Lot of Rambling . Should have cut to the chase at the end . Show a chart with the name of the Moderator, List the price, List the Sensor reading. DONE. Then you can disassemble on the topic. Not know why you did not simply show a chart at the end. Do appreciate you doing this, but not know why you failed to show the data at the end.
I owned a 50 ft lb Ripley XL9 in .22 caliber. Came with a 9" x 1.25" Ripley moderator, with felt washers and probably 8 baffles. (NOT the Logun version) It just went "click" very quietly!!! Still the quietest I ever experienced.
Nice collection. Hope te see more moderators. The Fox moderators are interesting to look into. Personally I like there Fox600 series. Its a long one. But 1/3 slides over the barrel. Making it stick les out in front. And fits perfectly on an m3 tentionkit barrel
I’m interested in fox as well but they only sell through resellers, two of them, both out of Netherlands and neither ship to the USA because “ USA suppressor laws and that they often get taken by customs even though they are legal”
Man, I’m glad you like your Vectis and doing a lot of mods and vids with it. Question; another video creator says it installed a Blitz top rail handle on his Vectis. Does this sound plausible without too much modification- like having to drill holes and such. Thanks maaan
A great selection of silencers to go at. I think your test is flawed though as so many others I have seen. I think the meter is picking up the hammer strike of the rifle which sounds pretty loud to me. In my opinion you need a board between the meter and the rear of the rifle to avoid the hammer action being picked up. It would be interesting to see if there is a difference. A great video to see so many silencers together. It would have been nice to know how much they cost as well. 👍
👋🏾sup brAh! Thank you for your input! Hammer strike or not regardless the db meter will still pick up the moderator when fired! It’s the end result that matters braddah👊🏾😎
Nice work we appreciate it. We can hear the difference in the moderators but I do think your db meter was to close to the rifle and you was reading more hammer to value rather than the exit audio. It would be interesting if you did a video with you db meter mid range to see what carries less. Thanks again.
Been aigunning for 48 years. It's simply jaw dropping when you witness a 30 ft lb, or more, air rifle make a simple click sound. And everyone around believes it misfired, including you. So they unscrew the moderator and it goes boom! Screw it back on and "click". I've seen this probably 5 times. Alan Z's moderators did that a few times. I sure wish I understood this
hey, if you don't mind me asking, what's the size of the thread adapter Terry from Buck Rail put into their moderator? The uni-adapter they provide is very brittle and would like to adapt to brass connector on barrel. I know the printed adapter and suppressor have M20X2 threads, but what should they reduce down to?
Bruh, you doing big things! All them mods smh. I picked up a wolfairguns mod, years ago, which they made specifically for my Hatsan. It was very inexpensive and quieted my gun waaaaay down (more than a few dB's). The weird thing is the next one I ordered was narrower and not as quiet (?) My question for you is does the two to three dB reduction make the moderator worth the effort? In your opinion. Anyway great review keep up the good work.
👋🏾sup brah! Any moderator will moderate sound some better that others! Moderation depends on the tune of your gun. A 12 fpe gun is quite thru moderation vs a 30fpe plus gun. I hope I answered your question about moderators braddah👊🏾😎
@@airgunspestingch.8426 I’ll reach out as soon as it’s ready.. what’s the best way to reach you? I’m printing a prototype today. We are a Michigan based family business. I design products and sell online. We will print these MJF moderators with a company in Texas once we get to production with them.
Great test man. I have 3 moderators for my 25 cal pcp air rifles. Buck-Rail is my favorite at $40.00. price is right and gets to my house in 3 days from Texas. DonnyFl Tanto is in second place at $119.00. Airgun Capital comes in 3rd at $28.00. All deaden the sound to an exceptable backyard level between 80 to 84 db. If you are on a budget, just go with the Buck-Rail!
I turned the sound off so I didn't have to hear the talking and sound of the action to get a better idea of just the muzzle sound, and to my ears, they were all pretty equally awesome so I think I'm gonna just go with the cheapest one. Also, was this the huma mod 40 or mod 30 ? You mentioned mod 40 when shooting, then mod 30 at the conclusion.
