JUST TRANSFORM IT!: Siege Voyager Starscream
HTML-код
- Опубликовано: 24 авг 2024
- WATCH THE FULL REVIEW HERE! - • Siege Voyager STARSCRE...
JTI Playlist - • Just Transform It!
Get Transformers here! - www.bigbadtoyst...
Check out EmGames - / emgames316
Check out LoriPlan - / loriplanreviews
Twitter - / emgo316
^^^^^^^^^^THE FULL REVIEW IS LINKED IN THE DESCRIPTION^^^^^^^^^^
emgo316 have u tried putting a pin of your own to hold that loose plate in place?
ruclips.net/video/Sbe351xIDRQ/видео.html Siege Voyager STARSCREAM: EmGo's Transformers Reviews N' Stuff
@@jasonirelan4487 The Cyberyronian OG 'Tetra' Seeker mode / mold.. Pretty complex for A mass produced Hasbro Voyager Nootch. Esp the arm transformation- Smart.
I must be old, i so needed this video. Thanks for the save.
I’m kinda late picking this one up and I may be just transforming incorrectly because I haven’t seen else doing this, but I’ve noticed the grey piece on the back of starscreams head has two tabs on the sides of it. If you keep it straight out from his back rather than tucking it in, the shoulder pillars have cut outs on each side that catch those tabs and it then fills in the space between his back and the wings.
I just got this thing on Amazon and OMG you’re 100% right! Otherwise, when I push in the pieces that stand up behind his shoulders, his head tilts back and it never fits right. It’s way too hard to rotate the piece out from inside his back, showing it’s not supposed to go that far back after you disconnect it from his head. If you make it horizontal rather than pointing into his back, it fits perfectly, everything is more secure, and his head doesn’t tilt back. Thank you!
bro 6 years of owning this figure and I just realized that.
When the yellow pilot cockpit don't have any function and ends up as a kibble in vehicle mode is what turns me off
Mung Seldou I just picture the windows being like their eyes in vehicle mode so you could think of it as like a rear gunner bubble or viewport and swivel the guns to the rear to shoot down any pesky autobots following close behind
Apparently mine one's chest keeps on fall apart when you do the step so I just remove and leave his head a little bit exposed
I really appreciate the JTI videos. Comes in handy whenever I get a new Transformer. Keep up the good work!
thanks for help dude, fish army will rule the internet
The instructions are hard to read since it’s basically black and white so this definitely helped
oh okay, he's a viper from Battlestar Galactica. That explains why humans lost the war.
i'm 42 and had to have help transforming Starscream in 2019. god please save my soul!!!!! Thundercracker is up next!
Im 43 and have same problem lol
Thank you Dude! Was absolutely clueless as the instructions booklet came in two color without written instructions. You video was absolutely saver!!
Starscream has become a Viper from Battlestar Galatica. Pretty cool.
Got this lovable fella for Christmas! Thank you so much, the directions were impossible for me to understand ❤
I just got Thundercracker today. Hooray for spotty waves up here in Canada after the first wave of any line. I honestly don't think I could have transformed him without this video. First problem was figuring out how to pull the backpack so that it would pull away so the nosecone can be formed. The other issue I had was I couldn't get the legs figured out until I did it while following along with this.
Nice, but they should have incorporated his robot mode's chest into the seeker design somehow, instead of just putting it on the back when in seeker mode.
I know it supposed to represent the g1 seeker but it looks more like the fighter from battle star galactica.
I thought the same thing. "Hey's that's a Viper from BSG!".
@@brainspider Oh lord, it DOES. Which.. I actually approve :D
@@ironraptorstudios Me too, excellent design and I want this one for my collection.
I wanted to just fumble around until i got it but it felt like i was gonna break it :/ edit: i also thought saw starscream on the package and presumed he was the fighter jet, i was very wrong
Instructions unclear, head won't fit into the back
I didn't see any chest plate problem that people were reviewing about. Thank you for this.
They’re probably talking abt the back of the ship where his chest plate/cockpit is just exposed
Bot mode looks awesome with the back thrusters.
Idk I’m really torn on his “jet” mode, I love how it’s pretty much a Star Wars ship with starscreams paint job, but the bottom is a bit rough lol though I’m not sure how you could make it any more compact than that, so it’s still pretty cool all things considered I suppose
More cybertronion
It would be more “screen accurate” if the bottom was just flat from wing to wing.
Thanks for this Video! Damn Starscream looks Dope in both forms! I absolutely LOVE the Terta-Jet form! Soo glad I decided to invest in the Siege line! Thundercracker and Skywarp up next!
