You do not just repair, you completely disassemble, clean and rebuild. you have amazing skill and attention to detail. It is very admirable and I am in awe.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor with 20000 hours on drivetrain.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor with20000 hours motor.
Excellent job on restoration. I really like the paint on the tractor. It sounds great. You did a fantastic job restoring it. I can't wait until your next project. Thank you for sharing.
Not taking anything away from the effort but me thinks these guys have a lot of experience with these types of projects. Because there are a lot of pieces to clean up and put back together without getting any mixed up in the process. Just saying.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor with 20000 hours on motor.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor with 20000 hours on drivetrain.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor with 20000 hours on motor.
I agree. Roller bearings could be good, can be reused. But when the brake drums and shoes were put back together half dirty I was like... And then, putting back the crank into main bearing where it worn out down to the copper, that was it for me.
Just imagine if they had access to new parts and the equipment to do the rebuild by the book. Not taking anything away from their ability to do a teardown and rehuild with whats available to them. Nice work
Extraordinary great restauration job !!! Congratulations guys !! In Europe, except some people who like this kind of work (restauring old machines), there is less and less chance to manage to rebuild like you did, not just because of lack of interest, but because of our environmental drastic rules ! Go on guys !!! MARVELLOUS JOB !
Tuyệt vời em ơi. Còn trẻ mà giỏi nghề quá. Em vừa làm nghề vừa làm youtube là rất hay. Em nên đầu tư thêm máy móc, ví dụ như máy bắn cát, hoặc kỹ thuật phủ những lớp sơn bóng nhẫy để làm ra những sản phẩm đẹp hơn nhanh hơn thì thu hút được nhiều người xem hơn. Bây giờ sửa chữa những gì nhỏ nhỏ là người ta không thích xem bằng những chiếc máy cày, ô tô lớn hơn. Kỹ thuật làm phim cũng rất tuyệt vời, xem cũng sướng mắt. Chúc em thành công hơn nữa.
@@markomarkovic6470 I wouldn't recommend that either, of course, but they're not high-performance engines either. Small 2-stroke engines under 100cc are often bolted together by feel without torque and have to withstand much higher rpm....
You work with such confidence I have a yanmar 1700 water in the head started for a few minuets then turns but will not fire Im afraid to open a can of worms Wish you were here CHEERS
That right angle bend in the end of the tail pipe exhaust will reduce power. Go with 2 45degree bends and feel the difference. For hard work sometimes that right angle exhaust bend can overheat the exhaust valves and warp them.
Quedó bien , limpieza ,pintura y cambio de aros ,me imagino que le habrán echo, el escape quedó muy feo y los guardabarros también y no son seguros , los originales se podían reparar ,con paciencia todo se logra , saludos !!!
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor with 20000 hours on motor.
Hello. It's a great project that you have implemented. Congratulation!! The towing vehicle looked like a Shibaura. I have 2 of them. The SU1341 and the SU 1301. Unfortunately, I am missing repair manuals, spare parts lists and operating instructions. I would be very happy about help. Best regards. Carsten from Germany
Domnule "profesor", de câți ani profesati meseria asta?? 2. Se vede că este lucru simplu și trainic!!! Japonez adevărat!!!. BRAVO BRAVISIMMO ȘI succes în continuare. De la un român și țăran liber.
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a 40year old tractor with fake rebuild.
Parabéns pelo longo e dedicado trabalho de recuperação para dar uma nova vida a um velho Tratorzinho Yanmar japonês, o qual estava abandonado e apodrecendo mas, a partir de agora, poderá ainda prestar muitos serviços. Saúde, paz, alegrias e muito mais sucesso!
С этого момента этот трактор считай мёртв, ни одной детали не заменил, всё собрал на грязной деревяшке ещё бы в песочницу залез, динамометрический ключ... Не, не слышал. Поменять прокладки, кольца ,манжеты, подшипники... На. ху. я... Разберём, закинем песочка, т красивенько покрасим. Рукожоп.
excellent stirp down and rebuild, I like the new mudguards that you made however I think that they are each on the wrong side because the long edge should meet up with the back of the foot plate. From Australia
They cleaned everything ,did not change a single part or bearing, what the point??? East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor with 20000 hours on drivetrain.
👌🤗. Obdivujem pamäť, talent a pracovitosť.
