B Hall is so humble! I swear we all need to learn alot from this man! Amazing work as always he puts out! Hope your having a great day man! My hat's off to you sire!
Such good work, Bhall is a damn artist. I'll bet there's loads of people who do his job daily but don't grasp how these cars go together like he does. Can see it; all the joins and transfer of force are in his head man; he knows how this whole thing's supposed to work.
Man the skills you guys have from just improvising is dope! Just seeing B just looking at that gap and figuring out a game plan so quickly is insane to me. Awesome job guys
Hey guys, resident hobby blacksmith. Just go to a machine shop and offer to buy one of their excess hunks of metal. You want something hard and flat. Once chained to a stump it works great. I combine that with the stow away no weld forge made by Essential Craftsman. If you absolutely need a horn you can either grind one out or get the cheap mini anvil from Harbor Freight. I've used it to make some tongs and its not bad.
Got into this channel recently and started catching up. Mad props on all the fab work in this build. B-Hall really showing off some pretty under-estimated skills, attention to detail and mad professional mindset from that squirrel's nest on his dome. Def echo a sentiment thrown out in a lot of these comments and feel Jimmy and B-Hall are some unsung heroes in the RUclips auto content game. Flexing some mad skills with this over the top (and mildly unnecessary) heroes build for the JDM crowd.
Hey you should put all the RWD Honda vids in s playlist. I'm wanting to RWD swap my Jetta and with Quarantine I got the time 😂😂😂 if you do that I'm binge watching all of them.
I don't think it's said enough: GREAT WORK BRIAN!! Dude that is amazing. You are a master of your craft man, I can't wait to see it done and I really want to see this thing in person one day, because it is a one of a kind!
Easiest way to make the bellhousing portion of a trans tunnel is to weld 3/8 round rod to all the seams or corned connecting the too then lay cardboard over it and trace it from the bottom. Then you have a backing bar were the sheet metal but weld together it way stronger and easier to weld
I severed the tendons in three of my fingers on my right hand working with rough cut sheetmetal... Guys please atleast wear gloves! I'm looking at 5 surgeries, a year or more of physical therapy, and shit ton of medical bills.
I think you guys should take this thing too sema. It truly is a testament to what a couple guys can do in their garage without all the money in the world 🔥
My work is currently in the process of moving shops, and I was so stoked to see a new Jimmy O upload to be able to watch while I eat lunch!! Keep up the great work guys, Nissonda is gonna be so sweet when it’s done!!
Great work as always! you two need to hit up your boy Adam and get you in with Cleetus, not enough of his fans know about your channel and you guys are killing it and deserve more youtube dollars, aka subs
Make yr own Anvil out of some Railway line, grind end into oval an other end into a gradual V. Works an cost $$$ time, it will last forever an give u guys alot help shaping sheet steel.🤙
Awesome work Brian! Would be great to see you have some proper metall tools/machines. Like an english wheel and a bending machine and a proper solid bench of steel. With the project builds you guys does it could be a notch higher outcome and mostly some time savings. You do awesome work with what you have. Looking forward to see the finished results as it will be amazing! And so fun to see other way around swap to what's usually is done. Keep whacking on LOL
I'm doing something like this to my Sunfire. I'm swapping out my 2.2 and 4T40 for a Hyundai 2.4 engine and a Ford AOD-E transmission, as well as a Ford 8.8 rear axle. All of these parts are gonna come from junkyard trucks and cars since brand new stuff is a lot more expensive.
Hey sup Jimmy Oakes From SW Florida have a nice day man and keep making more RUclips video it is very good and I like it a lot and i Love your car and be safe My Friend ?
