I was hoping you could help me identify a problem. I just bought a grizzly 350 from 2010. It only had 100 hours on it. It was working great the first couple hours I drove it then it just stopped running when I hit the throttle and then I couldn't start it again. When I try to start it it has a buzzing or vibrating sound coming from the starter relay. I'm hoping that it's just the switch is there anything else I should be looking at to fix? I will post a video of the sound and put the link in here.
Could be a couple things. Possibly broken starter gear. I am posting a video on a starter relay test. Make sure you subscribe to my channel so you know when that comes out. Jump the two leads and see if it turns over. If it does, then you have a bad switch or relay. If it does not then your starter is bad or your starter gear. Hope this makes sense. Let me know what you find!
when i take the starter out and test it, it spins like its supposed to. I can also feel the gear thats inside the case with my finger when the starter is out. When I re-install the starter and push the starter button, its just spins freely inside and nothing engages? On inspection, none of the gears appeared to be stripped, whats next?? 1999 Big Bear 350 4x4
ruclips.net/user/shorts2j2Hh8w9d6c?feature=share here is the video of the sound. Also there is a brand new battery in the ATV, so it shouldn't be a battery issues.
Great video and instructions I used to replace 2001 big bear starter.
Very good showing and explaining for diy learning like me thank you Daniel
Thanks for watching. Have you subscribed? Let us know if there is anything else you need! www.midnebraskamotorsports.com/
Can gas dripping in the starter also cause a big problem?
Thnx, i’m not a gear head but I can turn a wrench. I think i’ll give this a shot.
Hope it works for you! Thanks for watching! Lots more on the Grizzly 350 on my channel.
Video in cleaning the 350bruin starter thanks
I was hoping you could help me identify a problem. I just bought a grizzly 350 from 2010. It only had 100 hours on it. It was working great the first couple hours I drove it then it just stopped running when I hit the throttle and then I couldn't start it again. When I try to start it it has a buzzing or vibrating sound coming from the starter relay. I'm hoping that it's just the switch is there anything else I should be looking at to fix? I will post a video of the sound and put the link in here.
Could be a couple things. Possibly broken starter gear. I am posting a video on a starter relay test. Make sure you subscribe to my channel so you know when that comes out. Jump the two leads and see if it turns over. If it does, then you have a bad switch or relay. If it does not then your starter is bad or your starter gear. Hope this makes sense. Let me know what you find!
I’m currently having the same issue. Do you mind sharing what worked for you?
when i take the starter out and test it, it spins like its supposed to. I can also feel the gear thats inside the case with my finger when the starter is out. When I re-install the starter and push the starter button, its just spins freely inside and nothing engages? On inspection, none of the gears appeared to be stripped, whats next?? 1999 Big Bear 350 4x4
Even if the wire is still connected, doesn't the starter need to be grounded to turn it over with the start button?
i replaced startér on my yamaha kodaick 450 and all it do is spins i took the other side off and all the gears just spinning over no start
ruclips.net/user/shorts2j2Hh8w9d6c?feature=share here is the video of the sound. Also there is a brand new battery in the ATV, so it shouldn't be a battery issues.
Very good showing and explaining for diy learning like me thank you Daniel
Thanks for watching Daniel. Let us know if there is anything else you need! www.midnebraskamotorsports.com/