I havent used XTR but I have Shigura setup with MT7 calipers and XT levers on 4 bikes, that how good it is. I recently just bought a full Shimano XT 4-piston brake set for a bike Im building for my nephew, thinking they would be strong enough… Boy was I let down. If the XTR is anywhere near the XT for initial bite and lever stiffness and all that, the Shigura setup is waaaaaaay better.
Hello, I have a question because I want to mount the mt5 caliper to my Slx m7100 lever. I see that in the video you connect plug n play a Shimano banjo to the Magura caliper, did you get the banjo mounting screw from Shimano or Magura? I will be very grateful for your answer, best regards.
Hola. Monté manetas SLX 7100 en un circuito de tubo Magura y pinzas Magura MT5eStop y banjo Magura. Solo puse oliva y tornillo de Shimano para conectar el tubo a la maneta SLX. Y el problema es que me fuga aceite por la unión del banjo a las pinzas Magura MT5. Sabéis cómo resolverlo? Gracias
Highest hydraulic leverage ratio of any combination out there. Never use the royal blood fluid as the boiling point is half that of Shimano. Better still a 0wt synthetic suspension fluid like redline likewater. Still doesn't get rid of the Shimano wandering bite point
Hello i got question. I have already Shimano XTR M9120 brake set. I want to change my calipers with MT7 . Do have to buy extra Magura disctube Brake tubing or i can use my XTR tube ?
The slx caliper is throwed to bin?!?!I rescue a slx caliper of wallapop,5€,the news pistons are 20€and i have the materials (liquid,grease) of another time,i have a really good brake for the price of 1 mt 200 brake!!
Cómo está todo en varios idiomas pues igual meto mi cuchara. Tengo una duda, por qué se rompen los pistones en estos modelos caros como slx? tengo unos mecánicos Tektro que son más económicos y no creo que tengan esa cosa blanca tan cara que según sé es de cerámica, pero igual como no sé bien prefiero que alguien me responda si gustan.
La cerámica es liviana y no se calienta cuando se usa en condiciones duras, pero la cerámica es fácil de romper si usa un destornillador para empujarla hacia atrás cuando reemplaza la nueva pastilla de freno.
Magura are the best brreaks I have used I have MT2 MT& MT8 on my bikes. If you fit the levers tight on the handlebars then yes they can snap. Never had any problems with the pistons breaking or leaking. With Magura you need a syringe to do a quick bleed takes 5 mins , look at all that crap you have to go through to do a bleed on Shimano! Shimano is really crap.
LMFAO Magura are the biggest shit to bleed, no quick bleed screw, total dumb, sad cause I like them, running shigura with a stahlbus quickbleed screw on the MT5, works like a charm, no more bubbles trapped because I can't put my caliper level to the lever.
@@tomekborucki1120 Problem is not that they are hard to bleed in general because they are not. The problem is to bleed them in a way to avoid bite point wandering.
@@MichalSzul m6120, the bite point was off when brought from crc, bleed at caliper, then burp at lever, no wander what so ever, m675, used, bleed at caliper, burp, perfection.
habe nach 3 jahren shigura (xt/mt5) wieder zurück auf mt5 mit hc hebel und trickstuff beläge gewechselt! viiel bessere modulation bei gleicher bremspower! 🤫🤫🤫🤫 shigura ist zu digital in der modulation, viel zu abrupte mega bremspower. zuverlässig war die shigura immer, nur bei nässe auf wurzeln und fels sehr tückisch! das sind meine Erfahrungen. das
Have been running my set for 2 years having about 100 different brakes before. Shitmano can't manufacture calipers that don't leak. This company is unable to respect retail feedback something's wrong with their products. They are unable to admit their ideas are bad. At the moment all what I use from shimano range are cassettes and bottom brackets.
@@tomekborucki1120 I work as a full time mechanic, get far more knackered shimano levers than calipers. Far more faulty shimano levers than magura and we sell a lot of magura. More problems with hope and sram than anything imo.
Shigura = best
Rubbish! MT7's 8's
@@alimantado373 😐
I just installed new XTR levers with MT7 calipers. Best brakes, ever.
How is the initial bite on this setup? Is it stronger than the full XTR setup?
