- Видео 11
- Просмотров 134 821
Philippe Rommens
Бельгия
Добавлен 23 ноя 2007
Xtouch screen
A 3D printed screenholder for the ESP32 touch screen.
For the Bambulab p1s and p1p
I redrew it so that the USB kabel would no longer be visible.
Downloadlink: 3D parts: drive.google.com/file/d/1pfcpU_e9ggE9SdyVcxjOggSx8t_R41JB/view?usp=sharing
For the Bambulab p1s and p1p
I redrew it so that the USB kabel would no longer be visible.
Downloadlink: 3D parts: drive.google.com/file/d/1pfcpU_e9ggE9SdyVcxjOggSx8t_R41JB/view?usp=sharing
Просмотров: 1 509
Видео
CNC-router
Просмотров 9369 месяцев назад
DIY cnc router, servo close loop servo steppermotor, 0.8kw bruschless spindel motor, workspace 430mmx470mm hight 120mm. UCCNC controller
DIY CO2 LASER mechanical part 500x440
Просмотров 6 тыс.Год назад
DIY CO2 laser cutter/engraver 50 watt laser tube, linear rail system, I tried as cheap as possible but still with solid elements or pieces. The working space is 500mm by 440mm and the reason is that I had many pieces at home from a previous project. so it falls between the most common 600x400 or 500x300 lasers. many pieces are also made with 3d printer in PLA tough
Part 5 Co2 Laser cutter complete with chiller
Просмотров 5 тыс.3 года назад
The laser cutter is now complete and ready for use. Laser tube is now well cooled with a CW5200 chiller, set to 20 degrees celcius. I also installed a liquid indicator so I can see at all times if the pump is working too. Now I'm going to show the start-up and laser a box in a 4mm thickness playwood
Last video part 4 small overview
Просмотров 6 тыс.3 года назад
All the new parts I've installed and the calibration of my camera. It is up to you to choose which additional parts you want. This depends on the budget, you can already use the laser even without a camera and automatic air assist. Same for the outer frame panels, there you can choose everything you want to use PS: Further fabrication, has now done an update to linear rails, posted: 23/4/2021 s...
first test DIY CO2 Laser Part 3
Просмотров 5 тыс.3 года назад
Took off my side panels today and installed the Laser tube. The mirrors are also aligned. And now my first test. I'm curious about the result. Whoow I'm happy PS: Further fabrication, has now done an update to linear rails, posted: 23/4/2021 see his video. also the 3d printed parts. And better Y engine design. see link: ruclips.net/video/seQAV-ozqNo/видео.html if you want a better system, use t...
Co2 Laser 600x400 part2
Просмотров 26 тыс.3 года назад
PART CO2 laser with working area of 600mm by 400mm. built from start to end. This is Part 2. The outer frame. Building the outer frame, electro box and tube extention. Everything is made with allu profiles. This CO2 laser has been fully adapted and all 3D printed pieces have been redrawn by me, this for the adjustment to linear rail system. Because quite a few people have already asked if this ...
Co2 Laser 600x400 part1
Просмотров 72 тыс.3 года назад
PART 1 CO2 laser with working area of 600mm by 400mm. built from start to end. This is Part 1. The inner frame. Everything is made with allu profiles and linear rails on the X and Y axis. This CO2 laser has been fully adapted and all 3D printed pieces have been redrawn by me, this for the adjustment to linear rail system. Because quite a few people have already asked if this is the model of Fur...
DIY CO2 Laser 600 x 400 foto update
Просмотров 2,8 тыс.3 года назад
FOTO VIDEO UPDATE WITH NEW ELEMENTS Soon I will upload new videos for making this DIY Co2 laser 600x400. with movable bed. Construction from start to finish and testing Now update foto video with outer frame and more. To be clear, my first model I built was from Further Construction. see link: www.furtherfabrication.com/new-blog/2019/4/20/the-laser-cutter-build-series and I definitely want to p...
DIY Co2 Laser 600 x 400
Просмотров 10 тыс.3 года назад
Soon I will upload new videos for making this DIY Co2 laser 600x400. with movable bed. Construction from start to finish and testing PS: Further fabrication, has now done an update to linear rails, posted: 23/4/2021 see his video. also the 3d printed parts. And better Y engine design. see link: ruclips.net/video/seQAV-ozqNo/видео.html if you want a better system, use this one from Further Fabri...
