I'm sad you've not posted much recently as I'm a mechanic myself and find it hard mentally sometimes and watching your videos actually helps and makes me think I'm not the only person having daily battles with everything
Got a few days off work using up my holidays just watching old videos, cant like them a second time so I decided to comment again. Always a great video Chris I do hope to meet you sometime.
BLOODY GOOD VLOG, WHAT A GOOD VLOG!!! 🤠 Thank you very much mate!! Your videos are amazing, you never fail to make me laugh & smile!! All the best to you & all the family ☺️👍
Did the wishbones and ball joints on a shitron grand picasso..... took me 3 days and had to buy a 41mm socket and grind 3mm off it as the nut was about 5mm deep and the chamfer on the socket wouldn't grab much of it 🙄 Also the 21mm wb bolt was seized onto the subframe. Oddly the one on the other side was 22mm 🤔👍🇮🇪
Nice work mate 😂, the Citroen/Peugeot van struggle, recently done the same broken front spring on mine,, could only find polish videos on yt,😂 sketchy shitttt with the £25 Amazon spring compress tool,, very sketchy.the gearboxes are made from some sort of chocolate, Worth changing the oil, another job they didn't think about,, Lots of metal on the magnetic drain plug 😂 Has made a huge difference tho
In the 90's and 2000's It was a pain in the arse going to a moto factors for any brake components for Shitroens and Peugeot's because with the vehicle manufacturing plants being so close if either manufacture ran out of brake components they would borrow off the other manufacturer and vice versa until they got their delivery then they would replace what they borrowed so the reg wouldn't give the motor factor any clue which brakes were fitted so you had to remove the parts to take with you so they could identify the correct part, it was a pain in the arse because you either had to get all 3 or 4 variants of pads or shoes or take the part off and match them up, I hated working on them.
Alot of work and driving back and forth on this one, I'd be knacked now at 62. My transit is lpg, had it for over 8years the oil doesn't look dirty but should be change from degrading anyway. Also Chris be very careful working under weightie things. My old jcb hose went last year oil everywhere all over my son too. Can kill you in an instant. Hydraulic company said yesterday someone was killed the other week working under a front loader in Wales. Take care Chris.
Well Chris, that was very entertaining when you did the hydraulic leak in Dave’s yard you don’t give a shit about getting dirty. You just get in there and it was so funny when you dropped your phone in the hydraulic oil then you picked it up and dropped it in the mud and water, that creased me up.😂😂😂😂😂😂 nice to see the young ones getting involved to😊
Afternoon Chris Great video Chris Good to see Little Joe the professional full bore struggler out working with you rather than sat at home on a game console Did Josh buy that van from Scottys yard the way it keeps braking down 🤣🤣🤣 Great work Chris and Joe See you on the next one Whooo whooo
Hey up Chris, I sent you an FB message about a moped, if this one you're getting doesn't work out let me know, I've got a Piaggio Zip that needs a new home 👍
I am convinced machine designers forget about people who try to fix plant machinery and design it in a way it is damn near impossible to repair. The spring on the van was just as bad 🤦♂️.
Yo yo chris l remember the days if fighting with hydraulic pipes I would love to meet some I'd like 2 meet sum of these so called engineers😂😂 keep em coming m8 PS GET A TRIPOD FOR YOUR CAMERA!!!
He wouldn't be able to polish off a proper Yorkshire Fishcake, which is basically what a Fishcake is supposed to be. None of the orange breaded hockey puck nonsense 🤣🤣
Check out "Sasqautch Chronicles podcast" Chris, he has Cops, forest service and veterans telling about Sasqautch encounters, I listen to it while plowing snow. Some of the stories will make your hair stand on end, some aren't great.
