99... (Can't just plug in an existing starvis module to their tx module or anything, which also limits you to ONLY using their cameras. Closed system.)
HELL NO! WALKSNAIL HAS PROBLEMS MAKING GOOD QUALITY PRODUCTS. They're 💩💩💩💯💯💯⬇️⬇️the🚽🚽
$310 Aussie for anyone wondering
Too bad I can't combine them with those 200 USD *color* night vision systems because that would wild af
@@russellzauner what system is that?
Stu, I'm glad to see you still in it. You are one of a few youtubers that inspired me to get into the hobby. I flew from 2016-2023 almost daily but more recently I haven't really been able to afford to maintain a set of gear. I'll fly again one day but I'm just happy to see you still doing your thing. Happy flying Stu!
Thanks so much mate. Honestly this is the most passionate I've felt about sharing FPV in probably the last 5 years. I've got so much to share and show people cool stuff. What part keeps breaking on your gear?
@@UAVfutures My need to drive somewhere is a large part of the cost. I also need batteries, my bag and GoPro both broke. It all just adds up.
No worries at all though. I'll be back in the air eventually. I'm more hyped to see you having a good time talking about new gear.
I’ve been out of the hobby for a few years now. So glad to see you’re still at it! You and Josh Bardwell were my go to channels when I started back in’ 15
Welcome back! you still flying?
FINALLY! I've been avoiding DJI for a while due to personal reasons, but man... I won't lie and say I wasn't jealous of their FPV. I feel both amusement at their paying 10x as much as I did and not building it themselves, and also a bit of jealousy over the amazing range/FPV they get straight out of the box. We fixed the range thing, pretty much, so it's just been a wait for the FPV. Thanks again, but I think I can hear my wallet cursing in the next room already! Gotta get this!🙂
Say what you want failsnail and anything else don’t compare to DJI, oh and I built 90% of MY drones with 03…..
@@LovesM855A1oh of course gotta be failsnail right. And you have all the money for o3 interesting how much tho...
@@LovesM855A1if you like your information and data going to China keep using Dji … lol why do you think they’re banning DJi it’s not because they’re a stand up company ….
Cool goggle but not close to some goggles 2 and a 03 unit worth the money
They do make a very compelling point at $199. Personally on my craft I actually prefer caddx over DJI. I also like the smaller air units caddx walk snail offer. Great for little micro rippers
Bro!!!! HELLFIRE!!!!! I'm a team pilot!!!! RAFfpv!!!!! So awesome to see you wearing it!!!!
@@rafaelnieto9470 🔥🔥🔥🔥
Yeah brother. Where you fly at?
I'm one of the U.S. pilots. Bryan, Texas
Inexpensive digital fpv is the appropriate description.
I watched this channel so much many years ago. I learned how to build drones. I wanted to implement them in combat. Turns out to be a really good idea. I shoulda followed through.
Fantastic video and advice without ego…thank you!
Gonna get one of these setup with the gm3 for a FPV RC car. Very cool
If you purchase these, Whatever you do, DO NOT forget to pull the battery out of your pocket before you set your goggles down and walk off. I've had a set of DJI goggles with a broken screen since my second use of them a couple years ago. I printed a battery clip for them afterwards but the broken screen has progressively gotten worse. I can't justify spending another $300 to replace the screen. Since then my flying time has decreased immensely.
Sorry for your loss. Where they new at the time?
@@UAVfutures Sitting in a cabinet in my garage.
About HD Zero : Emax does make an HD Zero box google that can be converted to an external screen. The price is pretty comparable to those.
Great point. I do have a set of those but the difference between those goggles and these ones is night and day. I've got a review on them here too. I would like to try the real hd zero goggles though.
$128 for analog vtx and decent goggles vs $300 for walksnail. Still not there but close.
@@siggins44you can get a whole walksnail quad for under 300
These would be amazing for beginners to pair with one of the BNF walksnail whoops from happymodel or betafpv. 👍 I do wish they were a little more flexible... if only they had added some SMA antenna ports.