Very good! nice work!
In 3d print files, dont see the Y axis belt tension pieces.
just noticed you used two 2nd mirrors for mirrors 1 & 2...then butting together to align....smart, and better than having a pedestal for mirror 1...
Hello Mr Philippe-Where did you get the honeycomb tray?
@@habibcelik6733 Cloudray custom made
only thing i cant find...and not much was talked about is the print head gantry...looks printed. made donation. any help on a possible file would be appreciated....thanx
my 3d prints are only for the bed, the other 3d prints are from www.furtherfabrication.com/resources?category=Laser
Question, in the very beginning of the video, you are installing pillow bearings, are they on 650 mm length or 700 mm length pieces. I intend following your method, to me it looks more user friendly in beam alignment!
ello. I am starting to build a co2 laser and I have seen its assembly. I would like to know if you could show me a little more detail about the x-axis of your machine and the material used as the motor and pulley system. Thanks in advance.
Em 2024 por USD2400 já se compra uma máquina pronta a trabalhar
whew....an 80W laser....for $2400? let me know where
I wish they refresh the P1 series with better screen
You could totally sell these
My intention is to help people with what the possibility is for a touch screen
Hey Philippe, perhaps add a link to the gitlab repository in the description of the video. Great job btw.
Hello, Can you show me how to adjust the step for CO2 laser engraving machine using TB6600 driver and DLC32 circuit board. I searched for information online but could not find specific instructions on this issue.
Watch video, dependents witch laser software you use ruclips.net/video/3oSrnxJrz48/видео.htmlsi=G19qRNfuPdiNp-E_ ruclips.net/video/PipeAxhWbzE/видео.htmlsi=qn10VQNel3z2tMFo
Sir one last question can I use GT3 pulleys instead
You can use what you want
Thank you Sir
Hi sir GT2 30 teeth 9mm belt is not available in India. AliExpress is banned here. But 20 teeth 9mm belt pulley and loose pulley are available. Can I use this 20 teeth instead of 30 tooth pulley. Please help me Thank you
Yes you can use them, steps configuration for settings in software have to be adjust
Thank you very much! It is really appreciated for that quick reply.
How much cost the laser?
Between 1200 euro and 1800 euro depends on your country and shipment and your lasertube wattage etc.......
@@PhilippeRommens thx 🙏🙏🙏😊😊
Just one last question Phillipe, is it possible for the two stepper motors on the Y axis to be wired into the same driver or is it better if they have separate drivers for accuracy?
Thank you for asking that question, because I also have the same doubt.
Yes you can.
@@PhilippeRommensSir may I know how many drivers you fixed in your machine for y motors
depends on whether you use a rotary system or not. otherwise two and with rotary
Thank you for your quick reply
Thanks for the quick reply, yes I got the build plans and parts list from furtherfabrication, but his video is no longer available! so I can't follow it. That's what was confusing me. lol. Tell me are the items in the parts from FF list the same items you used in your build, motors, hardware etc, etc? I have all the 3d printed parts from Google Drive. I want to make the bed bigger by 100mm in width and length, but I'm having great difficulty finding a gt2 timing belt to fit the bed 2500mm, I'm in the Philippines and it is very hard to locate certain things here, and the shipping/delivery charges are killing the build. One last question, did you make a video of the wiring of the electrical components, I'm a British Civil Engineer and electronics is not my forte. Your build is easy to follow and very clear, so no issues there. Thanks again for your help. Dave S Reply
Hello, I paid and downloaded your parts list and build plans. The sizes in the parts list of the aluminum extrusion needed for the inner frame do not match the sizes of the aluminum extrusion in this video, Please help. For example at the start of this video (0.26 seconds) the on-screen list shows: 2 x 2020 length of 700mm and 2 x 2020 length of 650mm, in your xlms parts list file, the sizes are different! am I missing something? which list should I follow to get a 400x600 working bed?