*Good morning Chris* , nice to see Josh helping out...he's a *good lad* , not scared to get his hands dirty and I've seen many a grown up with a clip board or piece of paper "knocking" like josh was and getting good money for it 🤣🤣 *Lovely to see Carl* get his MOT station up and running and I hope his Facebook supporters share the business and get him plenty of work 👏👏. Nice to see you donning your "top fixer and fault finder " hat on at D and J..... *You get the jobs that need patience and knowledge to sort mate ...two things many can't bring to a job* ! Oh and the *ability to slide in 10" gaps* 😂😂 I'm with you on Egyptian history and cover ups ... *Eric Von Daniken and Graham Hancock* are my two favourites on this....easy listening and so believable... Keep up the great work Mr Allen , Gary 🙏 🦉
The spring is sprung the sun is ris I wonder where the birdies is the bird is on the wing but thats absurd because of course the wing is on the bird!!!!
I admire how you get the kids involved teaching them real life skills fella well done keep up the great work
I Totally agree with you well said
I'm sad you've not posted much recently as I'm a mechanic myself and find it hard mentally sometimes and watching your videos actually helps and makes me think I'm not the only person having daily battles with everything
Absolutely love these videos buddy, teaching the kids the real life way, best on RUclips pal👍
Chris! D&J had that handler on nice dry ground, knew you were coming and moved it into the mud just to make you feel at home🤢
Nice Ona Chris👊
🤣🤣🤣🤣🤣
Got a few days off work using up my holidays just watching old videos, cant like them a second time so I decided to comment again.
Always a great video Chris I do hope to meet you sometime.
BLOODY GOOD VLOG, WHAT A GOOD VLOG!!! 🤠 Thank you very much mate!! Your videos are amazing, you never fail to make me laugh & smile!! All the best to you & all the family ☺️👍
Afternoon Chris……love that….Sam, 2 years hasn’t opened the engine cover, you turn up, 2 minutes, you mean this handle here,……lol. 👍🤣🤣🤣🇮🇲
It’s a dog’s life Chris!Brilliant video👍.
definitely the best channel on RUclips
Did the wishbones and ball joints on a shitron grand picasso..... took me 3 days and had to buy a 41mm socket and grind 3mm off it as the nut was about 5mm deep and the chamfer on the socket wouldn't grab much of it 🙄
Also the 21mm wb bolt was seized onto the subframe. Oddly the one on the other side was 22mm 🤔👍🇮🇪
@philippreitshammer for my sins, I'm Irish and the shitron is a friends car, he only bought it cos it was cheap 🙄 and he knows I tinker with cars.
Top marks for this one Chris keep doing what ya do mate 👍
The best channel along with daines-lowe on RUclips bar none...
I love it
Love the videos mate, vehicle mechanic in the British army myself. Still need some boots? 😀
Nice work mate 😂, the Citroen/Peugeot van struggle, recently done the same broken front spring on mine,, could only find polish videos on yt,😂 sketchy shitttt with the £25 Amazon spring compress tool,, very sketchy.the gearboxes are made from some sort of chocolate,
Worth changing the oil, another job they didn't think about,,
Lots of metal on the magnetic drain plug 😂
Has made a huge difference tho
Joey will make a good mechanic one day. He is such a good helper.
Oi oi Chrissy boy. Another top video mucka. Thanks for taking us along .
All the best
Steve
Awesome video thanks Chris very much appreciated top job 😁🇬🇧🔧🛠️🔧🛠️🚜🔧🛠️🚜🚜🚜🚛🚛
In the 90's and 2000's It was a pain in the arse going to a moto factors for any brake components for Shitroens and Peugeot's because with the vehicle manufacturing plants being so close if either manufacture ran out of brake components they would borrow off the other manufacturer and vice versa until they got their delivery then they would replace what they borrowed so the reg wouldn't give the motor factor any clue which brakes were fitted so you had to remove the parts to take with you so they could identify the correct part, it was a pain in the arse because you either had to get all 3 or 4 variants of pads or shoes or take the part off and match them up, I hated working on them.
Good video Chris, plenty of $hit jobs still coming in but no match for your struggling skills! Catch you on the next one, yeah you will! 🤠🤠
Alot of work and driving back and forth on this one, I'd be knacked now at 62.
My transit is lpg, had it for over 8years the oil doesn't look dirty but should be change from degrading anyway.
Also Chris be very careful working under weightie things.