Just picked up from a Ross store and had to come here. Guns feel more secure mounted on the blue portion of the arm. Thx for this video!
Got this figure for my birthday today, thansk for the help!!!
Thanks man needed this
Thanks dude, neded to check if I was gonna end up snapping the damn thing's head off while TF'ing it XD.
This music reminds me of a 90s Disney movie like a prank scene where some kid is setting booby traps or some other kind of sneakery.... is it bad I can hear "second verse same as the first" on some of the steps? Lol. Good one 👍
Great video. Thanks. Save time looking at instructions that are hard to understand
Im gonna attatch astrotrauns carrage to his thrusters. Give him a cape.
Nice video 👍 the dark grey and purple instructions included with the figure were confusing
Thought this was a robot to vehicle mode not Asmr while doing transformation
it makes me think of star wars
Seriously, reminds me of a Battlestar Galactica viper...
0:44 I just broke his arm doing this 😟
Thank you for this demonstration/how to video. Much appreciated.
From a frustrated gramma. Thanks
In this Pandemic is most need it. Thanks for the video!
Thanks for this video.
I just got mine yesterday. I'm too lazy to look at the instuctions. This video helped me.
Thanks
Thank you!! Saved my nephews Christmas😂😂👍🏼
Arcee all over again 🤣
I'm happy that Hasbro brought us the Tetra jets 😀😊
Thanks for how to transform starscream
THANK YOU
I know this video is old but I just got this figure today and the back peice does not want to stay on at all during transformation I try to put It on and it just comes right off instantly,I know he addresses it in the review but mine seems worse.
Edit: by back peice I mean chest peice.
It may be just me, but I have trouble pulling the two parts that make up the nose apart. It takes quite a bit of force before it eventually budges.
So grateful for this video !!!
Thanks for posting. Your vids are incredibly helpful. Instructions are garbage.
This was incredibly helpful. Thanks!
My child hood...
Ah yes, the tetra seeker- I saw someone else's review - he had all 3 main seekers plus all 3 coneheads. Wow.
More Than Meets The Eye pt1
Hi emgo are you getting a note seak his name is skywar in the seige line.
Battlestar Galactica
Rip me I just got this guy and his head wouldn’t go down during transformation so I cannot transform him ;(
It will, you just have to fight with him. So stubborn I was actually legit worried about mine breaking and there's still clicks that I couldn't get because of it. I think emgo316 has transformed his a few times...
I had to force mine down and then stick a Lego lightsaber through his front torso to get it back up
my favorite shellformer:)
Please make a video for Double header
On my figure the left panel wont tab in to the nose of the tetrajet properly. Any fixes?
I like it more wen you talk
It's not the best Cybertron G1 vehicle mode. It's difficult because they wanted to retain a G1-esque robot design but it comes at the cost of the vehicle transformation where it doesn't work quite as well. A decent figure overall, but could've been better. Like I wouldn't pay full price $29.99 for it. $14.99 at most.
What music is this in the background?
You should transformers TE-01 for me I’m trash at it
But I never bought it :(
Is there some kind of trick to getting the head to fold into the torso cavity completely? I can only get it to go part way inthankfully it doesn't seem to effect the transformation to much.
Shaun Blyth I hesitated at first bc I didn’t want to damage it but you literally just push as hard as you can and it will go in eventually
@@benc8422 I hate stuff like that on transformers were you have to push or pull something as if you basically intend to break it.
Its sad to see that transformers have been losing their complexity
define complexity
@@yeojin4thgenmainslayyer898 A transformer that takes you an hour to figure out because you can't work out how to move a certain piece or get it back into it's out of the box mode so you eventually relent and use a youtube video because the instruction sheet is useless
Sarcasm... Well timed.
The _SIEGE_ Seeker Tetra-Jet mode arm transformation alone, seems pretty new, smart & complex to me. For A mass produced Hasbro voyager toy anyway.
Can anyone help me on how to fix
Can somebody please fill me in on what the siege line is supposed to be. I see that many figures are very g1 esq but I don't know where the line came from
G1 Cybertron style
upcoming Netflix series
@@Gamealism no...
Soundwave Superior yes
Starscreams chest mine won’t stay
Charles Baldwin when you pop the head back that little plastic but pops up attach it to that he did that already but i had the same problem
The print instructions absolutely suck. Horrible views and arrows that don't actually show you what to do. Ridiculous.
This is just a shell-former. I'm very turned off.
Thanks