I have 4 Buckrail-line moderators they work remarkably well on co2 guns. A lot of the noise of a pcp is hammer bounce and the ping from the compressed air cylinder ringing like a bell Co2 guns don't suffer from ping so they are extra silent, I have 2 of the slip on Moderators which I believe they will stop making soon and 2 of the screw on like in the video on a crosman 2240 you will think your guns broken or lost power it's amazing the slip on cost 18 bucks at one time and the screw on was like 25 bucks now maybe 38 , that's 38 dollars like wow no way 38 bucks . BUCKRAIL-LINE ROCKS
Bro don't jump on the defence, it's obvious your not shooting in the direction of a school... I don't take you for a fool I just found it funny YES FUNNY as you don't say anything but it looks like you just rattle of rounds in the hood...
Your not getting my comment..... I'm not accusing you of anything understand? Your clearly a experienced shooter I never doubted that, get that? I found it funny did you read that? I'm saying what it .... forget it bro this is hard work it was meant to be a "what it looked like" knowing it wasn't and made me laugh...you keep going on about your property.... it's not funny now it's boring.. wow
👋🏾sup brAh! In the airgun world its better to say moderator or another word (ldc) lead dust collector than silencer because big daddy is watching us😉braddah👊🏾😎
Lot of Rambling . Should have cut to the chase at the end . Show a chart with the name of the Moderator, List the price, List the Sensor reading. DONE. Then you can disassemble on the topic. Not know why you did not simply show a chart at the end. Do appreciate you doing this, but not know why you failed to show the data at the end.
It is VERY important to understand exactly how decibels work. The numbers are deceiving without this understanding.
The Dog was the best indicator of how well they were working , he keyed on the impacts not the muzzle blast of air and sound .
Basically I was told for the most part it's all about the volume of space inside the moderator.
Great test.
Sharing is caring. Thanks 😊
👋🏾sup brAh! You’re welcome! Enjoyed making the video braddah👊🏾😎
The more air separation/stripper chambers the better👍
Thank you for the time you put in to help the rest of pcp users make up there minds with out spending wasted money. THANKS AGAIN
👋🏾sup brah! You’re welcome braddah👊🏾😎
Nice collection of suppressors bro. They are all backyard-friendly. The 0db, Huma and Impulse are particlularly really good.
👋🏾sup brAh! Agree braddah🇵🇭👊🏾😎
Thanks for taking the time to make this video. Have you had a chance to test any of these out on that JTS Airacuda yet?
👋🏾sup brAh! Welcome! Imo it’s not needed braddah👊🏾😎
I put on the buck rail on it. It's the quietest gun I have now
I owned a 50 ft lb Ripley XL9 in .22 caliber. Came with a 9" x 1.25" Ripley moderator, with felt washers and probably 8 baffles. (NOT the Logun version)
It just went "click" very quietly!!!
Still the quietest I ever experienced.
Nice collection. Hope te see more moderators. The Fox moderators are interesting to look into. Personally I like there Fox600 series. Its a long one. But 1/3 slides over the barrel. Making it stick les out in front. And fits perfectly on an m3 tentionkit barrel
I’m interested in fox as well but they only sell through resellers, two of them, both out of Netherlands and neither ship to the USA because “ USA suppressor laws and that they often get taken by customs even though they are legal”
@@malcomnotinthemiddle343 hope maby they get reseller's in the US
Man, I’m glad you like your Vectis and doing a lot of mods and vids with it. Question; another video creator says it installed a Blitz top rail handle on his Vectis. Does this sound plausible without too much modification- like having to drill holes and such. Thanks maaan
👋🏾sup brAh! Never heard of it braddah👊🏾😎
Wow ! This valuable info is the true meaning of “ Sharing is caring! “
👋🏾brAh! Thank you braddah👊🏾😎
A great selection of silencers to go at. I think your test is flawed though as so many others I have seen. I think the meter is picking up the hammer strike of the rifle which sounds pretty loud to me. In my opinion you need a board between the meter and the rear of the rifle to avoid the hammer action being picked up. It would be interesting to see if there is a difference. A great video to see so many silencers together. It would have been nice to know how much they cost as well. 👍
👋🏾sup brAh! Thank you for your input! Hammer strike or not regardless the db meter will still pick up the moderator when fired! It’s the end result that matters braddah👊🏾😎
A completely failed test.