My old jcb hose went last year oil everywhere all over my son too. Can kill you in an instant.
Hydraulic company said yesterday someone was killed the other week working under a front loader in Wales.
Take care Chris.
Chris, i stripped out the boot on my Corsa looking for the top shock mounts.
well hello there Chris we've missed you long time no see lovely to see ya bk really missed your videos 🎉🎉🎉🎉
Chris check the ring gear they are chocolate on those old Nissan engines. Sounds faulty to me . Done loads of them in the past
👌good stuff Chris! Bloody good show ,what ?😂
You always make the best of a bad situation. I never would have thought to take that dash apart 😮.. Good struggle Chris. Thank you!🇨🇦
Another cracking vid Chris and fair play to getting the young ones👍👍 involved
Brilliant video once again Chris nice to see showing josh the ropes well done
*CHRISSSS always put a bit of string around the hydraulic hose your removing to make refitting easier*
& cap the pipes off when pulling through dirt, stops problems later on.
Well Chris, that was very entertaining when you did the hydraulic leak in Dave’s yard you don’t give a shit about getting dirty. You just get in there and it was so funny when you dropped your phone in the hydraulic oil then you picked it up and dropped it in the mud and water, that creased me up.😂😂😂😂😂😂 nice to see the young ones getting involved to😊
Another great video Chris 👍 Hope you got a case of Fosters for that Citroen 😄
Cheers for this video Chris great as always mate 👍👌
Chris simply the best, yes he is
Chris + vans = a good laugh at Chris’s expense 😂😂
My Transit makes a noise when i drive it - Think it's the engine but haven't come across another that runs to compare it to ! ...
Afternoon Chris
Great video Chris
Good to see Little Joe the professional full bore struggler out working with you rather than sat at home on a game console
Did Josh buy that van from Scottys yard the way it keeps braking down 🤣🤣🤣
Great work Chris and Joe
See you on the next one
Whooo whooo
Another brilliant video Chris whoop whoop 👍👍👍👍👏👏👏👏👏👏
BLOODY GOOD SHOW CHRISS JUST IN TIME FOR MY DINNER BREAK 😂
Great video Chris and your little mate loved his fishcake that little dog has everything he needs.
Great video Chris until next time woop woop ❤
class well done mate 👍👍👍👍👍👍👍👍
Hi chris 21.10 I love how the traffic cone is holding the forks on the forklift up safety first 😀
Hey up Chris, I sent you an FB message about a moped, if this one you're getting doesn't work out let me know, I've got a Piaggio Zip that needs a new home 👍
Another great video has always chris and leahdag and family 👍
Another good channel to watch Chris is “jarid boosters” your dad would also love some of the old world photos he shows
Excellent as usual...
Brake pads spring and drop link...because that links gonna feck you up Chris 😂😂
Fantastic video mate well done stay safe all at the Allen Farm..👍👍👍😂😂🤣🤣🍺🍺🍺🍺
Had a V8 stage 1 Landrover converted to LPG the oil always looked like new
Bloody JCB Teletrucks... the fitters naughty corner on wheels 😂 horrible things.
LOVE IT CHRIS!!! TOP GUY !!!
anchor at nott'm cattle market for army boots mate
Bollocks to the fosters and pork pies come to Somerset for the bread cheese and cider , bring Josh
Anyone seen this man? He is missed dearly 😂
😂😂 I’m here mate! Just been doing boring jobs, posting soon WAYNE mate 😎👍
@Professional-struggler I get it brother, same 💩 different pile! Haha
9:38…
Pay as ya go
LMFCO … can't stop laughing 😂😂😂😂😂
3:55 Tbh that wasn't too bad Chris.
I am convinced machine designers forget about people who try to fix plant machinery and design it in a way it is damn near impossible to repair. The spring on the van was just as bad 🤦♂️.
Chris you are still the best channel on RUclips 😂😂😂❤❤❤
Love ya videos chris 👍
Cracking video Chris, keep struggling. Try and give leardag more breaks he is seems to work All hours
Bloody good struggle has always 💪💪🍺🍺
Hey Chris was u on the a6097 on 1/11 around 6.15 as I swear I saw u going the other way 😊
Chippy near us chris, called frying nemo
00:9 ye broom broom lol👋🤠👍blood y suspension.