Hello sir, did you happen to buy the frame and building plans from furtherfabrication? If yes, then you should follow his videos as well. On my video you can see all the sizes I use and the 3D prints are also made by me, for my model. link to my 3 parts: drive.google.com/file/d/1-aM0NhMfkDFz0nBsl0M0ORXafE1nr4xH/view?usp=sharing If you follow my video you will see all the exact sizes in the video that I use for each part. So the best thing you do then is watch the video and write down everything I use first and make or order these pieces to that size
@@PhilippeRommens Thanks for the quick reply, yes I got the build plans and parts list from furtherfabrication, but his video is no longer available! so I can't follow it. That's what was confusing me. lol. Tell me are the items in the parts from FF list the same items you used in your build, motors, hardware etc, etc? I have all the 3d printed parts from Google Drive. I want to make the bed bigger by 100mm in width and length, but I'm having great difficulty finding a gt2 timing belt to fit the bed 2500mm, I'm in the Philippines and it is very hard to locate certain things here, and the shipping/delivery charges are killing the build. One last question, did you make a video of the wiring of the electrical components, I'm a British Civil Engineer and electronics is not my forte. Your build is easy to follow and very clear, so no issues there. Thanks again for your help. Dave S
Hi Sir It is a beautiful video very helpful for me to learn diy laser machine projects Thank you for sharing all the necessary 3d printing files to build this machine. I downloaded it and printed it. After seeing your video I purchased almost all the spares purchased and kept ready for building it. Thank you very much for a very detailed making video. God bless you! With lots of love!! Raghuraman India.
Looks really good. One question I have. the compression spring for the bed tensioner. What are the dimensions for it? I must have missed that. Looking forward to watching your other videos.
Sir I just want to say first off your English is awesome so don't ever apologize for that, second, thank you for being so informative on your build process, some others I've seen tend to glaze over certain components, yours was very well presented and I really like the design of your 3d components. Keep up the great work!
The wallpaper💀
what do you mean by wallpaper
The Wallpaper💀💀
hello sir , thank you for posting this video i found it quite useful , my question however is if i were to increase the size of this machine , what would be drawbacks, and for example let's say i want the machine work area to be 900x600 is it as simple as increasing the linear rails and profiles by 300 and 200 in x,y directions respectively ?
Yes this is correct
@@PhilippeRommens thank you.
Hello Sir, I am in the process of building a CO2 laser cutter following your video guide. However, I am facing a bit of confusion regarding the 3D models. When I open them in the software, I don't see any dimensions. Do I need to recreate the dimensions myself, or can I directly use your 3D models for printing since all the components are the same?
You can print them direct
Exactly matching
I used RDWorks V8 with RD Controler.
Hello, congratulations on the video. What parameter did you use to use two motors on the y-axis?
Can you please share the bill of materials and total cost of the parts?
Please repost this video without music….. PLEASE
is this nema 17 or nema 23 stepper motor
Nema 17, everything explain in video
Bom dia, belo trabalho gostei muito pretendo fazer uma igual a do senhor, teria como disponibilizar a lista de material que foi usado para montagem, se for possível, agradeço desde de já parabéns pelo projeto.
Philipp danke für dieses Video Christopher aus Deutschland perfekt !!!
mucho material desperdiciado
Hi can you provide one with minimal material like Phillipe?!?!
Boa noite meu querido irmao, gostei muito desse projetinho parabens, teria como disponibilizar a lista materiais por gentileza, isso se for possível, grato des de ja.
Very nice!
hy, mega coole Sache! Ich denke, ich baue mir den laser auch selber! Wie viel hat das Projekt gesamt gekostet?
Thanks ❤❤❤❤❤
Great video but that finger clicking music makes it unwatcheable, sorry. Too annoying and distracting. So may videos ruined through this and that pulsing style of music.
Thanks for your contribution, very interesting and good video
Thanks Philippe, your contribution is awesome. I hope I could return the favor one day!
Hi, this is very interesting thank you. I am drawing a design in Fusion 360 following the video and using the dimensions of your 3D parts. I have a problem with the Z-Axis tensioners, the tensioner pulleys appear to be about 10mm lower than the leadscrew pulleys. The leadscrew pulleys are already sitting on top of the pillow block pulley bearings so there is no downward adjustment possible. In the video everything appears to align correctly. Any ideas appreciated. Thank you.
