Give Me a Brake - V12 BMW E32 750iL - Project Karlsruhe: Part 5
HTML-код
- Опубликовано: 7 фев 2025
- In this episode, we replace the aftermarket wheels that the car came with and address its braking system. Complete brake caliper refresh with lines, discs and pads, and replacement of the brake pressure accumulator. Also, some unexpected parkour.
You can now support me on Patreon! - / m539restorations
T-Shirts, hoodies & mugs - teespring.com/...
Follow me on Instagram - / m539_restorations
Massive thanks to Radu from RT Design Studio for making the merch happen! - www.rt.md/
Wheel bearing removal tool - amzn.to/3o0Dy9W
Wheel hub puller - amzn.to/3o5NChY
Spring compressor - amzn.to/3eXHN0B
Sound deadening - amzn.to/3eWcxjX
Cockpit Cleaner - amzn.to/36Gye5N
All-purpose cleaner - amzn.to/3iBPPhh
Cockpit care - amzn.to/3lnGfQY
BMW E46 Floor Mats - amzn.to/3nsCGe3
Hazet suction gun - amzn.to/32DCMqT
Smoke machine - amzn.to/2E7WwJA
Flare wrench for brake lines - amzn.to/3avLaeB
Fantastic working lamp - amzn.to/3hijHjf
Pick & hook set - amzn.to/318LbCh
Compression tester - amzn.to/3ay3ofm
Vice soft jaw - amzn.to/31570T0
Butyl for door panels, headlights - amzn.to/2PZRbqn
Wheel cleaner - amzn.to/2EcqWKy
Hobby knife - amzn.to/3ay1Geb
Magnetic Retrieval Tool - amzn.to/3iT3AJf
Fabric spray - amzn.to/3jAvHxP
Drill brush attachments - amzn.to/2ZWqxVe
Find Liqui Moly oil and additives for your car - www.liqui-moly...
Email: M539restorations@gmail.com
"What kind of sound is that?" *spits at floor in a manly fashion*
Utterly brilliant and entertaining as always. Nice to see the 750 out for some attention!
Awesome video mate - keep it up!
"what better way then to test the brakes by going full speed towards the gate"
Thats what my uncle propably said before he drove his toyota landcruiser through the wall of a local grocery store
snap 🤣 hope he was ok
It's a LandCruiser - I'm sure the car had maybe a small scratch, the grocery store is what i'd be worried about!
@@lethalee only small dent and few scraches and he still has that land cruiser
"Cleanup on aisle six..." Hope he was OK.
We have owned ours for 12 years, best SUV ever
What I like about Sreten videos is that he knows the borders of being silly and never goes cringe. Love the editing and the amount of knowledge this videos provide! Keep them coming.
Cheap alternative for calliper paint: high temperature paint sometimes sold as tractor engine paint. 10+ years and no issues.
I'm refinishing the calipers on my BMW R100RS motorcycle with Duplicolor Metalcast Anodized Base Coat, Duplicolor Metalcast Anodized Color Coat (Blue), and Duplicolor Acrylic Clearcoat. Maybe a 2K clearcoat would be better. We'll see. Heck, they're only 43 years old. Lol.
To su ti jugoslovenski "alternatives" 😂😂😂😂😂
@@isidorantonic7335 istina
Finished mine with silver BBQ paint XD
@@Citizen228 I’ve tried these myself. They’re quite easy to scratch unfortunately, but otherwise seem to resist the heat and weather quite well so far.
"Slap me silly and call me Willy!" needs to be on a t-shirt
or "13 pumps and it's hard"
Sweet papaya😂
Don't forget the "Easy Peesy Lemon Squeezy"
laughed so hard when i first heard him say that. still laughed the same when I heard it again. lol
@@davidtaylor4975 lol
The Trinity of thing you can watch eternally:
- Running water
- Burning fire
- A man working (crossed out and replaced with) :
Sreten working on a classic BMW
And blonde trying to park
Any Project Binky reference immediately gets a thumbs up from me 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
That lot have been very quiet. No videos for months.
@@koolerking440 That’s normal, and Richard’s wife broke her femur.
@Jim And the next one’s out shortly!