You can find anvils at yard sales at stuff alot cheaper if your lucky I got my dad to get me a little one cuz I was destroying his scrap break rotors trying to blacksmith stuff
@@dorsch250 There are plenty of cheaper options, Harbor Freight even sells one for like $50, but you get what you pay for. Consider that an anvil is one of a blacksmiths most essential tools and it's not as outrageous. An empty toolbox can cost the same to put it into better perspective.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
The automotive world does not give you two guys enough credit.. unreal work as always from B and yourself. 👏🏻👏🏻
so true. what they do on this channel is heaps above what most others are doing. i dont understand how hes not at 1mil subs yet
Devive couldn't agree more. 🙌🏼
It's because they are stancy boys at heart
Matthew Heal They have the balance we all want between fucntion and form 👏🏻
@@PhantmZero They will get there! & The ogs will be here to witness it!
Jimmy: " you know how easy it is for something not to look straight"
First thought in everyone's mind : RJ
Tom Pittsley HAHAHAHAHA
😁😆
Zing.
BHall's allergies must really be acting up.
Thats what i would say too....
Yeah poor guy is allergic to weed
@@X1XBlackbirdX1X 🤣
You must not weld ever. I always get a little bit of red eyes from the gasses when you weld a lot all at once
@@carsnquads or maybe Brian smokes pot.
"2 guys hammer a trans tunnel"
youtube: yeah ..... we're gonna go ahead and demonetize this....
Demunerate
@@_moon_eyes two hammers one guy
For real though didn't even think about how there weren't any ads😂
😆
Someone get these men an Eastwood tool sponsorship! If anyone deserves it, it's Jimmy and B-Hall.
I just can't wait until it looks perfectly stock from the outside and then they rock up to meets and do burnouts or something
Mindfreak everyone by staging up at the the drift event in a Civic lmao
Ain't nothing like wackin with your boys
B Hall is so humble! I swear we all need to learn alot from this man! Amazing work as always he puts out! Hope your having a great day man! My hat's off to you sire!
8:25 B makes a tiny mistake and looks completely devastated. I thought it looked awesome anyways!
nah he was just stoned
Brian does such amazing work on this project that you should pretty much hand him the title when it’s done.
All this beautiful metal work needs to be shown to the “builders” of Sema
You spelled "assemblers" wrong.
Such good work, Bhall is a damn artist. I'll bet there's loads of people who do his job daily but don't grasp how these cars go together like he does.
Can see it; all the joins and transfer of force are in his head man; he knows how this whole thing's supposed to work.
Me: Dreams of a K24 S13 coupe
Jimmy: Lets do the opposite and build a KA Civic
@@TheDjdrock that would be a huge mindfuck but I'd dig it
Hert has a k24 s13
@@TheDjdrock r/cursedcomments
silven412 More like r/blursedcomments
@@dariok9118 more like this isn't Reddit
@B.Hall get a piece of railroad track. Makes for an perfect anvil, especially for sheet metal.
OH SHOTS FIRED! rip Illiminate
B hall here with almost all of his cars running and driving
Meanwhile Jim keeps breaking or taking apart his cars lol
Man the skills you guys have from just improvising is dope! Just seeing B just looking at that gap and figuring out a game plan so quickly is insane to me. Awesome job guys
It's actually insane how much custom fab has gone into this.
Hey guys, resident hobby blacksmith. Just go to a machine shop and offer to buy one of their excess hunks of metal. You want something hard and flat. Once chained to a stump it works great. I combine that with the stow away no weld forge made by
Essential Craftsman. If you absolutely need a horn you can either grind one out or get the cheap mini anvil from Harbor Freight. I've used it to make some tongs and its not bad.
8:12 I see we are starting off the month of 4/20 correctly
Stone bags
Yeah we are 🔥🔥
Hilarious
That’s a great build so hyped to see it running
Tofu
Rosette weld, is the word everyone was looking for. Awesome build guys!!
B hall is a straight beast... the man has talent. These two guys can build some insane stuff
Shout B.Hall and his witty banter. He's the hardest worker and greatest homie ever.
B Halls fabrication skills are an absolute gift! Great work guys super stoked on this one.
You can also use a small section of railroad track instead of an anvil. Just needs some wearing in to be perfect!