Hi sir do you have the build plan file
Neen, want dit gaat over minder dan 1mm, en de twee assen gaan altijd in de eerste fase samen naar de homing. dan zet de y as zich nog eens 100% juist 4:36 , ik heb al een paar alu stukken gefreesd. En alles was zeer nauwkeurig.
Prachtige CNC Philip, waarom servos en geen nema23 ?
Deze servo motors zijn ook een soort nema23, maar die zijn veel preciezer dan de gewone nema 23. En die verliezen geen stappen. En deze hebben ook een geintregeerde driver, dus moet je geen apparte driver meer nemen. Zoals bij closeloop steppermotors
JMC Servo iHSV57-30-18-36-21-38 AC Servo Motor 180 Watt / 36 Volt v605 NEW VERSION V605 Typ: iHSV57-30-18-36-21-38 Nema 23 Shaft length: 21 mm Schaft diameter: 8mm Centric diamer: 38 mm Total length: ca. 147 mm Flange size: NEMA23 / 57x57mm Hole distance: 47,14 mm Highly popular AC-Servomotor with 180W power and integrated driver. NEW VERSION V6xx Fits common NEMA23-Motormounts, very good for CNC use. Introduction: iHSV57-XX Integrated AC Servo Driving Motor is perfectly integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in low cost, full closed loop, all digital, low heat, small vibration, and high response, as well as includes three adjustable feedback loop control modes(postition loop, speed loop, and current loop). iHSV57-XX is a series of stable performance, high cost-effective motion control products. Multi Pulse Input Modes Pulse+Direction Opto-isolator Servo Reset Input Port ERC Current Loop Bandwidth:（-3dB）2KHz(Typical) Speed Loop Bandwidth: 500Hz(Typical) Position Loop Bandwidth: 200Hz(Typical) Motor Quadrature Encoder Input Interface: Differential Input(26LS32) Download parameters via RS232C from PC or Text Display. Users can define microsteps via external DIP switches or software. Overcurrent, I2T, Over-voltage, Undervoltage, Overheat, Overspeed, Overerror Protections. Green light indicates running, red light indicates protection or offline. Shaft length: 21mm Shaft Diameter: 8,0 mm
Practige build !! Vringt dat niet als hij zich op de Y axis gaat auto haaks gaat zetten?
HI Philippe, excellent work, I congratulate you, one question, do you have the estimate of the cost of the aluminum structure including motors and belts, without the components for the controller, mirrors and other laser components, I want to have an estimate to see if a similar project was carried out, thank you I congratulate you for your effort and dedication.
alu profiles: 121 € with shipment stepper motors an driver: 143 € with shipment belts: 6m x 9mm gt2: 16 € pulley: 46 € 3 lose and 8 x 32 teeth linear rail mgn 15: 3 pieces 90 € total between 450 € and 500 € depending on where you live and where you order. However, you have to search on different sites to find out what the best price is on the day of your orders. especially now with Black Friday, you can get good prices on aliexpres with a big discount
great job
Hello "I've purchased the machine plan, but I want to make the machine larger with a cutting area of 1100x1100. Do you think there would be any issues?"
No probleme to make it bigger, you have only to change all the profile lenght. Example if you want the X aces 1100 than you have to make them 500mm longer and the Y 700mm longer.
@@PhilippeRommens Have you placed a shaft on both the rear and front of the Y-axis motor? How did you create the rear side
Hello again Mr. Philippe. I hope you are still fine. GT2 6mm belt length 2220mm closed. It's mean - is its closed length or open length 2220mm? If it's the closed size, I couldn't find it. Can you help me find it? Thank you.
nl.aliexpress.com/item/1005004508844809.html
@@PhilippeRommens Thank you
nice work .. could you please send me 3d print files ?
Ben je steeds actief in co2 diy bouw? Groetjes
Ja, ben juist terug één aan het bouwen. Het volledige binnen systeem toch, dus laser klaar
@@PhilippeRommens je woont niet toevallig in limburg? grapje ben aan 't overwegen om er ook eentje te bouwen
Ik bouw het volledige binnenwerk met electro en verkoop deze meestal daarna, enkel prijs van de stukken. Geen werk daar ik graag bouw. Opgelet is wel niet meer goedkoop, door transport enz
Fanatic build, I bought all thr parts to build one 4 years ago lol just started now but where could I get the 3d print files from?