Supreme Process // A Thoughtful Mechanic Repaired Broken Wheel Axle From State-of-The-Art Skill….
HTML-код
- Опубликовано: 9 фев 2025
- Supreme Process // A Thoughtful Mechanic Repaired Broken Wheel Axle From State-of-The-Art Skill….
#supremeprocess#thoughfulmechanicrepair#Brokenwheelaxle#pkprocess #state-of-the-art
You are very talented.🙏🙏
Хороший станок у тебя береги его!!!
Whith this technique you create more risks than avoiding them. There are ares inside the axle that are not welded. I would weld only 2 Parts (left and right) and these parts are conically formed (like spears). Every iron part of the axle has to be 100 % bound with another. This is imo a suicide axle. Maybe i am wrong, but i dont´believe.
Agreed. Of course its not going to be used . Not even the splines will fit.
@@sylvabak53 Ironic does´nt make the axle better
😂 of@@sylvabak53
e5260
Well they have been doing it for decades...guess it works for them...gee they have 60 year old Bedford trucks on the road
Первый раз вижу как токарь фрезерует классно!!!
If the truck can twist and snap a forged part then a bit of metal welded on ( a bit, no penetration ) doesn't stand a chance, just making it look like it's fixed doesn't mean it is, I'm surprised they even bother wasting their time on these type of repair, unless, it's just to limp the truck empty to get a new part. It would be good to know the full story on these things.
I would like to know also. The power that was used to twist those splines has to be huge.
Tested in thier country only disagree is those doesn't know this machinist doing, only western disagree is this job but its work for them maybe
@@regorbatang3886 People phoning scamming people is a job that's doesn't make it ok.
In fact they make more money filming these fake restoration videos, than working on real orders.
Bravos, avec cette technique les gars!👏🏻👏🏻👏🏻
Мастерство не пропьёшь!!!
раньше смотрел камеди клаб с гариком и батрухой ,а теперь токарку из Пакистана
الحمدلله جميلة التقت اخوها رضا وحسين عمل مليح ربي يوفقهم
Работать будет. Но, не долго😂
A why not put a video together and show us how it should be done. Can’t wait.
The way he joined all pieces together might work in slow moving low torque application. But in a big truck, there is a tremendous amount of torque on the axle. I don’t think would last long . But it might ? Because the way he recut the spline, doubtful that it ever go into the spider gears !!!
But I give this an A for effort
Wall art. I often watch these and wonder how long these repairs last. Their HD trucks are run as unregulated, always overloaded, consumable tools. I'd be curious to see the circumstances which caused this failure. As others have said, this has a fraction of its original tempered torsional strength. I'd pay to see that still fully loaded truck as per usual, click granny and sidestep that clutch into traffic.
PK Process specializes in turning scrap metal into vastly more expensive scrap metal. None of his "Repairs" will ever be fitted to any vehicle.
This is just another "Click Bait" Bodge that is done just to generate income from RUclips.
This will fly apart. It will snap. To many unwelded areas. I’m not sure a thick collar would help it either. Welded makeup
I usually make a deep V groove and then weld such broken axle driveshaft , a light surface weld won’t last long.
Разлетится ваша конструкция при первой же нагрузке на ось)))
И восстановленные шлицы останутся никем неопознанными в куче металлолома в другом видео про переплав и отливку.
je serai curieux de savoir le temps que sa va tenir et le reste des cannelures dans le différentiel c'est pas mieux pour moi même pire enfin c'est vrai vous etes des vrais mac caver pas comme nous . nous ont est des consommateurs de pieces , mais chez nous aussi sa tien et meme le tavail de reparation en mecano soudures et usinages
Big job
How many surface feet per minute was the lathe operator running? ALL OF THEM!
I'm impressed with your handiwork
Руки золотые и голова и сварщик и токарь , нитошто наши рукажопы
Hola una sugerencia cuando llega el cliente porque no tener una mesa para allí discutir el asunto ho trabajo que se realizará.disculpen saludos y asta luego
نسبت به کارهای دیگر که بنده در کلیپ های پاکستانی دیده ام ، بسیار بسیار بهتر است اما اگر قرار باشد این محور زیر یک کامیون جاگذاری شود ، بعید بنظر میرسد که کارایی داشته باشد چراکه کی انحراف و اندکی عدم اتصال در دو بخش جوش خورده به هم ، که کم هم نیست ، موجب پیچش و شکستگی مجدد محور خواهد شد. سوال میلیون دلاری این که ، مگر نمیشه این محور رو نو از بازار تهیه کرد؟
Super jest to zrobione i odrestaurowane pozdrawiam serdecznie. 👍👍👍👍👍👍
А сверла сам затачиваеш, смотрю стружка правильная выходит
На таких оборотах и всё ещё живой.
надеюсь машине хватит этой полуоси скатиться с горочки до магазина запчастей или приемки металлолома!)))
This guy has some good machining abilities.
But this...just no. No weld prep areas?
Hope it was made for a bicycle and nothing heavier. Sorry
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Very good!
A lot more complicated than the bore- thread and weld method which has a lot more penetration.
That's the most idiotic way of mending severed machine parts especially if they are to spin. The outer portion was welded but still, there were gaps deep into the core of the shaft.
A better way of doing this is to shape both tips like cones at 60 degrees (the sharper the tips, the better). Then position them so that both tips meet and weld them from the core, carefully filling up the gap until the weld is a bit bigger than the radius of the shaft. Then grind and smoothen up the welded portion.
salam vean y aprendan
Интересно нп сколько минут работы хватит этого псевдо ремонта.
First time I saw this technique, I don’t think is reliable, it looks that the welding area is kind of weak, the way I see it, that repair is not going to last long.
👍👍👍👍👍👍👏👏👏👏😁
Hola amigos excelente trabajo muy bueno como ninguno
Restauro para inglês ver.
Bhai sahab Ek Excel mein itna kam karna iski kya guarantee FIR Nahin tutega kitne rupaye ka kam hai yah
If the New part broken this go too
Devi usare gli occhiali capito 😢😢
Suaranya kalau bisa jangan di samarkan dan gerakannya di buat seperti biasa
Трое иааааааааа
Please disregard my last post
Why do'not use culant
Como asi
This won't even last a day this truck owner is FIRST clàss IDOT
👎
Циганьйо одним словом😂😂😂
Sh!t, thats looks worst than the threadded wersion xD Vid sent to uk family and posted from that country for larger ranges. They just making money from ads watched by us for watching those crap.
🙈👎🤷🏼♂️
انت تحتاج لهذة المخرطه وليس المحور
Cosmetically it is good technically it is unsafe to use.
يبدو هدا العمل غير متقن ولا يدوم طويلآ بصراحة عمل غبي
Fake work.
Elfog törni egysoros hegesztes
What a lot of you guys in the state don’t understand is these people in Pakistan don’t have the option of always buying new parts when something breaks. They have to repair it to the best of their ability much like our ancestors did. These machinists are much like our early blacksmiths we’re. Will it last forever, no . Will it last until they can do better, absolutely. We are spoiled in the states being able to buy good quality parts. Try buying some of this Chinese made crap and see how long it last.
I’ve made repairs like this on dirt track cars just to last until new parts came in. We finally replaced them them with the new parts after the season ended getting prepared for the upcoming season and kept the old parts for temporary repairs if needed.
Ha ha ha that has to be joke the why he made the gear at the end of the video