I personally laminate mine and use clip hooks to hang the prices and descriptions near the piece. I’ve also seen artists just use cubicle “name plaques” that have the hooks in the back to hang
I have an Art show in Oct, Only doing it for fun don't really care if I sell or not. My art is very similar to yours. Some of my peices are really heavy like 8- 10 layers of 1/8 " Plywood. Would the flourish product be good enough or should I go to a metal grid.
So my heavier products use the strap hangers (showed in the add ons section). I do a mix of heavy and lighter weight stuff so if your produce all heavy stuff, the metal grids may be your best option to be honest. I have noticed if they are too heavy the mesh holes will stretch a little.
Hey! So I have Velcro sand bags I use that easily go over the brackets. You can use the disc weights but it will raise the lower brackets a little (making your mess not as “tight) Also I can seen different people use cement blocks or cement PVC pipes tied to the legs that won’t affect the walls at all. Hope that helps!
Since they are mesh, the wind can blow through them which is a benefit. They do blow in and out slightly(like tent sides would if they were on) but honestly they have been the safest walls my products have been on for any outdoor show.
@@TessZizak I have never had anything completely blow off but I do make wood products which had some weight to them already. The worst that has happened is the bottoms of my products will blow up if there is a big gust that comes through but nothing has fallen.
That's very cool. You've got the nicest wood panels...
How would you recommend tagging artwork? I don’t want to attach the tag to my painting but to the mesh.
I personally laminate mine and use clip hooks to hang the prices and descriptions near the piece. I’ve also seen artists just use cubicle “name plaques” that have the hooks in the back to hang
I was waffling on Flourish or DIY, and you sure convinced me! I mentioned your name when ordering!
Ah thank you! You seriously will love it❤ Good luck on the upcoming show season! I have been working on editing my latest market vlogs😅
I have an Art show in Oct, Only doing it for fun don't really care if I sell or not. My art is very similar to yours. Some of my peices are really heavy like 8- 10 layers of 1/8 " Plywood.
Would the flourish product be good enough or should I go to a metal grid.
So my heavier products use the strap hangers (showed in the add ons section). I do a mix of heavy and lighter weight stuff so if your produce all heavy stuff, the metal grids may be your best option to be honest.
I have noticed if they are too heavy the mesh holes will stretch a little.
@@southwooddesign thanks for your reply, do you have a Facebook page. I'd like to ask you some advice
What do you do about rain with the mesh panels-do you put up the tent wall behind them?
@@hryall123 yes, the tent wall goes behind them. If the bottoms get dirty, I clean them with Dawn dish soap and scrub them for spot cleaning.
Can you share the link where you get the pop up tent thank you
Hey! Here is the link and everything else I use for my shows are in my Amazon store front ❤️
amzn.to/47J3oa6
Great set up ! Thanks for sharing. I'm heading over to their website now.
Great to hear! If you have any questions, let me know if I can help :)
Can you send a link to where you got the 12-in strap hangers?
They are on the Flourish website under accessories :)
@@southwooddesign Thank you so much!!!!
Can you tell me if the strap hangers are made of aluminum or steel? What I really want to know is will a magnet stick to them?
@@prairie12321 I just tried a magnet and it did not stick
@@southwooddesign Thanks again!
How do you bag your art pieces when someone purchases it at a fair? Do you have die cut handle bags?
The smaller pieces fit in brown Kraft bags I’ve purchased, but larger pieces I send home with corner protectors (bubble wrap too if I have enough)
I just ordered the tent off your Amazon page!! Are the legs square or octagon? It’s confusing trying to order my panels!!
Hey! The ABC tent has square legs :) glad you found this video helpful!
What is your tent brand?
Hello, It is the ABC Canopy brand :)
a.co/d/9YUwTgT
Trying to figure out if there will still be space for tent weights
Hey! So I have Velcro sand bags I use that easily go over the brackets. You can use the disc weights but it will raise the lower brackets a little (making your mess not as “tight)
Also I can seen different people use cement blocks or cement PVC pipes tied to the legs that won’t affect the walls at all. Hope that helps!
Where do you purchase the strap hangars?
Hi Arlene! They are also from the Flourish website linked in the description
How do these walls hold up in the wind?
Since they are mesh, the wind can blow through them which is a benefit. They do blow in and out slightly(like tent sides would if they were on) but honestly they have been the safest walls my products have been on for any outdoor show.
@@southwooddesign thanks! Have you ever experienced your pieces being blown off the walls or are the s hooks pretty sturdy
@@TessZizak I have never had anything completely blow off but I do make wood products which had some weight to them already. The worst that has happened is the bottoms of my products will blow up if there is a big gust that comes through but nothing has fallen.