Pozdravujem z EU. SLOVAKIA 🇸🇰
Love from Pakistan 🇵🇰 Bro nice work ❣️❣️❣️❣️❣️
thank you
@@restoration-restore-repair l
great video
T to yiyyiii TT yg
Yy
Top of the day befoed fgda
😂😂😂😂😂😂😂
@@ahmadkanjo537621
Waw good restoration project 🌟❤
Greatest idea I've seen yet....start at the rear and restore everything in line to the front.
Rr⁴
Oi
😢😢@@AnukumarAnukumar-gd4kw
❤❤❤❤❤❤❤❤😅😅😅😅
❤❤❤❤❤❤😂😂🎉😢😮
Nice ❤
Genius work 💯💯💯🌹🌹🌹🌹👌👌👌🙏🙏
thank you
great. I love tractor
Kerja yang sangat bagus 👍👍👍
Lol!
Yeah right! 😄😆😃
You do not just repair, you completely disassemble, clean and rebuild. you have amazing skill and attention to detail. It is very admirable and I am in awe.
thank you
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor
with 20000 hours on drivetrain.
good restore👍👍😘
thank you very muck
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with20000 hours motor.
That is not a restoration!!!
It was only a repair and poor paint job! They still need more original parts to make it a restoration!!!
@@restoration-restore-repair k baad me q o na
@@restoration-restore-repair tool cf
Looks beautiful. I'd love to see it running now.
With a good pair of glasses you 'd see it running at the end of the video.😀
@@Boubson😊
Good times. Used to rebuild wirh me father. Nice vid. Thanks.
good my friend,👍👍
thank you
.
@@restoration-restore-repair I like your videos👍
@@restoration-restore-repair llllllll
@@Sukabertaniofficial lp
Un ragazzo sveglio,bravo e preparato. Video stupendi.
Wow so beautiful fracture
😮8b
Этот парень достоин уважения как все сделал красиво!!
thank you very muck
Da.
Except for the ugly homemade fenders, etc, etc!
Thanks for sharing for this full restorerations of Yamaha machine kubota tractor
Te
Excellent job on restoration. I really like the paint on the tractor. It sounds great. You did a fantastic job restoring it. I can't wait until your next project. Thank you for sharing.
Güzel bir çalışma olmuş
Very good & completed fully restoration the tractor 🚜 👏 job thanku
@@haticecakmak7837 kjfjdpeszzlmxdmdlz
نج حجم
@@haticecakmak7837 ³mjj8
Awesome 👍💯💯💯🙏🙏🙏🌹🌹🌹🎂👌👌👌👌🙏
تعت
Not taking anything away from the effort but me thinks these guys have a lot of experience with these types of projects. Because there are a lot of pieces to clean up and put back together without getting any mixed up in the process. Just saying.
Good project and good results.
👍👍👍✨️🇺🇸🇺🇸🇺🇸
I can't believe how many people on here don't know what a restoration is!!!
It did not come from the factory like THAT!!!
@@TF856 👍👍👍
😅great video
Nos aqui no brasil já somos fã de todos os asiáticos, pela competência e educação. Parabéns pelo VIDEO maravilhoso.
I love these old Yanmar tractors! Nice to see people saving history!
Keep up the good work!
P
@@jageshwarisonwani7465 ÀÀ
@@anantagopal9670 ❤ংদধকশ
দদ্রুঘ্ন
@@jageshwarisonwani7465we OK i😊🛃↖️ 1:31
🇷🇺
Phai noi la anh gioi that thu gi anh cung hoi sinh duoc , chuc a co that nhieu suc khoe
hi.làm nhiều sẽ thành quen mà
Work manshap is not clean. Keep rocking🎸🎶🎶
بصحتكم والله عجبتني بزاف بزاف بزاف ربي يحفظكم و شكرا
My best friend, Great... Awesome... Full watched. Thanks Have a happy day!
Super fachowcy, robota wykonana super,
Tak!😃 Pozdrawiam z Polski!
They can't be done yet!
They have only done a repair!
They're supposed to do a full restoration!!!
They still need factory parts, decals, etc!
@@TF856 Sub!
Trator ganhou vida Nova trabalho bem feito nota 10 🥰🥰🥰🥰🥰🥰🥰🥰
thank you
А ГДЕ НАСТАЯЩИЙ ХАЗЯИН ..??
В АВРАГЕ ЗА СЕЛОМ )))
8iug
What a great find. Loved the rebuild. Thank you for sharing.
thank you
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
Ol
Pjps
@@restoration-restore-repair %iq
Bravo, cool job and beautiful videos 🎉
yes. like video
This is so satisfying 🤩🤩🤩🤩🤩🤩🤩🤩
Super 🌹♥️👌👌👌
Great job.