It's worth sending the old accumulator away to have it looked at. This is basically a Citroen system and recharging spheres is pretty common in that scene as long as the membrane hasn't been damaged. A Citroen specialist would probably be the best people to speak to.
Also my 1979 Mercedes 300D had d TD
1979 Mercedes had a similar accumulator reservoir for self leveling rear end
In my experience recharged spheres are never as good or long lasting as new ones and for the price difference I personally wouldn't bother unless there really wasn't an alternative.
@@slacko1971 Fair point. My idea was that since they are unobtainium for him, it would be good to have a spare on the shelf for if he really needs one. That would at least get him through until the next batch are made.
@@edkalsbeek1765 Yeah. I believe various companies have licensed the tech from Citroen. Incl. Rolls Royce.
This is by far my favorite channel on RUclips currently. You have inspired me to restore a neglected non-running Oxford Green e46 which is now serving as my daily driver. I like how you're doing your own unique format and don't use the horrible overused free music. Keep it up!
Brilliant. I genuinely missed you. I look every day for a new video. And man, when it comes out, my wife takes a back seat, my work takes a back seat....I have to watch it. Entertaining as heck, informative, it's the whole package! Thank you!
3:18 Man totally agree, that looks beautiful!! Gorgeous new shoes
I like the automobile-themed play on words - Give me a brake (as opposed to break).
fantasic grammatical forensics my friend
It’s not funny if you explain it…
No need to explain it my friend, every car guy gets it
A couple of r/woosh among these replies lol
Thanks for clarifying it
0:53 These 16" alloys are the perfect upgrade, a nice move from 15" and 17" doesn't suit these beautiful old 7ers. I thought alpina as soon as I saw them.
"Coooming up, I show you how to really do a brake job". Just in time, my E46 needs rears. Now I need to order that caliper paint.
I do not often comment on videos - it's now the second time at one of your videos - but i really appreciate your content for a long time (since your first videos of the 8-series). It surely takes much time and effort to produce such long and good videos, but I think it's worth every single view which makes some bmw fanatic (like me) happy to see old BMWs becoming great again. Thank you for your content - keep on going!
Thank you Sreten for your inspiration, I bought a abused E60 530XD and revived it to it’s former glory. Maybe a bad investment but I love the E60 generation. I will be flying by with project bratwurst this weekend on our way to Italy, from the beautifull Holland!!
"Project Bratwurst!" Ik lach me suf ouwe! 🤣 Goeie reis! 👍
What once was called the Midas touch now its called the Streten's touch 😁😁😁😁. What he touches turns gold
This is the only channel that I don't skip a single second of detail. Thanks Sreten for your wonderful work. I feel like we are old pals even though we have never met after having watched your BMW videos for so long.
26:38 that's a great Expression
The E32 was my second car and made me fall in love with bmw i unfortunately had to sell it bc of money reasons but seeing you restore this beauty gives me indescribable joy
Foliatec is great, I had it on my car. Still looks good after 7 years :D
Great to hear!
@Matthias Berke Got some quantification at all mate? No use saying something is junk without giving sources or reason.
@Matthias Berke Nice, be good to know why you feel that - seems a fair few positive responses so perhaps sharing your story could reveal the issue!
@Matthias Berke clearly a disgruntled ex-employee, who got fired for drinking on the job. Otherwise he would have just explained
Pozdrav Sreten! The bad steering is often caused by a faulty Servotronic control unit not by a dead pump! You can easily check that and disconnect the control unit and stick the both connectors into each other. After a start you should have a full powered steering suppot again! Its an common issue! The unit is behind the leeft footwell speaker! Pozdrav from Zlatko with the 1,8 mio kilometers 750i ;)
So glad you are doing RUclips full time. Your Videos are like an addiction :D
You have no idea how helpful it was to see you rebuild the calipers from start to finish. I tried a similar project last summer and realized that not removing the calipers was a big mistake. Seeing your step by step process and how simple it was to replace the pistons, I wouldn't do it any other way in the future. The only thing that I would do differently is find a bench vise to hold the hardware while using a wire wheel so I could use both of my hands to control the electric tools. Also, your two stage epoxy application looked nearly flawless - way more successful than anything I achieved with caliper paint and a cheap brush. Excellent work as always, I feel like I learn so many practical tips and tricks from your videos that help me grow in this hobby.
