Harley Davidson Road King Special Heated Grips Install
HTML-код
- Опубликовано: 4 окт 2024
- Servus my Motorbikefriends, today (and tomorrow) we are installing heated grips on a Road King Special. The install is schematic and I'm not win an OSCAR in the near future. Enjoy the wrenching.
More about the Rattlekiller on instagram easygrip_rattlekiller
Rattlekiller install video • Easygrip Rattlekiller ...
Rattlekiller Einbauvideo • Video
I just went to install my heated grips and would like to do the harness modification. On the right hand side accessory plug, there was actually a female white connector attached to it. So I would imagine I just need the bigger pins to do the modification.
My question is, would I be able to run a sound bar the same way with the other plug? Utilizing electrical connections that are already there, over running new wires back to the battery seems much easier/cleaner.
Thank you for the video. Can you provide more details for the wiring harness modification you used? I know you show the package, but I’m having trouble finding the exact match here in the US. More info and step by step might help. Possibly a link to the resource you used also?
Try 4 pin molex connector on Amazon.
danke dafür.... sehr instruktiv...
Sehr gerne, beim Zusammenbau lief uns leider die Zeit davon, weil es Probleme mit den Blinkern gab. zur Not den ersten Teil rückwärts anschauen...
You didn't show the fitting of the new left hand grip onto the handlebar. This was a major pain! After thoroughly cleaning the handlebar I couldn't fit the grip and, worse, the assembly kept coming apart. I had to apply some silicone grease to the *inside* of the handlebar. When you reattach the controls housing it holds down the grip so it doesn't move.
Also fun was finding a key-fob-enabled and switched source for 12V, but in my 2016 Road King I found it in a black and grayish wire housing that wasn't connected to anything. After some splicing, now it is.
Are BMWs more rigorously engineered?
Hi Wes, I’m sorry to hear. We had no issues in reassembling the righthand side, that’s why I kept it so short. Do you still run genuine HD bars? Normally the play is so big that you definitely need no lubricant. Check that the switch assembly is seated right against both halves of the switch housing.
Enjoy your warm hands!
@@stefansgarage3014 Yes, stock mini-apes.
@@BegoneJonah In my Easygrip Rattlekiller installvideo, I cover the heated Throttlrgrip in more detail. I still have no clue what went wrong with your install
ruclips.net/video/cjuGEq5IVzg/видео.html
Hi Again Stefan, Ive purchased the auxiliary power harness for my pending heated grip install on the same bike you used here, however I like the idea you have implemented using the existing available connections. Couple of questions I have before using this method is, What circuit are you plugging into using that stock connector( can you also confirm the factory wire colours on the plug you used please? is this plug fused and where is the fuse located please? Keep up the good work, regards Danny
Hi Danny, I’m sorry it was a customer bike. So I don’t have the wires. It’s the auxiliary lighting connector, so it will only work on RK Special. You need to get a DC Meter to check the voltage as there are three pins.
Hi Stefan, danke für das Video. Es hat mir absolut geholfen beim Einbau der Heizgriffe. Ich hatte noch ein PC Stromkabel Adapter aus alten Zeiten mit dem ich auch einen Anschluss an die weissen Stecker gebastelt habe. Ich habe noch eine 10A Sicherung dazu gemacht. Muss man den linken Griff festkleben oder reicht die Verschraubung? Danke
Sehr gerne, Verschraubung links reicht völlig. Schau dass der Stecker sich nicht von selbst lösen kann, eventuell mit Tape zusätzlich sichern
Hi!
Thanks for a great video!
I have exactly the same Kahuna grips that I want to install on my RKS 2017.
I have an odd (but maybe easy) question as I've searched my answer all over the internet to no success.
My right hand grip was delivered with the cap plugged on covering the connection.
How do you remove this end-cap? (I don't want to break anything so I've just tried screwing and pulling by hand.. )
Biker regards from Sweden
Watch my Easygrip Rattlekiller installvideo, I remove the plug there. Just fingernails and some pulling on the Kahunas.
@@stefansgarage3014 Perfect! Just the answer and video I needed!
@@chrillea1955 Great, enjoy your warm hands!
Hallo Stefan, hast du villeicht den Forumbeitrag wegen der verkabelung? Bin grad am basteln bei meiner 2020 Street Glide.. komm irgendwie nicht weiter
2020er Street Glide hat die Kabel für die Heizgriffe schon fertig unter der Verkleidung. Da muss die äussere Verkleidungsschale für runter (die drei oben an der Scheibe und die 2+2 auf der Seite)