Felicitări, cu sinceritate!
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor
with 20000 hours on drivetrain.
@@jiefflerenard1228 You're right. But I think that was the goal, they had no money, no budget for anything else.
@@jiefflerenard1228 Cam asa e.
😲 wow nise
Que trabalho e paciência belo trabalho amigo fico lindo e trato novinho
mn
@@RakeshKumar-so4zx Q
_
0 UK😊pIn😮
Unbelievable lads well done! Newer saw a disassembled tractor to almost an every single bit and put together after!
Ok ok😊
đẹp tuyệt vời chúc mừng
😂❤😂😂❤❤😂😂❤🎉😮😮😮😮😮😮 আপনি অনেক ভালো কাজ করতে পারেন
TV
This guy is a one-man wrecking crew!! Only better, because he knows how to properly reassemble it.
Now they only have to finish restoring it with the correct parts and decals!
You’ve done a excellent job restoring the tractor very impressed with your skills
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
I agree. Roller bearings could be good, can be reused. But when the brake drums and shoes were put back together half dirty I was like... And then, putting back the crank into main bearing where it worn out down to the copper, that was it for me.
@@billbrox8666 hb
@@rajeshpingoliya4153 idnu
@@billbrox8666 f thisfffhuy
Good job 👍
You , Sir, are a world class technician. But every time you remove a nut or bolt, I fear you’ll break it. Very well done.
🎍🎏🎍🎇🏅🏈🏉🕹️🎿🥌🏓
🥈🏉⚽🥍🏓🏐🏀🥏
🏒🏐🏒🏅🏐🥎🏐🏆⚽🏀🏉🏅🏈🏀🏓🏓🏀
7 uttar hoon
1
SALUT PRIETENE TE URMĂRIM CU DRAG.SĂNĂTATE ȘI SPOR LA TREABA.DRĂGUȚ VLOG.PA.PA. NUMAI BINE PA.PA.PA.
Super bro
thank you
जबरदस्त आपकी टेक्निक है, मान गए गुरु
BRAVO.
🕊️🌹🇦🇱🇮🇹.
in,ALBANESI.
ITALY Abitare.
Great job bro
thank you
Thank you amazing brother.
Well done a lot of time and work but looks and runs well jimmy Aust
Just imagine if they had access to new parts and the equipment to do the rebuild by the book.
Not taking anything away from their ability to do a teardown and rehuild with whats available to them. Nice work
Extraordinary great restauration job !!! Congratulations guys !! In Europe, except some people who like this kind of work (restauring old machines), there is less and less chance to manage to rebuild like you did, not just because of lack of interest, but because of our environmental drastic rules ! Go on guys !!! MARVELLOUS JOB !
Thank you for being with us
Tuyệt vời em ơi. Còn trẻ mà giỏi nghề quá. Em vừa làm nghề vừa làm youtube là rất hay. Em nên đầu tư thêm máy móc, ví dụ như máy bắn cát, hoặc kỹ thuật phủ những lớp sơn bóng nhẫy để làm ra những sản phẩm đẹp hơn nhanh hơn thì thu hút được nhiều người xem hơn. Bây giờ sửa chữa những gì nhỏ nhỏ là người ta không thích xem bằng những chiếc máy cày, ô tô lớn hơn. Kỹ thuật làm phim cũng rất tuyệt vời, xem cũng sướng mắt. Chúc em thành công hơn nữa.
❤❤❤❤❤ nice
Wow... !!! My best friend, It's always great. Your video is excellent quality. We liked and enjoyed to the end. Thanks
Awesome❤😂😂😂😂❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉
Learn is the best skill and I am would have it
thank you
This is so funy to watch..... Build the motor without tork wrench... 😂
it`s a tractor, not a F1 car...
@@hera9539 good luck with flywheel and crankshaft without tork wrench
@@markomarkovic6470 no luck needed! my Yanmar FX255 is still running after a engine rebuild 5 years ago...
@@hera9539 maybe for this model ,but i would newer recommend to do without proper tool on other tractors
@@markomarkovic6470 I wouldn't recommend that either, of course, but they're not high-performance engines either. Small 2-stroke engines under 100cc are often bolted together by feel without torque and have to withstand much higher rpm....