Great! I have been looking out for a new episode. Even better because it is the E32, such a beautiful car. Love your choice of rims.
he missed a spot on painting the caliper :). I can't believe I am watching these videos in their entirety - this is my 4th restoration project video series. this isn't just BMW-specific teaching - this is how you should be teaching car mechanics. great job, enjoying every minute and I am totally latched to the screen. I can't believe I am binging on this :)
Is it just me but watching him paint the callipers with that music was so relaxing 😅😅
Clearly a mad genius and obsessive perfectionist. Such labor intensive work on brake calipers solely for the beautiful renovated appearance. I love it!
really appreciate all the time and effort you put into bringing us these fantastic videos, thank you
Hi Sreten, the old lower holder of the pressure accumulator you can glue to it without any issues with "MS-Polymer Montagekleber" or "MS-Polymer Kleb- und Dichtmasse" or "Karrosserie-Montagekleber" (it's this type of polyurethan-like glue in that 400ml Kartusche). That is absolutely sufficient and will hold longer than the rest of the car! Thank you always for your very interesting videos and wish you a happy new year 2024!
Now that's a proper 750iL with proper wheels! Great work Sreten, keep up!
Project Karlsruhe is by far my favourite of your project cars as i am doing the exact same restoration on my neglected 1988 e32 750il ( though very low mileage and almost rust free) it would never have run without the amazing videos and information you provide and you are 100% right every single time. My e32 was running rough, had bad cold starts and smelled like the bottom of a fish tank every time i started it. A complete restoration of the fuel system and igniton (following your guide) both made the job and the result joyful. From your perspective i assume 850ci and newer model e39/e60 gain more views, but the videos/tutorials you do on the e32's are second to none and cannot be found anywhere else on the internet and are therefore priceless to us. Keep up the good work, Sreten, and i hope i can get your tough but fair evaluation of my e32 some day.
26:35 One manly sound 😅🤣
How bout 16:17 omg
If I could have this guy for my BMW mechanic I'd never go anywhere else.
Thank you so much for this, gonna get myself a pizza, nothing better than a video like this after finishing another semester ❤️
I had this car 25 years ago, for three years. Bought it three years old. Within 3 years, I had to spend DM 950 for new brakes, what is pretty normal. Beyond this, a new light switch and a new windscreen washer pump, both for some DM 40.- each. And that´s it! It was a wondeful car. Fuel consumption of 16L/100km wa absolutely adequate.
I just love how Sreten always goes the extra mile!
or 1.609 kilometers.....
@@simonhaycocks touché
Those who dont watch this channel is missing out. Love the content and the value this provides.
Perfect timing! Just finished work so time to watch. Been eagerly awaiting your next video - i mean what have you been doing for 2 weeks? 🤣
Yes! Thank you!!! Finally! The E32!
I have 16 inch E38 basketweaves on my E32 also. The rears fit without spacers but the fronts do require spacers or they hit the front shocks when steering. To avoid weird looking offset for your wheelwells and strange handling, be sure to put spacers on all four hubs.
Check the alternator the rectifier/regulator can back feed and cause a battery drain 👍
Yep - duff alternator is usually the cause. Clamp meter is very helpful for fault finding for this :)
Your musical director knocked it out the park with the euro beat and the whatever it was that was playing while you were painting what is ostensibly your Sistine Chapel.
I’ve had good results painting the uncoated brake disks with zinc spray. The color is not great but it survives the heat and keeps surface rust away for several years.
Wow, thanks for the tip, gonna try it!
I have an advice for you for the future.
Epoxy based paints are great for protecting stuff from coroding, but they also accelerate corrosion more than salt if they are overheated (over 200 degrees of Celcius). Because of that its pretty bad idea to use it on stuff that gets hot (like brake parts, colling of the engine and others). If I were you I would just use high temperature paint instead of epoxy. It should last quite a bit if applied as you did.
Other than that everything looks good, cheers!
"I'm gonna go drink this"
Don't be so hard on yourself, you are a great fabricator! It is great to see you smash any curve balls this classic throws at you... the parkour was icing on the cake
I need to go back and watch the first 4 episodes again, this is gonna be sweet👍😎
I love the statement "this is what you gotta do to save these cars".