Got into this channel recently and started catching up. Mad props on all the fab work in this build. B-Hall really showing off some pretty under-estimated skills, attention to detail and mad professional mindset from that squirrel's nest on his dome. Def echo a sentiment thrown out in a lot of these comments and feel Jimmy and B-Hall are some unsung heroes in the RUclips auto content game. Flexing some mad skills with this over the top (and mildly unnecessary) heroes build for the JDM crowd.
Let’s get a go fund me started for Brian. Just for life. The good man deserves it.
I never knew how long it takes to do descent sheet metal work until I recently built a firewall and trans tunnel and it took me like 100hrs. Lol
2:32 wtf lol Bhall was definitely one of those kids that flipped their eyelids up at school
LMFAO 😭
B did a great job on the trans tunnel really liking this build definitely cool to see something out of the ordinary
Hey you should put all the RWD Honda vids in s playlist. I'm wanting to RWD swap my Jetta and with Quarantine I got the time 😂😂😂 if you do that I'm binge watching all of them.
Yes please ☝️ this
I don't think it's said enough: GREAT WORK BRIAN!! Dude that is amazing. You are a master of your craft man, I can't wait to see it done and I really want to see this thing in person one day, because it is a one of a kind!
Easiest way to make the bellhousing portion of a trans tunnel is to weld 3/8 round rod to all the seams or corned connecting the too then lay cardboard over it and trace it from the bottom. Then you have a backing bar were the sheet metal but weld together it way stronger and easier to weld
I severed the tendons in three of my fingers on my right hand working with rough cut sheetmetal... Guys please atleast wear gloves! I'm looking at 5 surgeries, a year or more of physical therapy, and shit ton of medical bills.
Ae86 Hachi I agree man hopefully they see this and I hope the best for you bro
Dont pull on it
@@stevengomez8304 facts
Were all not dumbasses 😂😂
Ain't no bitch fingers over here
I think you guys should take this thing too sema. It truly is a testament to what a couple guys can do in their garage without all the money in the world 🔥
B hall here's some words of wisdom for ya.... "Love what you live, live what you love."
~homeless guy picking up butts behind my work
He musta really liked smoking. 🚬
My work is currently in the process of moving shops, and I was so stoked to see a new Jimmy O upload to be able to watch while I eat lunch!! Keep up the great work guys, Nissonda is gonna be so sweet when it’s done!!
8:12 When I heard that *Dink* sound that it maked when B hit his head, I almost choked on my beer :D :D :D
🤣🤣🤣🤣
Best part was that he is so stoned he did not even flinch a bit. 🤭😁 Maybe did not even notice anything 🤣🤣🤣 he is the best dude around there
Sometimes it's not what ya kno it's who ya kno
Best channel on RUclips right here, no cap
Boss progress. Love watching BHall do werk. Makes me feel like mere mortals can do it. We all know the truth though. 😅
Man I love B Hall even though I don’t know him lmao. He’s the definition of getting shit done the right way and making the best with what he has.
Great work as always!
you two need to hit up your boy Adam and get you in with Cleetus, not enough of his fans know about your channel and you guys are killing it and deserve more youtube dollars, aka subs
You guys should hit up Alex Steele to inquire about an anvil and some blacksmithing content. Would be really cool to see you guys collaborate.
Man Jimmy's NE accent/talk style really coming out in Quarantine!!!
Bryan is literally the G.O.A.T! That mans is literally a metal working GOD!
Leave the fab work raw or polish it. Actually the best build I have seen in such a long time. Love it
One of your best videos because it demonstrated true talent.
NEW SHIRT Jimmy O's Tack & Wack Fab !! With a pic of a hammer a welder.
B hall def needs to make a suit of armour!!!!! Would be badass
3:17 “I’m tryin it’s flappin around like a flag on flag day” 😂😂
Finally some nissonda content 🔥🔥
Hope all the boys are doing well! And staying safe!
Jimmy and B Hall killin it!! Keep up the great content!!
I wish I had a place to do something like this! Keep it up Bubba!