BLOODY GOOD SHOW, THAT WAS CHRIS YEA IT WAS
Yo yo chris l remember the days if fighting with hydraulic pipes I would love to meet some I'd like 2 meet sum of these so called engineers😂😂 keep em coming m8 PS GET A TRIPOD FOR YOUR CAMERA!!!
Respect 🇬🇧
It's a struggle Chris bloody good Show 😊. I hate shitreon 😂😂😂.
He wouldn't be able to polish off a proper Yorkshire Fishcake, which is basically what a Fishcake is supposed to be. None of the orange breaded hockey puck nonsense 🤣🤣
11:48 thats my dad lol 😂😂😂
How you doing Chris, u ok? Keeping busy?
I’m here mate! Yeah I’m fine 👍 just been busy doing boring stuff,
@ 😄 Good to hear you’re ok Chris. Will be Christmas with the family soon. 😀
Check out "Sasqautch Chronicles podcast" Chris, he has Cops, forest service and veterans telling about Sasqautch encounters, I listen to it while plowing snow. Some of the stories will make your hair stand on end, some aren't great.
I wonder what greta turdburg would make of the tractor and its eco friendlyness 😂
wish you where closer to me just had a knightmare fixing my forklift credit to you mate
Why when anything breaks do they have to park it in mud😅
so you could say the turbo is operating at FULL BORE! 🤣🤣🤣🙄
why didnt you take the hole leg of the scrapper van
don't blame citroen that's a fiat van!
Could’ve sworn I saw this come out yesterday but then got removed 😢 happy days it’s here now tho 🎉
Chris two words, fu….. French shit sorry three words😂😂😂
Top job
I bet that ring gear has gone Chris that’s the Nissan engine and the ring gear is not the best , good upload you really deserve a pat on the back
Poor Chris you do seem to get all the shit jobs for sure! But no matter the job you get the job done right. 👏👍🇨🇦💕 Happy Birthday Archie 🥳🎂
Always charge accordingly fella with them jobs the bodyswervers avoid an extra £150 at least for the good for nothings.
Keep up great content could I get shout out Jay from Louth
hahaha there is loads problem on youre buss just leav it til u must fix it :)
theres a chippy by me called, oh my cod lol
Do you even fix lorry's anymore 😂😂😂😂
Joe Joe got Tekkers,hope Josh is weighing him in some Nelsons
Poor Bob ❤
Search 'calgary bigfoot' 👍
🤘😎🤘
*Good morning Chris* , nice to see Josh helping out...he's a *good lad* , not scared to get his hands dirty and I've seen many a grown up with a clip board or piece of paper "knocking" like josh was and getting good money for it 🤣🤣
*Lovely to see Carl* get his MOT station up and running and I hope his Facebook supporters share the business and get him plenty of work 👏👏.
Nice to see you donning your "top fixer and fault finder " hat on at D and J.....
*You get the jobs that need patience and knowledge to sort mate ...two things many can't bring to a job* ! Oh and the *ability to slide in 10" gaps* 😂😂
I'm with you on Egyptian history and cover ups ... *Eric Von Daniken and Graham Hancock* are my two favourites on this....easy listening and so believable...
Keep up the great work Mr Allen , Gary 🙏 🦉
How does that do so much work and still have time to look after the house 😂😂😂
Who just brought skinwalker ranch? USA government?
Pay as you go, when you use to ring your mates with 1 ring and hope they rung you back... yeh none of mine use to ring me back...:)
Remmber smily fronts transits use to pop in to see ya in the cab them springs 😂
Come on Chris less moaning more cracking on. 😉. At least you ain't fking with SAF axles lol 🤣
Worst fecking air filter housing in the world.....try getting the housing out Chris....can't wait for the swear words pal 😂😂😂
The spring is sprung the sun is ris I wonder where the birdies is the bird is on the wing but thats absurd because of course the wing is on the bird!!!!
Another day at D&J