I'm very sentimental about my cars as well. I own 535i f10 and my baby 2015 M6. I've been searching for a nice e39 M5 but they are getting harder and harder to find and the prices are outrageous. I wish you were here in cali so you can help me wrench !
Hurray more E32 content! Well done as always :)
Just absolutely in love with this channel. I used to be deep in the E34 depths... but have since sold them all off and am driving boring reliable modern family cars. This channel brings me back to a time when I was single and let my passion for old BMWs lead the way. Keep it up, I just can't get enough. Cheers
9:54 great voice crack "I ran them though WATER"
For the un-coated discs, I always paint them with a spray can of silver high temperature paint that is sold for painting exhaust manifolds. This copes with the temperature of the disc very well and looks great, way better than bare cast iron. Also, I would recommend adding a vise to your bench, great for holding the caliper parts when wire brushing.
With these rims and no sunroof looks like the bulletproof version of this car.
It was so relaxing to see Sreten painting those brake caliper with the Picasso technique
11:58 a bob ross quote would have been nice
ye i was thinking the Bob ross of caliper painting
I LIKED the Ronal-esque star wheels...but you’re right: those center caps and wheels look brilliant on that E32. Well done.
Streten, I love your sense of humour! I had several big laughs during this video. I also love the rest of the content, so please keep at it :)
It's incredible! I do not know how you manage to engage with each video. I may take 2 or three days to watch the whole video; but in the end I watch it till' the end and I always have a huge smile in my face. Thanks a lot and great work! (With a smile in my face, and it counts. Keep it up).
"There is another issue, Windows stopped working"
~Sreten, driving a BMW
~me, using my PC
I admire your work for refurbishing the calipers, done it many times but for 400 Euro you have 4 refurbished ATE units.. saves a lot of time :)
32:30 good solution , the clamp is a holder for spiro piping for ventilation :)
The Foliatec is self leveling paint, done it on my 3 last cars and it works great.
TY for the video! I have really been on a roll with my E38 750. All new lemforder suspension, new fuel tank, sls delete, wheel bearings and new shocks and springs. It never ends but I still love it.
>Starts his video with "buon giorno"
How cheeky of you Sreten, twisting the knife after The Euro finals...!🤣🇮🇹
It was filmed in March :)
@@M539Restorations Then your timing is impeccable! 😁
@@M539Restorations Very clairvoyant! 😎
One of the other channels I really enjoy is Handtool Rescue and the host uses Evapo-Rust which seems to really do the trick for rust removal. Considering how rusty many of those tools are it does an amazing job.
Your work is perfect for me! Your videos are the best on the youtube! Thank you!
Really appreciate when you get into details on how and what items you use, the footage and your tips are extremely helpful
I've got so many problems on my head, but while i'm watching your video's, there are just bimmers and your freaky skills heh
Having worked on BMW's for most of your life, I'd like to see some buyer guides for the various models you've worked on, and list the common problems with prices for getting them fixed, etc. With your first-hand experience I feel like it would be amazing. Also because you show us in each and every video what it feels like to work on something you at least have the idea of.
Thumbs up if you agree!👍🏻
"Obsessed with OEM" You love to hear it
Those rims are sublime, so elegant and perfect on this car! Music when painting the Calipers sublime too!
"I wish I was Nick Blackhurst!" If you were, then your projects would still need finishing 6 years later (like Project Binky)
on the topic of grease and rubber bushings on the brakes. The ATE instruction actually says to use grease to mount the rubber bushings on the OUTSIDE of the rubber bushings. The BMW repair manual is right here and its not contradicting to the ATE instruction. You already mentioned the reason not to use grease on the bolts, it collects dirt. The rubber bishings from ATE are made of a special rubber mixture including graphene as a dry lube. Other manufacturers (like autofren) dont have this rubber mixture with graphene, that's why I only use ATE or BMW bushings.
Hope that helps.
Greetings from the Czech Republic, your videos are amazing and I really enjoy them
Great video as always. One tip, you can wash caliper with hot water to. Works great and evaporates quick.
Interesting how from German to English the Hardware Store translates as the Software Store ...lol
It doesn't. I think he just made a joke there. German to English Hardware Store would be the Construction Market.
You are an artist Sreten. And a good teacher as well. Good job as usual !
26:36 LMAO that spit
So manly!