Impressive it is, being a maker is one of my most favorite traits, so satisfying 🎯
That's a really ambitious project, you guys did a very good job! I like that
One of my favorite channels on RUclips!! Really fun to watch! Keep up the good work guys! 🍻
Make yr own Anvil out of some Railway line, grind end into oval an other end into a gradual V. Works an cost $$$ time, it will last forever an give u guys alot help shaping sheet steel.🤙
Rohan Berry I've heard of this idea before but where do you find some? I've never seen any for sale
pls sponsor our boy Jimmy O some plasma cutter, bending tools, CNC machine and etc.
Ahh B.Hall... you should totally make a life size Iron Man suit! It would be sooo sickkkk seeing the progress too! 🙌💪
Yeayy!! They touched it again! Lol
Omg who hasn't been keeping up with nissonda it's my favorite car on the internet 😍😍
Awesome job jimmy and b Hal honestly love the content. Keep the bangin vids comin
Nice CAD work at 4:12 👌
Hell yeah brother
best channel i have subscribed with. cant wait to see your channel grow jimmy specially with a million sub. 👌
B Hall is the man, great job man
Always a treat to see BHall work!👍
B is the man!!!! Very talented dude
First thing I do to a Jimmy O video is hit that like button, already know its gonna be fire 🤙🤙
Bad ass work bro keep it up really good to see these type of projects being done.💯💯💯💯
these videos never fail to make me smile
such an underrated channel where the mil subs at!
That takes some proper skill and finesse 👌🏼👏🏼
Pick up the Eastwood shear tool, perfect for all the little stuff you’re cutting out.
Was watching your old content and had to take a break to watch this :D
Thank you for providing us with dope content while most of us are stuck inside!
Oh yes, been waiting since i saw the Instagram stories 🤙🏿
Awesome work Brian!
Would be great to see you have some proper metall tools/machines. Like an english wheel and a bending machine and a proper solid bench of steel. With the project builds you guys does it could be a notch higher outcome and mostly some time savings. You do awesome work with what you have.
Looking forward to see the finished results as it will be amazing! And so fun to see other way around swap to what's usually is done.
Keep whacking on LOL
B Hall is the absolute man 👌💪💪💪💪
Man i hope you pay B well for all the good work he does
9:00 @b get on pinterest and look at what ppl do with a section of railroad track...that tunnel look good 👊🚗💨
Nissonda for SEMA 2020!
Honestly love Nissonda, such a refreshing build
B is the man
I'm doing something like this to my Sunfire. I'm swapping out my 2.2 and 4T40 for a Hyundai 2.4 engine and a Ford AOD-E transmission, as well as a Ford 8.8 rear axle. All of these parts are gonna come from junkyard trucks and cars since brand new stuff is a lot more expensive.
Honestly, B is the fucking man. Love ya work bud
B is the man and is a God
B is such a solid individual
dude bhall is an absolute BEAST!
Awesome!!!! Well done guys killing it 🤘🤘
Epic job there B! Props for your skills my man!!!
Hey sup Jimmy Oakes From SW Florida have a nice day man and keep making more RUclips video it is very good and I like it a lot and i Love your car and be safe My Friend ?
next build jimmy and bhall should attempt is a s13front/rear converted skyline32
You can find anvils at yard sales at stuff alot cheaper if your lucky I got my dad to get me a little one cuz I was destroying his scrap break rotors trying to blacksmith stuff
"it works good for the illiminate guys" - b hall on whacking it
😂
Lol Jimmy pulls up a 20k anvil. That's like TOP of the market. Like a classic ferrari of anvils. You can get a really nice anvil for like $500-1000.
That is still serious money
It's nothing more than a lump of steel.
@@dorsch250 There are plenty of cheaper options, Harbor Freight even sells one for like $50, but you get what you pay for. Consider that an anvil is one of a blacksmiths most essential tools and it's not as outrageous. An empty toolbox can cost the same to put it into better perspective.
I can't wait to see this thing drift in person ✌😄👍
This is exactly what I needed I’ve been waiting to see some progress on her 🙏