Ohhhh yeah, what a successful day off the trailer and in the 7s 🤤🤤🤤🤤 very good effort from all involved and so good to see Barry keep his huge shoe glued to the floor even once it got loose 💪💪💪💪
Since Castlemaine came to the states to do burn outs, it'd be fun to see if Cleetus would bring one of his cars there to show Castlemaine how his cars do the things that it does
@MrMysto could also help, but it's taking this car so long to get on the chip that it's gonna need everything possible unless they get a looser converter 😆 I've been in this same situation a few times and knew I didn't wanna change converters so I added dumps and then a small shot of go go juice if it was taking a lot longer at higher elevation tracks.
Not a bad start. The car sounds and looks solid. Take a peek at the second video off the line. Left side. That motor seems to move a lot. You can see from down low that exhaust pipe rise a good 3- 4 inches. Somethings moving around and that will tear stuff up with a quickness. Might wanna add a small nitrous plate to put her up on boost faster. Getting on the chip is taking longer than the runs are. All in all great shake down for sure.
Great video guys. Love TRS doing Quarter Mile stuff. Burnouts are good but nothing better than Aussie Built Cars that we grew up with & loved ripping down the Q Mile😉🇦🇺
Well done! Takes way too long to get on the 2 step though. Whats with the guys pushing the car at the start of the burnout? Looks a bit stupid and unsafe.
Thank you. interesting set-up. I think this, unique project shows what you are capable of. I personally brought my first bits from CRS in the 1980s from Rod Hadfield.
No surprise you have high trans temps with the 2 step taking longer than the pass :P
Yes mate get of the 2 step you muppet.
Was thinking that aha
Wonder if they thought about putting a dump valve on the converter to get it to spool faster ?
@@harrisonmorley895 if i was to do the same with my car, im sure it would dump a valve lol
Sweet as ,well done team lov the rawness on the day
Ohhhh yeah, what a successful day off the trailer and in the 7s 🤤🤤🤤🤤 very good effort from all involved and so good to see Barry keep his huge shoe glued to the floor even once it got loose 💪💪💪💪
Your not wrong mate, fingers crossed after a few changes / upgrades we can drop the times.
That 7.88 pass was a nice clean hookup and run. 👌
PSIDUP rear end doing the hard work there mate.
Frikn awesome stuff! Looking forward to seeing what Barry & the car can do.
It has to be the best mix of fast cars at one time I have seen. No time for 9's here.
The track was pulling right for everyone ,keep up the good work
Everywhere there’s fast cars, Dandy is there 👌
Awesome to also see the Dandy cars especially Franks XW!!
Might need some NOS to get it stage quicker and that might also help the trans temps
Since Castlemaine came to the states to do burn outs, it'd be fun to see if Cleetus would bring one of his cars there to show Castlemaine how his cars do the things that it does
Blue car needs a different converter or add some dump valves. Or nitrous to spool it up.
I was just thinking the same thing
Co2 on the wastegate
@MrMysto could also help, but it's taking this car so long to get on the chip that it's gonna need everything possible unless they get a looser converter 😆 I've been in this same situation a few times and knew I didn't wanna change converters so I added dumps and then a small shot of go go juice if it was taking a lot longer at higher elevation tracks.
Fucking epic cars! Best drag video for ages! Keep chopping!
Great driving baz
Not a bad start. The car sounds and looks solid. Take a peek at the second video off the line. Left side. That motor seems to move a lot. You can see from down low that exhaust pipe rise a good 3- 4 inches. Somethings moving around and that will tear stuff up with a quickness. Might wanna add a small nitrous plate to put her up on boost faster. Getting on the chip is taking longer than the runs are. All in all great shake down for sure.
Good effort Hall
great vid guys , congrats.
Big Bad Bazza💪Good work guys
I see frank has his boys there 💪🏼
That 2 step takes 3-5 business days 😂
Great video guys. Love TRS doing Quarter Mile stuff. Burnouts are good but nothing better than Aussie Built Cars that we grew up with & loved ripping down the Q Mile😉🇦🇺
Baz is a weapon
Well done guys great video love the VL would love to know exact colour ! It’s a beautiful colour 👍
im interested in this, but it was like it disappeared off the face of the plane. nice to see an update
It's been a while that's for sure! Hopefully we don't take much longer with the next test
Need to get hold of a BRP trans cooler best bang for buck!!
We want to see the REAL DEAL
What do you want to see us do with it mate?
@@CastlemaineRodShop1976 power skids
Twin turbo
Think i saw SBW behind that shed with the gloves on ready to hand out another flogging.
Well done! Takes way too long to get on the 2 step though.
Whats with the guys pushing the car at the start of the burnout? Looks a bit stupid and unsafe.
Any of these coming to grudge kings on the weekend?
Second the dump valve.
Someone needs to line Barry up with the track so he doesnt need to do a hook turn before the 60'
Must have the turbo Nissan motor in it😁
Why takes so long to spool up?
I like Turtles 😁
Where is REAL DEAL.. hanging out to see that run
Hopefully we can do some REAL DEAL stuff soon.
Thank you.
interesting set-up. I think this, unique project shows what you are capable of.
I personally brought my first bits from CRS in the 1980s from Rod Hadfield.
Man his voice is rough.
i was waiting for him to answer the phone and say "get stuffed Mick" lol
That torque converter is way to tight. Look how long it takes to get on two step
It’s tighter than a nun