The body mount I got them on Amazon You do and if you want have to cut them down These are the plastic 8Pcs ShareGoo Plastic Body Post Mounts RC Car Shell Column Compatible with HSP Redcat Racing Lightning EP Drift STK STR EPX PRO 1/10 Scale RC Model Car (70mm) www.amazon.com/dp/B08HKHZY96/ref=cm_sw_r_cp_api_i_DZQMJDV1DFJ5Q0PRRS7H And the metal one in the video WEISHUJI Aluminum Alloy Body Posts,RC Aluminum Body Post Mounts for AXIAL 1:10 SCX10 Upgrade Parts 4Pcs（Blue） www.amazon.com/dp/B098SSRDVF/ref=cm_sw_r_cp_api_i_2RXQW7F79NSVVNBYDJK4
I got them at my local HobbyShop but you can get them on eBay part number are 20-T 6494X and 29-T 6492 Remember these are 5mm hole with will need a 5mm adapter sleeve if you have a 3.1mm shaft on motor
@@JuanCarlospr21 thanks bud I appreciate the response I have a 124019 I just upgraded to brushless and I was wondering where people where getting the mod 1 gearing. And yeah mines a 3.1 mm shaft so I'll need the sleeve awesome car btw u did an awesome job
Awesome thanks my friend happy to help you out a little now another thing if you do the mod1 gear you will need and adjustable motor mount and with that adjustable motor mount you will need you grind the U hole where the bearing of your stock pinion goes to you will have you open up the hole for the mod1 pinion to fit
Mod1 gear size is traxxas 6494x 20-t for motor And traxxas 6492 29t for the center drive shaft You will also need a 3.175mm to 5mm pinion adapter sleeve for the motor to add the 20-t pinion
Hola la ruedas la compré en eBay pero puedes usar cualquier foams que le guste así se llama las ruedas el tamaño son 30mm por 42 shore Las 4 Viene in diferentes marca yo use contact foam Las que están en foto y en el video son de la marca matrix también uso bsr racing tires foam
Lol I have crashed it broke it flipped it everything you can imagine has happen because of the speed motor gets hot but not to hot I only run it like for 8 min on a 1500mah 100c lipo
@@JuanCarlospr21 okies cool. Cause the thumbnail for your video, the car looks really good. I guess that's the thing. Scratch it once, after that U prolly don't care anymore! But thanks for replying. I had a 5700kv on my HBX 16889 and could only run it for a very short while till it gets too hot and turns off.
Tires are foam you can search for them and contact foam or xceed foam or matrix foam I have the 30mm all around you can do 26mm front and 30mm rear or all 30mm if you find 32mm there a little bit wider
@@JuanCarlospr21 saludos tengo ese motor surpasshobby f540 de 4300kv y esc de 60amp ese esc es bien alto y no cierra el body del carro como hago para que cierre? No lo eh montado por eso. Que pininion le tienes al motor y al spur?otra al ponerle la suspension de metal se te hizo facil aliniarlo? Yo tengo un pxtoys 9300 lo hize full aluminio y nunca me quedo derecho. Otra al ponerle el body phat hiciste modificacion al carro?
@@corolla810 para ese esc tienes q cambiarle el shell a phat body o hacerle un boquete al q tienes para así puedes poner el shell de fábrica pinion puedes usar el stock si es para todo terreno si es para speed mod1 pinion spur y motor alineamiento es fácil necesitas un hex finito y le das vuelta al de fábrica tengo un video aquí postiado q te enseña cómo hacerlo
Nice run. The Hobbywing setup is awesome! The 5900kv motor sure does the trick. 👍
Nice build…, nice touch with the Only Fans sticker…. 😁
Lol thank you
Yeahh ! Nice 👍👍👍👍
Thanks 🙏🏻
I love your car so so cool 😎
Lit 🔥
Bro this is clean!! dangg
Thank you 🙏🏻
Great Mod 😻👍
Super car 👌🤜🤛
Thanks 🙏🏻
Wow!!!!! I would love for you to hook my 144010 up. Iove the upgrades
Sure I can help out you out just lmk
I'm dropping g a 5900kvin mine good to see it's got torque
Very nice!!! What colour, type and brand?
You've built a Rocketship buddy!
And support 👍
Awesome project! Any issues with the metal upgrades? loose steering gear and tie rods ? I was wondering whether it's worth upgrading. Cheers.
No no issue just remember to use lock tight for the screws can’t do bashing with metal parts for street and speed is perfect
Where'd you get your body mounts
The body mount I got them on Amazon
You do and if you want have to cut them down
These are the plastic 8Pcs ShareGoo Plastic Body Post Mounts RC Car Shell Column Compatible with HSP Redcat Racing Lightning EP Drift STK STR EPX PRO 1/10 Scale RC Model Car (70mm) www.amazon.com/dp/B08HKHZY96/ref=cm_sw_r_cp_api_i_DZQMJDV1DFJ5Q0PRRS7H
And the metal one in the video
WEISHUJI Aluminum Alloy Body Posts,RC Aluminum Body Post Mounts for AXIAL 1:10 SCX10 Upgrade Parts 4Pcs（Blue） www.amazon.com/dp/B098SSRDVF/ref=cm_sw_r_cp_api_i_2RXQW7F79NSVVNBYDJK4
For the lights did you use a module to turn on and off or just a switch between the power and lights?