I havent used XTR but I have Shigura setup with MT7 calipers and XT levers on 4 bikes, that how good it is. I recently just bought a full Shimano XT 4-piston brake set for a bike Im building for my nephew, thinking they would be strong enough… Boy was I let down. If the XTR is anywhere near the XT for initial bite and lever stiffness and all that, the Shigura setup is waaaaaaay better.
I bust my magura levers and stuck some old saints on worked spot on
Just thinking this combi yesterday if its possible? Your vids answered it thanks.!
Yep Shigura is the best brake set up.
Satisfying 😍
Magura Royal Blood 💙
Successo anche a me, ho comprato il pistone ceramico su aliexpress e funziona benissimo
yo tuve unos shigura y al final es solo un invento.Hayes dominion A4,lo mejor que he probado.Sin inventos raros
Eu fiz e ficou muito bom, manete slx + caliper MT5 e MT6
So if you have the brake in and work but you need a new lever. Why wouldn’t any hydraulic lever work?
Hello, I have a question because I want to mount the mt5 caliper to my Slx m7100 lever.
I see that in the video you connect plug n play a Shimano banjo to the Magura caliper, did you get the banjo mounting screw from Shimano or Magura? I will be very grateful for your answer, best regards.
Hola. Monté manetas SLX 7100 en un circuito de tubo Magura y pinzas Magura MT5eStop y banjo Magura. Solo puse oliva y tornillo de Shimano para conectar el tubo a la maneta SLX. Y el problema es que me fuga aceite por la unión del banjo a las pinzas Magura MT5. Sabéis cómo resolverlo? Gracias
Like I have an avid xo brake system on a specialized demo. Why wouldnt an xtr or even an xt lever work just fine?
Độc quyền của anh Đại luôn :))
Highest hydraulic leverage ratio of any combination out there. Never use the royal blood fluid as the boiling point is half that of Shimano. Better still a 0wt synthetic suspension fluid like redline likewater.
Still doesn't get rid of the Shimano wandering bite point
Hey, planning on doing this what brake lines do I need?
I'm thinking about the same thing
Can we use mineral oil instead of royal blood in whole break .. I have Shimano zee lever with mt3 calliper .
Sure, it should work
@@VietRiders tell me with one thing that it will give that power and buoyant force bcs in india royal blood is not available I have mineral oil .
Music Name?
Anh Việt cho em hỏi phanh dầu hoạt động như thế nào ạ
Khi bóp phanh dầu sẽ đẩy má phanh ép vào dĩa phanh thôi e
No meu pais nos chamamos isso de gambiarra bem feita!
So the screws for the break pads are not needed
For 4 individual pads you need the screws. The one piece pads have little tabs that stop them falling out.
Chú ơi chú cho con xin link dụng cụ phanh dầu ạ
shope.ee/8pOmpU8gTK
So the slx brake cable is compatible with magura mt5 caliper?
Not sure, I’m using magura hose because it’s connected to caliper, just change barb olive of shimano
Hello i got question. I have already Shimano XTR M9120 brake set. I want to change my calipers with MT7 . Do have to buy extra Magura disctube Brake tubing or i can use my XTR tube ?
Use magura hose, barb and olive from Shimano
@@VietRiders thank you ❤️
@@VietRidersoh another question what barb do i need to use Bh59 or bh90
Why use magura royal blood not mineral oil?
its almost the same
Is the caliper hose adapter compatible with Shimano and Magura?
Magura hose, olive bard from Shimano
The slx caliper is throwed to bin?!?!I rescue a slx caliper of wallapop,5€,the news pistons are 20€and i have the materials (liquid,grease) of another time,i have a really good brake for the price of 1 mt 200 brake!!
Sure, I will buy a new piston :D
MT5 vs Saint? what's the difference?
I have made the same thing but with a magura 2 piston calliper for the rear wheel … it s top for my enduro and my weight
How did the ceramic pistons break?
I dont know but you can hear the brake sound sometimes.
Magura 🤘
Nog grease needed behind the brakepads?
Nope :S
Chắc là các nhà sản xuất phanh sẽ phải nể phục chú :)))
À chú ơi bên xe con gấu có bán loại phanh Shimagura MT7120 như này ko chú:)))
eh, you use shimano banjo for magura caliper? it works?
Yes, it works
I use Zeegura
Cómo está todo en varios idiomas pues igual meto mi cuchara.
Tengo una duda, por qué se rompen los pistones en estos modelos caros como slx? tengo unos mecánicos Tektro que son más económicos y no creo que tengan esa cosa blanca tan cara que según sé es de cerámica, pero igual como no sé bien prefiero que alguien me responda si gustan.