I'll buy only when teardown video is available and diy sma ports are added
I am sure Ian will be along with a teardown shortly. It needs modding for certain but might even make me go digital!
I agree. BUT I really did enjoy the stock reception I got. Would you switch a patch or something else?
@@UAVfutures Yes i want to switch from omni to patch and back depending on conditions i'm flying.
Nice review. For me, head tracking is a must as I use my drone for inspection in tight spaces with lots of obstacles. Would love a review of a complete system ...
what drone do you fly it on?
@UAVfutures I fly the DJI Avata 2. My needs are long flight time, precise control (no swoopy doupy stuff for me), and head tracking. Typically, I am inspecting outdoor plumbing, farm structures (roofs, fencing, etc), and electrical lines. So far, this has been the best solution. Ideally, I would like to build my own, but I have been unable to find the 'full solution '. Thanks for your videos.
what model or kit would you recommend for the head tracking?
How cool is this. Man, I can imagine sitting on my porch and sending my drone into the park near me. If I were bedridden this would be cool also.
It's too bad they ignored people who need to wear glasses.
No, they didn't. You can buy a lense frame for 4 euros. The detachable lens design supports various vision needs, allowing for the installation of nearsighted, farsighted, or blue light-blocking lenses to meet individual preferences.
Get contacts nerd…
I can't get them in my eyes... 😭
Hey I just found out you can get custom lenses for the goggles from the cadex site, all you need to do is provide them your glasses script.
Not everyone can wear them dumbass@@ReallyGoodBadBoy
Thanx for this great review!
Do you have access to the FatShark Recon HD Walksnail goggles and could you do a comparison with the Avatar Goggles L ?
They seem to be very similar, as far as I know with basically these differences:
- The Recon HD have an external video output, the Avatar don't.
- The Recon HD can be used with optical correction glasses, the Avatar is too narrow for that.
- The Recon HD have an FOV of 44°, the Avatar 75° - is this like comparison between a home tv screen and imax cinema?
And what else differences are there? Is there a difference in visual quality, etc...?
Hi, are these goggles a better experience than say putting the walksnail vrx on my hdzero goggles?. Which one would be best
Thanks for the review i have it on my list for now!
what other components are on the list so far?
@@UAVfutures i had the emax hawk but but after your latest kit video im just buying what you recommended!
Let’s go Team Hellfire!! Love your t-shirt! 🤘🏻🔥
You another team pilot for them?
@@UAVfutures yep, from California USA🤘🏻
Been a fan of yours and a sub since I started flying in 2018, glad your back Stu 💪🏻
Great box goggles, but a real shame you cannot change antennas...will have do mod as per DJIs. I thought Walksnail was listening to the FPV community....
What antennas would you choose?
@@UAVfutures my own! For mid|long range a good set of helicals or cross-hairs, for bando|freestyle I would first try the stock antennas, cheers mate!
Very nice energetic review "old school" with a modern twist ... you are back chap!!
Love ya work
Either I did not catch it in the video or it wasn't mentioned but I just received the goggles with quite the confusion. I think a huge point to hit here that was missed, especially when recommending these to beginners, is that the Battery connector to the goggles is a XT60 connector found on batteries like the 4s and 6s rather than the 2s which are XT30s.
Great review and very convincing. Thanks. How well do these goggles accommodate to glasses, please?
Glasses are not compatible, you need to buy the custom Made correction lenses. (30$)
amazing goggles, but i wish they drew some inspiration from the skyzone cobras, like an hdmi input and an analogue bay or something
I guess for the price they had to cut something out. They don't do all the bells and whistles extra stuff etc. but what they do do is cheap digital FPV that feels great. My video going up today actually filmed inside both these and the cobras
I really don‘t understand people like that. Somebody drops a really nice product with price tag that is greatly lower than anything before.