Unsilenced should read about 95db. Silenced S.B. around 75db or a suppression of about 20db.
@@felinis3788 👋🏾sup brAh! Ok so it a failed test! That is what my db meter reads! It is what it is braddah👊🏾😎
A completely failed test.
Unsilenced should read about 95db. Silenced S.B. around 75db or a suppression of about 20db.
Informative video
👋🏾sup brAh! Thank you braddah👊🏾😎
Do you have a spreadsheet with your data? A little editing would go a long way here
Nice work we appreciate it. We can hear the difference in the moderators but I do think your db meter was to close to the rifle and you was reading more hammer to value rather than the exit audio. It would be interesting if you did a video with you db meter mid range to see what carries less. Thanks again.
👋🏾sup brAh! Thank you! The problem is I won’t be able to read the db # braddah👊🏾😎
@@airgunspestingch.8426 Get a helper
Video starts at 27:15
Been aigunning for 48 years. It's simply jaw dropping when you witness a 30 ft lb, or more, air rifle make a simple click sound. And everyone around believes it misfired, including you.
So they unscrew the moderator and it goes boom! Screw it back on and "click". I've seen this probably 5 times. Alan Z's moderators did that a few times. I sure wish I understood this
Who is Alan Z? THanks
@@alwayson999 Alan Zasadny
Best airgunsmith,/tuner ever breathed. A legend. Look him up. Just a slight "click"
@@cdgee6399 Awesome, I will. Thanks so much.
Where's the chart with a ranking
You pronounced Weihrauch almost perfectly! Although the one you have has dutch writing on it, but close enough :))
👋🏾sup brAh! Thank you braddah 👊🏾😎
hey, if you don't mind me asking, what's the size of the thread adapter Terry from Buck Rail put into their moderator? The uni-adapter they provide is very brittle and would like to adapt to brass connector on barrel. I know the printed adapter and suppressor have M20X2 threads, but what should they reduce down to?
👋🏾sup brAh! Terrys moderator are 1/2-20 but I bet if you contact him he could change it for you braddah👊🏾😎
Bruh, you doing big things! All them mods smh. I picked up a wolfairguns mod, years ago, which they made specifically for my Hatsan. It was very inexpensive and quieted my gun waaaaay down (more than a few dB's). The weird thing is the next one I ordered was narrower and not as quiet (?)
My question for you is does the two to three dB reduction make the moderator worth the effort? In your opinion.
Anyway great review keep up the good work.
👋🏾sup brah! Any moderator will moderate sound some better that others! Moderation depends on the tune of your gun. A 12 fpe gun is quite thru moderation vs a 30fpe plus gun. I hope I answered your question about moderators braddah👊🏾😎
Nice . "cm3" seems to matter the most...With some exceptions. Would not be surprised, if the exceptions were the ones with the biggest exit hole..
I wish you had put links to where to buy these moderators.
👋🏾sup brAh! Under the title you can google the names of the manufacturers braddah👊🏾😎
We are working on a new MJF printed version that is extremely effective.. Uses a threaded stainless steel metal insert.
👋🏾 would like to get one to test🤔?
@@airgunspestingch.8426 I’ll reach out as soon as it’s ready.. what’s the best way to reach you? I’m printing a prototype today. We are a Michigan based family business. I design products and sell online. We will print these MJF moderators with a company in Texas once we get to production with them.
Wow
👋🏾sup brAh! Thanks braddah 👊🏾😎
So basically moderators doesnt moderate. haha.
Great test man. I have 3 moderators for my 25 cal pcp air rifles. Buck-Rail is my favorite at $40.00. price is right and gets to my house in 3 days from Texas. DonnyFl Tanto is in second place at $119.00. Airgun Capital comes in 3rd at $28.00. All deaden the sound to an exceptable backyard level between 80 to 84 db. If you are on a budget, just go with the Buck-Rail!
👋🏾sup brAh! Thank you! 3D moderators are becoming very popular braddah 👊🏾😎
What are the sizes of the exit holes on the 4 quietest?
👋🏾sup brAh! Don’t know? Haven’t measured them. Long time not seeing you on RUclips braddah👊🏾😎
@@airgunspestingch.8426 The closer the exit hole size is to the pellet diameter the quieter it will be.
