Last video part 4 small overview
HTML-код
- Опубликовано: 13 сен 2024
- All the new parts I've installed and the calibration of my camera.
It is up to you to choose which additional parts you want. This depends on the budget, you can already use the laser even without a camera and automatic air assist. Same for the outer frame panels, there you can choose everything you want to use
PS:
Further fabrication,
has now done an update to linear rails, posted: 23/4/2021
see his video.
also the 3d printed parts.
And better Y engine design.
see link: • Ep10: A little Upgrade...
if you want a better system, use this one from Further Fabrication. designed by Rob
Leuk, ben ook net begonnen met een vergelijkbare bouw. Bedankt voor het delen van uw ervaring dit gaat mij goed helpen tijdens dit project.
I didn’t know lightburn could do the USB camera thing like the famous lasers that are sold these days. This is great, absolutely no reason to pay double for one of those!
Great build. I would like to see more of your videos.
Great build! Well done!
does the laser need a relay to the MKS dlc 2.0 machine as a voltage separator from the power supply to uncle's laser?
Dear Phillipe, first would like to thank you for sharing your build, It looks amazing!
Would you be able to share a link for the solenoid you have used?
Many thanks in advance.
www.amazon.com/Baomain-Pneumatic-Solenoid-Internally-Electrical/dp/B01J3C1LWG/ref=sr_1_20?dchild=1&keywords=solenoid+24v&qid=1633462759&sr=8-20
@@PhilippeRommens Many thanks!
Hey Philippe great work. What did you expect how much money i need to Spende for a rebuild?
Price is different for each country. Depents on shipping and tax, custom etc. Also where you purchase your precies. Between €1200 and €2100
Thank you for these videos, great details there. Question on your exhaust system, the fan you used is 6in or 8in OD along with the pipes and flex hose? can you provide details or link to the fan please
Max-Fan Buisventilator Pro Series 150 600m3/h 150mm
Link: onlinetopgarden.com/nl/lucht-en-klimaat/lucht/max-fan-buisventilator-pro-series-150-600m3-h-150mm
MAX and RUCK are the same
@@PhilippeRommens Thank you so much
What is the purpose of having a camera?
do you have the controller setup you can give out?
All settings are made in lightburn,
Setup is different for all diy co2 lasers, because of steppermotors and driver, etc.......
How much cost the laser?
Between 1200 euro and 1800 euro depends on your country and shipment and your lasertube wattage etc.......
@@PhilippeRommens thx 🙏🙏🙏😊😊
How the camera connection? and made on the controller? Flávio - Brazil
Congratulations on the project
via USB direct to computer and lightburn software. lightburnsoftware.github.io/NewDocs/UsingACamera.html
Thank you very much for the tip and attention.
Tengo algunas dudas y quisiera de ser posible poder aclararlas con usted
¿qué quieres decir? ingles si es posible, no entiendo ni leo español
@@PhilippeRommens I need to know about the configuration in the controller parameters, related to motor movements or displacements, that is, when I cut a 10mm line, I cut it to 16mm, I am using everything you recommend in your videos. Thank you very much in advance
@@yadianperezbernal2968 you have to calibrate the axis, to do that : in lightburn go to machine settings en you well see a buttom "calibrate axis" see this tutorial: ruclips.net/video/9BtyMj3hlMo/видео.html or in the manual
or this video: ruclips.net/video/v8kOH5McCjY/видео.html
@@PhilippeRommens thanks You soo mucho for your help. 👍
Plz give me link of the camera
www.sossolutions.nl/waveshare-imx179-8mp-usb-camera-a-hd-embedded-mic?gclid=Cj0KCQjwkIGKBhCxARIsAINMioKUfL4dYeQ4AH5G6rQ1TSpA496pZVbsPCGGdOiwy2lh7yavzgtupNsaAkvgEALw_wcB
@@PhilippeRommens thank you
What size laser tube did you use?
80 watt tube
@@PhilippeRommens Thanks. I have a 40 watt K40 that I want to enlarge the cutting area.