Well that's great! No more mosquitoes in Lamar County, I seen them all headed south. The bad news is all the nats stopped by here to land on my new yellow paint. Ha haa! When you grow up and make it big on the tube you can be like Bad Chad and have a separate climate controlled museum for your show cars so you can have your shop back. And last but not least, you're welcome to use my EndoScope Camera anytime. Or heck, get Vevor to send you one ... would have made a great video and they would have loved you for it! Merry Christmas to ya'll.
I hope your right about the mosquitoes lol. I need to reach out to vevor and order me one, doubt I’ll ever be bad Chad status but hey a guy can dream!! Merry Christmas to you also Bob, be safe my friend.
That’s awesome. It’s a old Chevy it will run. Lots of work but definitely paid off . MERRY CHRISTMAS 🎄🎁 to you and your family may 2024 be your best year ever. Blessings 👍😎✌️
Great will it run video! I was beginning to have doubts! But you persisted! Motor sounds strong! Great video guys! Merry Christmas and Happy New Year!!👍👍
I am seventy four, twisted wrenches since I could get out to the shop with my dad and since was a mechanic ever since. I have owned so many square body trucks that you would be amazed. I have owned a good many with the "Tac Dash" and brother..... wiring is totally different on where the wires lead to on the tac dash meaning if you just plug the dash in the back of the gauges from a regular dash, the tac will melt or melt all those wires in the back. You have to use the wiring as well as the tac dash to make it work right.... trust me that I do know what I am talking about as those dashes are a little hard to find
Thank you for taking the time to share that info Mr Morgan, I did not realize the harness was that different. I will definitely do my homework and research before installing a tach dash. Be safe and have a Merry Christmas!!🎁🎄
I'm 33 years old and have never been mechanically inclined all my family is but me not so much. I've watched every video and lov3 them . Yall have taught me alotan I really appreciate yall ain't on here saying bunch dirty stuff. Everyone gets up set when then bang there knuckles our knee but yall r great thank yall very much can't wait for next video merry Christmas
Thank you for the awesome compliments and support! We definitely don’t know it all and are always willing to learn. Merry Christmas to you and your family friend!!
The way i alays dropped a distributor on a chevy was put it in with nuber one where i want it , let it engage the cam gear then spinn the engine to set oil pump rod, saves alot of headache
Now you stole my idea. I have viewed a lot of these will it start videos and have made the observation that people try chain wrenches and strap wrenches and pipe wrenches to try and pry these engines loose and the same tool you made for this application I had in mind as well. Beings I do not fool so much with these "will it run" projects it is not a priority to make such a tool but once the tool is made it will come in handy on future projects that include unsticking a Chevrolet engine of this vintage. A big mistake people make is they will modify such a tool for another application instead of building one from scratch. and of course, that disables the first application (unless there is some sort of universal tool made).🥸👍
Yes sir a friend of mine worked in the hydraulic shop at a heavy equipment dealer and he made a lot of tools that were specific for his work. the only thing is that when he went on vacation he would come back and find that the other mechanics that filled in for him would butcher up some of his tools to adapt to other situations and of course he had to make new ones. Talk about urge to kill!!!!!!@@KeyesKustoms
An this is why these trucks are the best cause no matter what u can’t kill an old 350
This is true bud, they’re tuff for sure!
Well that's great! No more mosquitoes in Lamar County, I seen them all headed south. The bad news is all the nats stopped by here to land on my new yellow paint. Ha haa! When you grow up and make it big on the tube you can be like Bad Chad and have a separate climate controlled museum for your show cars so you can have your shop back. And last but not least, you're welcome to use my EndoScope Camera anytime. Or heck, get Vevor to send you one ... would have made a great video and they would have loved you for it! Merry Christmas to ya'll.
I hope your right about the mosquitoes lol. I need to reach out to vevor and order me one, doubt I’ll ever be bad Chad status but hey a guy can dream!! Merry Christmas to you also Bob, be safe my friend.