Quizá para bajar el peso, ¿Se le podrá poner de otro material?
La cerámica es liviana y no se calienta cuando se usa en condiciones duras, pero la cerámica es fácil de romper si usa un destornillador para empujarla hacia atrás cuando reemplaza la nueva pastilla de freno.
What bleed kit are you using?
Ezmtb bleedkit
Thanks a lot!
Anh Việt có bán xe đạp ko anh ?
Dạ lâu lâu e bán xe cũ đang chạy ko à. Còn a mua xe mới a ghé thử Xe Con Gấu nhé. :)
@@VietRiders dạ. Xe đó ở đâu bán vậy anh ? Em muốn mua xe giao lưu với ae trong nhóm.
Calipers works with slx 7100?
Yes
Mamano slx5
Magura had some great levers too
Nope they really don't compare to shimano
What oil would u use then ?
Magura Royal Blood
Shigura royal purple 😆
@@VietRiders why ?
¿Funcionan realmente?
i'm ordering shimano deore 6100 levers for my mt5, the magura levers are quite meh
ghê quá anh he 😅
I’m over heeee like slx reel
Anyone know the song name please
Are Magura levers really so bad?
Not so bad, I just have a set of broken Magura’s levers .
Shigura thebest
Vs means against, not with or &....
Thanks
自転車に、4ポッドも要る?
ko thay piston thôi chú , tốn kém quá :))
nice, but for what ? yo no lo haría, me quedo con mis saint......................
Maybe because magura lever is shit material.. i dont really know other options😅
You are right … magura levers are made from plastic , fir weight reduction :)) the screw for bleeding is plastic too .. i broke it on my first bleed
Shigura
After all that, you put the wrong pads on. 🤦♂️
Bike needs a better fork
Uzun kullanımda bozulacak 🙃
This is supposed to be a professional service hahaha mixes the brakes lol
Shigura dumy
Magura are the best brreaks I have used I have MT2 MT& MT8 on my bikes.
If you fit the levers tight on the handlebars then yes they can snap. Never had any problems with the pistons breaking or leaking.
With Magura you need a syringe to do a quick bleed takes 5 mins , look at all that crap you have to go through to do a bleed on Shimano!
Shimano is really crap.
yer, so difficult to bleed shimano brakes said no one...ever, until 4months ago lol
LMFAO Magura are the biggest shit to bleed, no quick bleed screw, total dumb, sad cause I like them, running shigura with a stahlbus quickbleed screw on the MT5, works like a charm, no more bubbles trapped because I can't put my caliper level to the lever.
😂😂
Do it and spoil Magura breaks with Shimano's wandering bite point...
It is not wandering, it is just badly maintained. They are hard to bleed perfectly but once you manage to do that it is as consistent as any.
Bled hundreds of all shimano brakes. Mtb ones are very easy to bleed.
@@tomekborucki1120 Problem is not that they are hard to bleed in general because they are not. The problem is to bleed them in a way to avoid bite point wandering.
@@MichalSzul m6120, the bite point was off when brought from crc, bleed at caliper, then burp at lever, no wander what so ever, m675, used, bleed at caliper, burp, perfection.
habe nach 3 jahren shigura (xt/mt5)
wieder zurück auf mt5 mit hc hebel und trickstuff beläge gewechselt!
viiel bessere modulation bei gleicher bremspower! 🤫🤫🤫🤫
shigura ist zu digital in der modulation, viel zu abrupte mega bremspower. zuverlässig war die shigura immer, nur bei nässe auf wurzeln und fels sehr tückisch! das sind meine Erfahrungen.
das
Yup, the brake modulation is so fast
Terrible setup shigura, minimal modulation and once the pads wear a bit they feel terrible. Spend so much time in the shop replacing them.
Have been running my set for 2 years having about 100 different brakes before. Shitmano can't manufacture calipers that don't leak. This company is unable to respect retail feedback something's wrong with their products. They are unable to admit their ideas are bad. At the moment all what I use from shimano range are cassettes and bottom brackets.
@@tomekborucki1120 I work as a full time mechanic, get far more knackered shimano levers than calipers. Far more faulty shimano levers than magura and we sell a lot of magura. More problems with hope and sram than anything imo.
terrible if you don't like minimal modulation, I love it