And people immediately complain that there are golden bells and whistles missing… 🤡
@@GrmlMaster not really, for people who are already flying analogue, most of them are flying with at least the cobras. For cheaper than these goggles, they can move on to the walksnail system with the walksnail vrx system and get a better experience. Don't you think due to this, walksnail might lose out on customers who are already flying analogue and want to shift to digital? I believe these are amazing goggles for anyone new to fpv, but for those who fly analog and want to shift? I believe they're better off getting the vrx for way cheaper and, more importantly, versatile system.
@@raps55 From what i have seen, the VRX Receiver alone costs more than the new googles, so for less money you get the receiver plus the goggle-hardware instead of a receiver and an hdmi port.
So people can choose what is the better deal for them depending on their hardware.
I really don‘t know what‘s to complain about…
6:56 Did you use the Moonlight System for the video?
My bad. I watched further and you said moonlight. Sorry 😅
yep, but I also showed a 1s kit at the first part flying around my house with the family. I think its at the start some where
Awesome to see you wearing our Hellfirefpv team shirt Stu. 🤘👹🤘
THIS IS THE 3RD COMMENT on that shirt lol. Do you have a shirt? I got mine from risingsunfpv in aus
@UAVfutures yes, I have a hellfirefpv team shirt for sure. @DemonsFPV the founder of the hellfirefpv team asked Zak from risingsunfpv to make us a shirt for people to buy. He did an amazing job of the shirt. We are glad you like the shirt.
I'm far too invested in DJI now to justify moving to a competitor's system.
If I was just starting in the hobby, I'd be buying these straight out though.
Also, the VTX recording quality is a bit blurred out, even though it's meant to be 1080p. Compression artifacts, etc. What are the standard and max bitrates of that Walksnail system?
It looks like DJI at 720p set to 25mbit.
Minor complaint though.
yeah its hard to change systems once you are invested. i wouldnt swap either if I already spent cash on another system. But this is a great system and an ever better price for a new pilot
Hi Stu. I left FPV a few years back - wasn't happy with analog at all, it just didn't do it for me. Around the time AOMAY V1 with diversity came out and I had those. I sold everything and decided to wait for digital. It might finally be here.
did you like the aomways?
what are they like as a second pair for someone else to fly along with your flight on your main goggles, do they hook up as well as the goggle x ?
The killer for me are they are not glasses friendly, which is what I was hoping for when I saw a WS box goggle coming. Looks like i'll be sticking with my Cobra X's and getting the VRX instead.
You won't have any fun with this, Cobra X with the Walksnail VRX has very high latency.
Yes, it's really sad that glasses don't fit.
@@DanielR8484 Yes thats what I've heard. TBH I'll probably stick with analogue as the steadyview module is pretty darn good.
This is what Steve used to fly. Skyzones with the rx. He's not a racer but never complained about latency. He was new back then though so he may feel differently now. Want me to ask him anything in particular?
@@UAVfutures oh cool. I guess his overall experience with it all. Whats the weight like on the face for example.
Is the recorded video from the goggle or from the onboard sd? Did you experience any stutter with that refresh rate?
I'm a heli pilot and already have several radios. Will these work with the tiny Whoops and smaller quads? Does the radio connect to the goggles or does it share telemetry data on a specific bus?
they connect to a walksnail 1 s kit. perfect for a 2s micro light you can see in my lightning v2 review. however for a whoop it is still just a tiny bit too bit.
no the fpv system does not talk to the radio
I don't know if I should get them. I wanted to buy a flywoo flylens 85 analog, because it is on sale now, and i saw that there is fir 80 dollars more the walksnail one. So now I'm not sure what to do...😅 But i think, that I'll go with the caddx one. Good review, thanks. ❤
I bought the Walksnail camera and vtx. Not sure wether to get these or the Fatshark recon HD ?
Vs the ev800d, how was the perceived screen size? Larger.. smaller??
In screen size, a little bit smaller. I have both. But the video quality is sooo worth...
What are the camera accessories they offer with the goggles?
Does it work with the dji neo.? Both the remote and this goggles?
Sorry If I missed, but which VTX? Will it be compatible with Analog vtx systems? Pls cover as well.