Are those half by 20 threads on the barrel itself or is it an adapter?
👋🏾sup brAh! 1/2-20 braddah👊🏾😎
@@airgunspestingch.8426 but is it an adapter or is the barrel threaded
👋🏾sup brAh! 1/2x20 barrel threaded braddah👊🏾😎
@@airgunspestingch.8426 thank you kindly
I turned the sound off so I didn't have to hear the talking and sound of the action to get a better idea of just the muzzle sound, and to my ears, they were all pretty equally awesome so I think I'm gonna just go with the cheapest one. Also, was this the huma mod 40 or mod 30 ? You mentioned mod 40 when shooting, then mod 30 at the conclusion.
👋🏾sup brAh! 30 braddah👊🏾😎
Hello brother, mine is the one that is not used often heheh🇵🇭🇵🇭🙂
👋🏾sup brAh! Salamat braddah🇵🇭👊🏾😎
So seems like really doesn't make a difference on which moderator you get as long as it is a legit one. 3-5 decibels really isn't a consideration.
Hi from France , l’ve a pp750 in 22 , for you , tatsu is good for ? Thank
👋🏾sup brAh! Yes good for po75 braddah👊🏾😎
@@airgunspestingch.8426 ok my friend 👌
Like the content just wish the video wasn't so full of fluff. Thank you for sharing
👋🏾sup brAh! Fluff?
Video starts at 26:02
Edit: 27:00
👋🏾sup brAh! ? Braddah👊🏾😎
Impulse 1350 vs Ronin Im interested in hearing
And DonnyFL Yokozuna and Ryu
BuckRail is best considering the price is cheaper than a can of pellets.
👋🏾sup brAh! Sure you’re right braddah👊🏾😎
I have 4 Buckrail-line moderators they work remarkably well on co2 guns. A lot of the noise of a pcp is hammer bounce and the ping from the compressed air cylinder ringing like a bell Co2 guns don't suffer from ping so they are extra silent, I have 2 of the slip on Moderators which I believe they will stop making soon and 2 of the screw on like in the video on a crosman 2240 you will think your guns broken or lost power it's amazing the slip on cost 18 bucks at one time and the screw on was like 25 bucks now maybe 38 , that's 38 dollars like wow no way 38 bucks . BUCKRAIL-LINE ROCKS
So what was the end results? Can someone name the top five in order? I'm kind of at work and can't keep watching the video.
So I just ended up ordering the larger 0DB in black haha.
@@kellandmclellan6710 👋🏾sup brah! Good choice braddah👊🏾😎
I like how your just shooting randomly over your neighbours roof in to the neighbourhood ….lol
👋🏾sup brAh! I’m glad you know the layout of my property and what’s behind the roof!🙄 ydks braddah👊🏾😎
Bro don't jump on the defence, it's obvious your not shooting in the direction of a school... I don't take you for a fool I just found it funny YES FUNNY as you don't say anything but it looks like you just rattle of rounds in the hood...
@@Hutchy46 👋🏾sup brAh! That roof happens to be my pole barn and beyond that is a open field wooded area fyi braddah👊🏾😎
Your not getting my comment..... I'm not accusing you of anything understand? Your clearly a experienced shooter I never doubted that, get that? I found it funny did you read that? I'm saying what it .... forget it bro this is hard work it was meant to be a "what it looked like" knowing it wasn't and made me laugh...you keep going on about your property.... it's not funny now it's boring.. wow
@@Hutchy46 👋🏾sup brAh! Had to re-read again! I get it now! Braddah👊🏾😎
Are you shooting into the sky? 😮
👋🏾sup brAh! Yes! Braddah👊🏾😎
Bet all the patents for these have the word Silencer not moderator. Why use the word?
👋🏾sup brAh! In the airgun world its better to say moderator or another word (ldc) lead dust collector than silencer because big daddy is watching us😉braddah👊🏾😎
Less talking & get on with the testing
👋🏾sup brAh! 🤔fast forward braddah👊🏾😎
stop wafling and get on with it
👋🏾sup brAh! Right on! 😂🤣braddah👊🏾😎
Will i get in legal issues when I put on a Moderator on my Air rifle?
👋🏾sup brah! Not if you put it in an airgun braddah👊🏾😎