Both I use a module that I can control with ch3 but in this video I use a little switch to turn off an on
Can you do a light bash with that engine without damaging something?
Yes and no motor is fast you will have to lower it down a little for bashing
Where did u get ur mod 1 gearing
I got them at my local HobbyShop but you can get them on eBay part number are 20-T 6494X and 29-T 6492
Remember these are 5mm hole with will need a 5mm adapter sleeve if you have a 3.1mm shaft on motor
@@JuanCarlospr21 thanks bud I appreciate the response I have a 124019 I just upgraded to brushless and I was wondering where people where getting the mod 1 gearing. And yeah mines a 3.1 mm shaft so I'll need the sleeve awesome car btw u did an awesome job
Awesome thanks my friend happy to help you out a little now another thing if you do the mod1 gear you will need and adjustable motor mount and with that adjustable motor mount you will need you grind the U hole where the bearing of your stock pinion goes to you will have you open up the hole for the mod1 pinion to fit
@@JuanCarlospr21 sweet makes sense thanks again for the help
No problem 🙏🏻
what size mod 1 gears pinions for 144001
Mod1 gear size is traxxas 6494x 20-t for motor
And traxxas 6492 29t for the center drive shaft
You will also need a 3.175mm to 5mm pinion adapter sleeve for the motor to add the 20-t pinion
What size are you contact foam tires?
30mm all around you pics your shore I use 40 shore and 37
@@JuanCarlospr21 so I would choose 2 sets of rear tires correct? Because I do t see a front 30mm option
Front is 26mm but that optional if you want thinner wheels in the front but 30mm all around will be just fine
What size are your foams tires
Foam are 30mm all around
@@JuanCarlospr21 what shore, for street speed run is recommended?
Those are 40 I also do 37shore the higher the number the harder the lower the number is more soft
Where did you get the body?
I got the phat bodie atak here casterracingmi.com/index.php?route=product/product&path=164&product_id=2108
I like the Bumper.How You find it??You created??
Hello I did not create the bumper. The bumper is a LC Racing bumper part # L6040
Hola buenas, donde puedo comprar esas ruedas?, las quiero para mi 144010
Hola la ruedas la compré en eBay pero puedes usar cualquier foams que le guste así se llama las ruedas el tamaño son 30mm por 42 shore
Las 4 Viene in diferentes marca yo use contact foam Las que están en foto y en el video son de la marca matrix también uso bsr racing tires foam
Looks good. I would cry if I get one scratch on that car.
How long can you run it for? Doesn't the motor heat up fast?
Lol I have crashed it broke it flipped it everything you can imagine has happen because of the speed motor gets hot but not to hot I only run it like for 8 min on a 1500mah 100c lipo
@@JuanCarlospr21 okies cool. Cause the thumbnail for your video, the car looks really good.
I guess that's the thing. Scratch it once, after that U prolly don't care anymore!
But thanks for replying. I had a 5700kv on my HBX 16889 and could only run it for a very short while till it gets too hot and turns off.
What esc you have in stock??
For the 5700kv, I tried 2 60a and 1 80a ESC. They were cheap ones though. But the got hot fast
The highest I got my 16889 is a 4500kv on stock esc I bet your little truck is a beast with the setup you have on it
3s?
2s battery
Класс!!!💪
Thanks
How do you fit that esc on that mount??
I have the cut of a little on the center board where the stock esc goes and the phat bodies helps out a lot since it’s taller
I want the tire address.
Tires are foam you can search for them and contact foam or xceed foam or matrix foam I have the 30mm all around you can do 26mm front and 30mm rear or all 30mm if you find 32mm there a little bit wider
I have One 😉👍
Juan Carlos tengo ese carro quisiera hacerte pal de preguntas . Lo tengo con ese mismo motor F540 de 40kv y esc de 60Amp
Okay cual es la pregunta mi amigo??????
@@JuanCarlospr21 saludos tengo ese motor surpasshobby f540 de 4300kv y esc de 60amp ese esc es bien alto y no cierra el body del carro como hago para que cierre? No lo eh montado por eso. Que pininion le tienes al motor y al spur?otra al ponerle la suspension de metal se te hizo facil aliniarlo? Yo tengo un pxtoys 9300 lo hize full aluminio y nunca me quedo derecho. Otra al ponerle el body phat hiciste modificacion al carro?
Hermano tríame al fb I hablamos mejor
facebook.com/krliit0z
@@corolla810 para ese esc tienes q cambiarle el shell a phat body o hacerle un boquete al q tienes para así puedes poner el shell de fábrica pinion puedes usar el stock si es para todo terreno si es para speed mod1 pinion spur y motor alineamiento es fácil necesitas un hex finito y le das vuelta al de fábrica tengo un video aquí postiado q te enseña cómo hacerlo
@@JuanCarlospr21 cuando puedas enviame el link del video