Btw thanks for this review video!🤘🏻
What kind of drone can you use the googles with?
To whom it may concern I've tried to get into flying have purchased so.e good and some not so much got a cheep set of fat sharks which I love but my remote left alot to be desired and my last whoop well it's been a min since they first became popular and well needless to say it wasn't the best quality and have really missed flying so being this recommended kit puts a bell in my bonnett and I may just jump the price is perfection exactly what I've been waiting looking hoping for to find and to aquire thanks a bunch
Looks awesome, just got an analog Meteor85 but might have to switch to the hd version with this coming out. Do you know when the goggles will actually be released (not pre-order)? Thanks, awesome vid!
There aren't really any BnF walksnail whoops, but with the newest version of the 1s lite, you can make a 65mm whoop easily only at 20ish grams. If you do a lot of trimming and some ingenuity, I've seen builds down to 17g-18g.
Digital builds down to that much?
max distance this goggles l can go? 1 or 2km? or below 1km?
tech specs list >4km
What drone did you use in this video? I would like to have a digital kit because I love the realism!
These sound great but it seems everyone has overlooked the Fatshark Recon HDs. Only a little more expensive, but a few extra good features like HDMI out.
Thank you for the informative video. Do you know if there is any way to get a video out from these? I saw that they have the same PCB as the fatshark recon HD that do have a video out. I thought that maybe it might be possible to get a video out by doing some small internal modification. I would really appreciate any opinions on this matter.
Not that I know of
I think this is perfect for us with high end digital setups that want to able to make a cheap digital whoop without investing $ in gogs . I think this will be exactly why I want this product and lack on antenna mid does not phase me
Is there an option for internal prescription lens inserts or are these only for people without glasses?
They're box googles so if your frames are small enough you may be able to use them as is but if not the tech specs say:
"The detachable lens desgins supports various vision needs, allowing for the installation of near-sighted, far-sighted or blue light blocking lenses..."
So my question mate is looks like a good starter kit in my opinion i am looking myself at getting a set because i still have analog lol but can these goggles be paired to any of the walksnail vtx IE moonlight kit im interested in getting both these goggles and the moonlight kit because of 4k resolution would look amazing and 4ks range could uou maybe do a complete range test with on screen display of how far it will actually go just curious because i have had many different analog systems and all claim to go 5 or more ks but can never get it myself any information for it would be great
No way!!!! I can finally go FPV? Too Cool. I think Ill get them now
Do you have any other gear?
I was waiting for something like this do drop but honestly I would like to see different antenna options. Coming from someone that being flying analog exclusively, how relevant is circular and directional antennas for digital fpv?
From what I saw these goggles come with a dual directional setup
What VTX and camera were you using in the video? I'm planning to get the goggles L and Avatar HD V2. Will the video quality on the goggles be similar during daylight?
Yes, it's similar
Is this working with Air75 Brushless Whoop Quadcopter? Thank you
No. The air 75 whoop is analog. But it will work with the meteor 75 pro's walksnail version.
If I were upgrading an analog quad, what hardware should I look at to go with this?
Walksnail is making a great case to switch
would you get them?
@@UAVfutures I got HD Zero goggles recently with the idea of testing walksnail in the future with a module... but this comes in even cheaper... so yeah seems like a no brainer to go with these before investing in a new system fully
How do you connect the goggles to the drone?
Do you have any Optical correction devices
How does "ride along" work? Do you have to connect them via HDMI to the Goggles X?
The quadcopter is transmitting on an open channel, you can only connect one for two-way communication but you can connect an arbitrary number of devices for receive-only.
its wireless. SO the main recieving headset passes the image onto the ride along set. and im not 100% sure this, BUT from what i have heard. IF you start loosing signal etc, the main goggles will stop trying to "broadcast" etc and focus everythingon getting your signal back to the main pilot if your drone is about to be lost etc.
Can multiple Walksnail Rx's watch 1 Tx? (i e. for ride along)
like watch one flight with say 3 or 4 ride along goggles?