Excellent fabbing on the accumulator. Gotta keep these rigs on the road.
I guess I'm not sleeping then
same here
@@wardeadfr same here
Australian location benefit - link arrived in the morning this time! :)
If I had the money to pay the dealer to work on my vehicle, this mechanic get my money every time. Proper, tidy job everytime. Big up yuhself boss 👍
What do you think of the bmw e9x 335i with the n54 engine?
Be ready to refresh all seals and gaskets, plus rod bearings. Do that and itll be solid 👍
I swear every video you release unveils another talent you have for restoring old cars! Hand painted callipers this time, next video are you going to cast some molten iron into a new engine block?
For real these videos are absolutely magical and you deserve every success coming your way, keep up the amazing work!
Next video: Searching for a hot fuse with a thermal camera while weather in Germany is at 35°C
Nah, no need. Open all doors/trunk/hood. Let it fall asleep - 16 minutes. Then measure on each fuse with a Fluke. The fuse with high draw has the circuit with the culprit. Easy peasy! ^^
The sound of a properly running M70 is such beautiful mechanical music, so smooth and refined! They do have a very nice way of pulling forward like you're being pushed by the hand of a god from behind, just a very flat and consistent torque curve giving you seemingly endless acceleration. They might not be quick be today's standards, but damn it when they hit their stride they are LONG legged! They do shift smoothly too, wonderful driving cars!
Also, for a car designed in the 80s, heavy and with a 5 liter v12, they are NOT as thirsty as some people might think! Sure, they do enjoy gasoline, especially if your driving is spirited, but drive it sensibly and you can keep it well under 15 liters per 100 km. 12-13 on the highway is to be expected if it's tuned up and serviced properly, maybe even 11 if you're taking it easy.
Wonderful cars!
Sreten be like: its not OEM, its gona break.
So, still loving your editing style and addition of classical guitar music is cherry on kuchen! when you cleaned of calipers getting ready to assemble, where you sanding back to bare metal or simply smoothing the epoxy? Happy for your success! your my bob ross of bmw restorations!!
it's scientifically proven that red calipers increase braking effect by an additional 0.2-0.5 m/s²
Awesome job on the brakes, Sreten. At first, I wasn't feeling your choice of wheels, but as the video went on, the wheels grew on me.
After watching you hold the calipers while wire brushing them, I would suggest you add a vise to your work bench.
The 16" rims and tyres look neato on the older 7. Have a safe and nice day all. CHEERS from AUSTRALIA.
3:21 now that's what i'm talking about. That's a car. Proper. Chef's kiss.
Can't believe I watched this to the end. Learned a few good things.
Thanks for the inspiration and keep on trucking!
Brillant work, can't wait to see Project Karlsruhe back in it's former glory! Wow, it's been a long time since I heard the name Foliatec, didn't know they still exist. First producer of tinting foil for DIY installation and later one of the first with the caliper color. The time where RH-Rims (which you just throw in the dumpster xD ), standox flip-flop colors, massive car audio installations with leather (simply leather EVERYWHERE, even in the engine compartment!) and the first steps of illuminations were the hottest sh*t in town :D
That creation looks like a small bomb, but whilst being transported in a very safe way. Good job! Brakes lookin' good as well.
Great work! I bought the same caliper paint kit, new hoses and caliper kits from your links. Look forward to giving it a go on my 750.
There's something a bit Bob Ross about the music when painting the calipers and brackets! Awesome work, awesome car!
I just did the calipers on my e46 m3 in December. They turned out great and have held up so far after 6 months of daily driving. Prepping and painting them took about 10 hours total but you have to be thorough if you want it to last. I used the brush on kit from G2. Removing them from the car is definitely the way to go!
Who the hell would give a dislike to this guy? Love your videos and the care you put in everything man! Keep it up, you are the best!
6:22
Thats a known problem, but you should try one of those suction cups with a hook. Just slap it on the cap and give it a good pull and the cap should come off without any scratches.
Great work as always. I'll be rebuilding my calipers and it was really confidence inspiring to see how straight forward the job is.
I greatly appreciate your E32 videos. Just so happens I have the same issue. I don’t ever like videos or share them. But due to our interaction on previous videos. You certainly deserve them friend. Cheers 🍻