That’s awesome. It’s a old Chevy it will run. Lots of work but definitely paid off . MERRY CHRISTMAS 🎄🎁 to you and your family may 2024 be your best year ever. Blessings 👍😎✌️
Thank you and merry Christmas to you and your family, we hope y’all have a wonderful and safe 2024!
Murvis from the Orlando Florida area keep on bringing those videos
Thanks Murrow, we’re working on it lol
Great will it run video! I was beginning to have doubts! But you persisted! Motor sounds strong! Great video guys! Merry Christmas and Happy New Year!!👍👍
I had my doubts too , thanks you sir and you have a wonderful Christmas and a happy New Year!! Be safe.
Glad to see you got it freed up and running
Me too Byron, I was beginning to think it wasn’t going budge.
Love you guys, have a Merry Christmas
Thanks my friend! We wish you and your family a merry Christmas also!
Merry Christmas 🤶 thanks for the video
Merry Christmas to you also , your very welcome
I am seventy four, twisted wrenches since I could get out to the shop with my dad and since was a mechanic ever since. I have owned so many square body trucks that you would be amazed. I have owned a good many with the "Tac Dash" and brother..... wiring is totally different on where the wires lead to on the tac dash meaning if you just plug the dash in the back of the gauges from a regular dash, the tac will melt or melt all those wires in the back. You have to use the wiring as well as the tac dash to make it work right.... trust me that I do know what I am talking about as those dashes are a little hard to find
Thank you for taking the time to share that info Mr Morgan, I did not realize the harness was that different. I will definitely do my homework and research before installing a tach dash. Be safe and have a Merry Christmas!!🎁🎄
SHE RUNS GOOD
Yay!!!!! The question is for how long??? 😂😂
I'm 33 years old and have never been mechanically inclined all my family is but me not so much. I've watched every video and lov3 them . Yall have taught me alotan I really appreciate yall ain't on here saying bunch dirty stuff. Everyone gets up set when then bang there knuckles our knee but yall r great thank yall very much can't wait for next video merry Christmas
Thank you for the awesome compliments and support! We definitely don’t know it all and are always willing to learn. Merry Christmas to you and your family friend!!
The way i alays dropped a distributor on a chevy was put it in with nuber one where i want it , let it engage the cam gear then spinn the engine to set oil pump rod, saves alot of headache
Me too but I was concerned about the oil pump shaft falling into the oil pan 😬
@@KeyesKustoms the oil pump rod is already in the oil pump, and jamed between the pump and dist. It aint going any where
Thank old 68 or 69 Chevy pickup you need to pull the starter off and work the flywheel back and forth
That was my next option if my homemade tool didn’t work 😂
Why put new fuel pump on it if pump is working a new one China junk one on there property a USA one
I’m going to clean it up first and make sure it don’t leak but your right about cheaper made parts these days 😔
Now you stole my idea. I have viewed a lot of these will it start videos and have made the observation that people try chain wrenches and strap wrenches and pipe wrenches to try and pry these engines loose and the same tool you made for this application I had in mind as well. Beings I do not fool so much with these "will it run" projects it is not a priority to make such a tool but once the tool is made it will come in handy on future projects that include unsticking a Chevrolet engine of this vintage. A big mistake people make is they will modify such a tool for another application instead of building one from scratch. and of course, that disables the first application (unless there is some sort of universal tool made).🥸👍
The tool worked better than I thought, I got the idea off the the internet. I need to build one to fit other engine applications. Thanks for watching!
Yes sir a friend of mine worked in the hydraulic shop at a heavy equipment dealer and he made a lot of tools that were specific for his work. the only thing is that when he went on vacation he would come back and find that the other mechanics that filled in for him would butcher up some of his tools to adapt to other situations and of course he had to make new ones. Talk about urge to kill!!!!!!@@KeyesKustoms