Hello, i replace tail lights to euro, lamp switch too. I place wire for reag fog, and replace wires in connectors. But i dont know where place second cable for park light. Now when i turn switch to park, will turn on headlight too.
Thanks for the video. It was a great help. While I installed the European tailslights and lightswitch about three years ago, I never completed the wires to get the rear fogs to work (it's just such a pain to work in the footwell and I lack the patience). Anyway, wire 28 from the black connector seems rather short and doesn't seem to reach over to the brown connector. Any suggestions? Did you remove the tape from the black wire trunk (don't think I want to do that), or did you use some sort of an extension?
I see that the video was made 7 years ago but, in the beginning of the video you have that connector that goes in the harness with the yellow wire where can I find that piece at ?? Please help
Very nice video clip, well recorded. However, you lost me after you connected the fog light wire to the Euro switch. You inferred that it should go into the Brown control module - pin 17, but then you removed wires (green and grey) from the Black controller to connect them into the Brown controller. You made an attempt to "edit" (at 5:03) as to which wire goes were, (actually saying that the yellow/trigger wire with the tape - hence the fog light wire - goes in fact into pin 17 Black Controller, not the Brown controller) but it was in between takes. I watched 4 times and still have no idea why you removed the Green wire and leave it unconnected (just taped) or the Grey wire from pin 28 Black connector and snapped it into pin 47 Brown controller . It became like a cabbage stew since you split the Brown controller and haven't explained exactly which of the two yellow/trigger wires went into the Brown controller (and why)… You might need to revise/amend your video clip...
Hi! Great Video! I am curious if you'd be interested in adding part numbers for the switch you used, any pins you'd need or recommend, gauge wire used, etc etc. Some of these things are getting harder to find as time goes by. (We are seven years on this video currently :) ) To that note, I love when I get random comments on older videos. I hope this reaches you well and that you have a great day! Do you still own this car? What did you upgrade to?
Just realized the pin and wire comes with the kit you purchased. :) I'll probably find all I need via more Google by the time you may update. I'm sure future views finding your video in the ethers would appreciate it. :)
Hi My concern is about that fact that my driving headlights are own when I start the ignition, but I still need to turn the switch manually to the right end in order to get the dashboard and radio lights ON. I tried to buy only the switch which has (AUTO mode) as my old one didnt have that, I still not getting the dashboard lights on, what should I do?
Your local vw performance shop should have them dealer might have not sure. Pg performance is were I got mine but there only local in lower mainland bc
Hello, i replace tail lights to euro, lamp switch too. I place wire for reag fog, and replace wires in connectors. But i dont know where place second cable for park light. Now when i turn switch to park, will turn on headlight too.
Thanks for the video. It was a great help. While I installed the European tailslights and lightswitch about three years ago, I never completed the wires to get the rear fogs to work (it's just such a pain to work in the footwell and I lack the patience). Anyway, wire 28 from the black connector seems rather short and doesn't seem to reach over to the brown connector. Any suggestions? Did you remove the tape from the black wire trunk (don't think I want to do that), or did you use some sort of an extension?
I see that the video was made 7 years ago but, in the beginning of the video you have that connector that goes in the harness with the yellow wire where can I find that piece at ?? Please help
Second cable is for front fogs to? or just rear ones?
Do you have a bcm replacement video for the gtti? Your videos are very usefull. Nice job!
+Virakembala V i do not sorry mate but it shouldnt be to bad didn't seem to buried
+ghostlyrich let me know if you do it and thanks anyway :)
Very nice video clip, well recorded.
However, you lost me after you connected the fog light wire to the Euro switch. You inferred that it should go into the Brown control module - pin 17, but then you removed wires (green and grey) from the Black controller to connect them into the Brown controller. You made an attempt to "edit" (at 5:03) as to which wire goes were, (actually saying that the yellow/trigger wire with the tape - hence the fog light wire - goes in fact into pin 17 Black Controller, not the Brown controller) but it was in between takes. I watched 4 times and still have no idea why you removed the Green wire and leave it unconnected (just taped) or the Grey wire from pin 28 Black connector and snapped it into pin 47 Brown controller .
It became like a cabbage stew since you split the Brown controller and haven't explained exactly which of the two yellow/trigger wires went into the Brown controller (and why)… You might need to revise/amend your video clip...
Great video man but what website did you say I could visit for the codes??? I have euro led tail lights and I want to do the same.
Do you have the pinout of it?! I wanna to short the foglights in a way that is always on when I start the car... :)
Find a be tuner shop near you. They can actually go into your body control module with vag come and tell them to stay on all the time
Is this required for install on a 2013 b7 passat? Getting conflicting info from fourms on vcds or plug n play. Thanks
Hi! Great Video! I am curious if you'd be interested in adding part numbers for the switch you used, any pins you'd need or recommend, gauge wire used, etc etc. Some of these things are getting harder to find as time goes by. (We are seven years on this video currently :) )
To that note, I love when I get random comments on older videos. I hope this reaches you well and that you have a great day! Do you still own this car? What did you upgrade to?
Just realized the pin and wire comes with the kit you purchased. :) I'll probably find all I need via more Google by the time you may update. I'm sure future views finding your video in the ethers would appreciate it. :)
Hi
My concern is about that fact that my driving headlights are own when I start the ignition, but I still need to turn the switch manually to the right end in order to get the dashboard and radio lights ON. I tried to buy only the switch which has (AUTO mode) as my old one didnt have that, I still not getting the dashboard lights on, what should I do?
would this work for the rear fog if you have halogen rear lights?
Do you have to set this up in the car computer with vagcom?
Whats the green wire u pulled out for?
What is the part number for that yellow wire? Thanks!
Hey man! Wondering where you get the euro switch! I really need one lol
Gc_03 ecs tuning
thank you for the video. keep it up!
Would you know where the parking light wire goes on the mk5 I cant seem to find anything on Google.
Where can you get the yellow cable if it didn’t come with the order?
Your local vw performance shop should have them dealer might have not sure. Pg performance is were I got mine but there only local in lower mainland bc
p