@@UAVfutures Right
And with the 2W VTX coming out now, what a combo!
teh walksnail one?
Sorry for the stupid newbie question here... so these goggles are outside the DJI universe then so what kind of drones OS am I able to work with with this?
any drone you stick a walksnail video transmitter in. imagine DJI like apple. replacing part of an apple laptop is not really done and a closed eco system in computers. Well the walksnail is like a intel or AMD cpu, you can use it in a variety of pcs. stick a walksnail vtx in any drone and you can now get an fpv feed. does that make sense?
@@UAVfutures Wow thanks!
So this is just for the goggles? What about the digital camera for the feed you need to see it in digital? Or does it turn analog to digital?
great question. So all digital systems need an reciever and a transmitter. we call the transmitter either the VTX for video transmitter or airunit. The RX or reciever is basically whats built into the goggles we wear. all the digital systems need their own system to intergrate with, no mix and match. This specific system is the walksnal avatar system. So the drone has its own walksnail airunit that only walksnail goggles can decode and recieve. does that make sense?
Is there anyway to use an analog vtx with this goggle?
Im at 2 minutes now and you showed off the gogles,
And 200 usd new does seem reasonable that would be like 50/100 bucks used
I just hope they are also going to get cheaper camera's as digital cameras are also verry expensive
Cool! For compact single unit and close range it's cheap👌. For long range flights I'd still go with their standalone VRX, DIY antennas, (w/ antenna tracker) output either to a screen or any analog googles that has HDMI in 👌☕
Do u think these will pair well with the radio master tx16s mark 11 radio ??? I'm trying to enter fpv and it's kinda confusing but I bought my radio first n I figured my goggles next then my drone can u plz let me know tho if them two will work together
Goggles and radios are always compatible. For the goggles, the vtx or air unit has to be compatible, and for the radio, the drones receiver's protocol(like elrs, tbs, frsky)
Would you invest in these or higher end if you plan to spend any real time flying fpv.
Im thinking about starting is there any 4 inch drone that i could buy with the goggles thay u recommend?
why specifically do you want a 4 inch?
@@UAVfutures it dosent really need to be a 4 inch but i just dont want a whoop
Hey! Will you review the ymzfpv Lighting 2? I know you liked the 1 so much and sadly its out of stock and I wanted to buy one. But maybe the new one is even better?
Stay tuned for tomorrows video... Did you fly one?
@@UAVfutures Yeeees I am looking forward to the Vid. No not yet
Is there any way these can be used with a Mavic Air 2?
Nope.
was so exited that i could finally try out some digital fpv then i remember i still need to buy the camera and vtx for this system... well, at least i know what to get when my analog vtx need replacement
if you could get the vtx and cam and goggles for 199 it would be too good to be true
Maybe a comparison with the fatshark recon HD which look the same but more expensive and no head tracker. I have those and I am very happy with.
if you had those, I dont think you need to switch. save the $$
Is there a small camera (around 5 grams) that i can pair with these goggles? I want to use them on my umx plane
the walksnail hd mini is like 9g
@@Harel-DIY with vtx? Or without?
@@Jeroenvdb88 with the vtx, yes
Does this have any video input to support modules?
no it does not, bare bones digtial FPV. I would like that feature too, BUT how much does the add in cost? I dont know
Can you do a range test video?
I'll try do a follow up soon
So, I guess there is no HDMI or other input to view a feed from another video receiver. Is that correct?
Yes. If you need that, only available on the goggles x
another win for Walksnail
I like their products just need more updates and big fixes from them. Do you fly walksnail?
hell yeah
sounds awesome to me and dvr looked amazing
Great video. Can any one tell me my Hudson h501s drone would I get the same read out on FPV googles as I do on my screen on the radio control so every single thing on my radio control screen the same on googles. Thanks
The goggles are just half the part. What is a good camera and transmitter to go with these goggles
This is AWESOME news :-) Thank you
my pleasure. you going to jump in to digital?