You work with such confidence I have a yanmar 1700 water in the head started for a few minuets then turns but will not fire Im afraid to open a can of worms Wish you were here CHEERS
BODGE UP --- THE VALVE SEATS ARE BADLY PITTED and you refitted pitted valves. taking a machine APART AND PAINTING IT IS NOT restoring it.
you are right ,always the same procedure ,no parts replacement at all
Sid
Worல்ல்டீசீசூவூசூகீட்ஜ்க்க்க்க்க்க்க்க்க்க்க்ஜ்ஜ்வ்னிப்
great work guys!! vert good video.
Nice one brad
My brain is fried watching this lol. Great job though!!
You are very talented, another great job! Great looking little tractor.
That right angle bend in the end of the tail pipe exhaust will reduce power. Go with 2 45degree bends and feel the difference. For hard work sometimes that right angle exhaust bend can overheat the exhaust valves and warp them.
Ppv
⁰
hilobnskskssjsmska
Quedó bien , limpieza ,pintura y cambio de aros ,me imagino que le habrán echo, el escape quedó muy feo y los guardabarros también y no son seguros , los originales se podían reparar ,con paciencia todo se logra , saludos !!!
I'm still waiting for them to finish restoring it!!!
Yanmar forever !
Dismantelling is easy, but in refitting remembering all parts are difficult.
Wow! Amazing
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
@@jiefflerenard1228 à11
Sou do Brasil ...muito obrigado por esse vídeo excelente trabalho !
Good.job
,🥰🥰🥰🥰👍keep going
Good video
Brother how many days did it take to make the tractor 😊
Уважуха Мастеру. Очень круто 👍
Nice
Good restoration!!!
What restoration?
If they're doing a restoration then they are nowhere near finished!
It did not come from the factory like that!
คุณความจําดีมากครับพี่
Hello. It's a great project that you have implemented. Congratulation!! The towing vehicle looked like a Shibaura. I have 2 of them. The SU1341 and the SU 1301. Unfortunately, I am missing repair manuals, spare parts lists and operating instructions. I would be very happy about help. Best regards. Carsten from Germany
O Lucas tá com ela não estava bem
O Beto tá aí ainda 🤠😃😃
O que é o Beto já está em
Isso 👏👏😃
Isso 😸😸😸😸👏😃👏😃😃
Vry nice restoration 😃
They can't be done yet. That is not a restoration!!!
Domnule "profesor", de câți ani profesati meseria asta?? 2. Se vede că este lucru simplu și trainic!!! Japonez adevărat!!!. BRAVO BRAVISIMMO ȘI succes în continuare. De la un român și țăran liber.
I can't imagine a place where a machine sat in the weeds anylength of time and no one snagged those new tires.
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a 40year old tractor
with fake rebuild.
@@jiefflerenard1228ា ាាាា
ច១
P lpee
@@jiefflerenard1228 to ijj universities TV XL in BL to class all097úy⁶yytrrrr⁴
Parabéns pelo longo e dedicado trabalho de recuperação para dar uma nova vida a um velho Tratorzinho Yanmar japonês, o qual estava abandonado e apodrecendo mas, a partir de agora, poderá ainda prestar muitos serviços. Saúde, paz, alegrias e muito mais sucesso!
ippp
Pp0p
С этого момента этот трактор считай мёртв, ни одной детали не заменил, всё собрал на грязной деревяшке ещё бы в песочницу залез, динамометрический ключ... Не, не слышал. Поменять прокладки, кольца ,манжеты, подшипники... На. ху. я... Разберём, закинем песочка, т красивенько покрасим. Рукожоп.
@@mishelmishel2387 😂❤🎉
Nie ma jak panewki skrecac udarem.
🤔
excellent stirp down and rebuild, I like the new mudguards that you made however I think that they are each on the wrong side because the long edge should meet up with the back of the foot plate. From Australia
L
What does "L" mean ?
22:38 22:39
Genius Restoration !
Obviously you have no idea what a full restoration is!!!
I love you❤❤❤❤
ヤンマートラクターを蘇らせてくれてありがとう
good job,,,brother,,,,amazing,,,,,,,,,,,,,,,,,,,,,,indonesian language ..RUAR BIASSA,,,,,,MANTAP
très bon travail bravo
TrTAnstILate
They can't be done yet!
That is not a restoration!!!
I love watching these videos ! Americans can't even tie their own shoes 🙄
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor
with 20000 hours on drivetrain.
I am so impressed fair play to you sir 👏
What I don't get is why people don't take care of their equipment
Подшипники в гнездах прослаблены,похер,медной проволокой через акуамулятор наплавь
Труба длинная,обломит быстро.
大修之前先清洗是正確的做法。
Otimo trabalho parabéns
៨
Good work
But next time make sure you do change the engine oil filter ...