@@UAVfutures Yes! I have just never been able to justify investing such an enormous amount of cash into switching to digital, this really brings into into the more affordable range for me, and I am sure for a lot of others as well :-) Most embarrassingly, both my mate and I are still using our very first goggle purchases from years ago when we started ... remember the Quantum Cyclops V2??? lolololol Now just to convince our wives that 'the time has come' LOL
Looks like the walksnail system is the way to go.
Love this style of video. Grumpy Trev is missing
he lives 1500 miles away : (
@@UAVfutures we know. Australia is huuuuge.
What is the range? How far can fly without loose video?
Love the head tracking feature
I'm kinda a newb. What does it mean by it's goggles only? Like no antennas?
the antennas are built in to these goggles
@UAVfutures so then what does Google's only mean?
ok - I tried reading all the comments but gave up - so at the risk of it already being asked... what vtx/camera would you recommend to go with this? And - Glasses? Does it still work? Thanks!!
Any if the walksnail camera systems are compatible with it. It depends on the build, what you need. 1s whoop, or cinematic drone, all different needs. Like for the 1s there is the avatar lite, and for the cinewhoop, the moonlight.
Thanks! The thing I've been struggling with is finding goggles that can go over glasses... Was hoping this would as a box goggle (looks like the DJI N3 goggles are glasses friendly... But then you're tied to DJI! But is that a bad thing!? Does DJI kit play nicely with everything else? Or just other DJI kit... Love to see a review of the N3 goggles though!
@@robstanbridge8059 the n3 goggles are garbage right now, because they're only compatible with the neo and avata 2. And yes, glasses can fit into them.
Do the goggles do the 100fps low latency mode, or are they only 60fps?
60fps
Just adding it does do race mode though
@@UAVfutures do they? I don't see that information anywhere, so is 60 Hz a deal breaker?
And is it still a good idea to get the Goggles L at $200 when the DJI N3 are $229 and the O4 Lite is expected to be $120?
Also I can get the DJI V2 for $230, so is 810p 120fps 144 Hz (for O3 only) better than 1080p 60 FPS 60 Hz (O4 and CADDX)?
What became of Grumpy Trev , Stew ?😮
Thanks for stopping back by. He lives 1500 miles away. I moved states
@@UAVfutures, I had him in thoughts and was wondering if he's alright , Okay , I understanding !
Which VTx u r using
Does “Ride Along” work on these goggles with the X google?
yep. so fun
Will it work with the Potensic Atom drone
No, only with drones, that have the walksnail camera systems.
Would these be usable for someone with glasses?
sorry, I dont think so, either contacts or not these.
OMG $200 this is so beautiful for new fpv and you can also get a nice rc controller for cheep aswell
Do you have a controller yet? Do you pinch or thumb?
Could u fly indoors with them? Or too little penetration?
absolutly. but not with a 5 inch freestyle drone, but you could build a smaller drone with their 1s kits. have you seen those?
Can a monitor be used, in place of goggles?
Yeah, you can use a monitor instead of goggles, but it won't be as immersive. But you would still need to have a vrx(receiver) like the walksnail vrx with hdmi input. But those are also like 200$
are these just the same as the fatshark walksnail box goggles?
I havent reviewed them but I would say no. walksnail system but the form and function of these I would guess is a lot lot better.
When are these fpv goggles going to ha e the same fov as vr headsets? I use vr daily for work, rhen when switching to these fpv goggles its like looking at 2 poststamps from half a metree away
never, also pilots have consistantly given feedback that too much FOV is actually more difficult to fly with when going at high speed. large fov is great for a ride along, but not so much for actual piloting.
Eyes glasses work well with these goggles?
I did a little bit of Google research on this... There apparently is a detachable prescription Glass lens product, etc
Man this could the thing that finally gets me into FPV. I've been sitting on the wall forever, my one burning question is : Can you wear these with glasses?
im going to say no. Like ill try cram some in there, but i think there is not enough room. what about contacts? not the best solution but something
So, 200 for the goggles? And what drones are compatible?😊
Drones, what have the walksnail video system.