I am so proud to see two young men doing something constructive with their lives. I also think you two do some damn good work. I wish I had the money to buy your merchandice and to help you build a much needed garage. I wish you all the best and god bless you both keep up the good work
Quick tip: Next time you apply decals, spray under the surface with water, then put the decal over it. This way it won't stick and you can move it around. When you are happy with the position, you use the blue tool to press all the water from under the decal. Works like a charm. Keep up the good work.
Love the cameo by whom I presume is your little sis. That must be fun for her to pop out and watch you guys building the Jeeps n' such--not to mention setting the tone for her expectations of men when she grows up, the way it should be!
Been following this channel before y’all hit 5k subscribers, every time I watch a new upload you have at least another thousand! Keep up the hard work and the badass content, it’s definitely paying off! God bless fellas!!
I love your guys videos every time I watch them I get up from whatever I am doing and go try and recreate what you two are doing with my friends and family keep up the great work!
Flag etiquette: When hanging the American flag in a flying position (sideways like on your Jeep), the stars always go in the upper left. When hanging the American flag in the hanging position (down), the stars always go in the upper left. But it still looks cool.
What do you think about future rust starting in the holes you drilled for the running boards you installed? If you don't rustproof those holes, rust will start around the metal eventually.
You guys might think about adding a safari snorkel to one of your Jeep builds. This Jeep might already be sold but on another Jeep. Even people who just use Jeeps as mall crawlers a snorkel works great as a cold air ram intake.
BTW Just picked up decal for under the hood. where everyone represents. I will be showing my rig at the Bantam Heritage Jeep Festival on June 8th. Birthplace of the Jeep!
Way to go guys that freaking Rubicon looks sick can't wait till you guys get your own shop.. remember people smash the s*** out of the Subscribe button and kick that notification Bell right in the you-know-where peace out. 👍👍😁✌
goonzquad if you don’t seal it then water and dust will get in there, wear off the paint, and start rusting it out. Just look under a plastic drop in bed liner in a truck, even the new ones have already started rubbing the paint.
Is there a way I can chat with one of you two I’ve watched a lot of your content and I’ve been thinking about doing something like this in my hometown we have a Jeep club and I’m thinking about restoring jeeps that have been wrecked like how you guys do and then raffle them off but I’d like a little bit more intel on how you guys go about purchasing the vehicle thank you
I am so proud to see two young men doing something constructive with their lives. I also think you two do some damn good work. I wish I had the money to buy your merchandice and to help you build a much needed garage. I wish you all the best and god bless you both keep up the good work
roger wixom Thank you so much and god bless you too!
Jeep looks good, I’m glad you got the flags oriented correctly!
Quick tip: Next time you apply decals, spray under the surface with water, then put the decal over it. This way it won't stick and you can move it around. When you are happy with the position, you use the blue tool to press all the water from under the decal. Works like a charm. Keep up the good work.
The best young guys on the Tube .... great to see your work. You guys learn very quickly
Love the cameo by whom I presume is your little sis. That must be fun for her to pop out and watch you guys building the Jeeps n' such--not to mention setting the tone for her expectations of men when she grows up, the way it should be!
That jeep looks so awesome.. i'm amazed of how good it looks, Great work guys
Putting that work in pays off! Nice job men keep it classy
Glad to see I'm not the only one with the idea for flush mount rectangular tail lights for the TJ.
Been following this channel before y’all hit 5k subscribers, every time I watch a new upload you have at least another thousand! Keep up the hard work and the badass content, it’s definitely paying off! God bless fellas!!
These videos are what I live for!!
My favorite channel by far. This channel is gonna blow up for sure
Love the vids!! Can’t wait till you guys have a shop!
Great work again, love the choices made for that blue Rubicon. It's like your in me head or something.
Awesome Looking Rubicon
Love your vids. You guys have inspired me to get an old jeep and fix it up in the near-ish future
I love your guys videos every time I watch them I get up from whatever I am doing and go try and recreate what you two are doing with my friends and family keep up the great work!
Awesome Rubicon guys! Just ordered a sticker can't wait to get it!
Look’n awesome guys😀👍🏾 Got my decal yesterday😀
goonzquad yeahhhhh!!! that rubicon is looking better and better
Awesome looking jeep we have a artic edition i love your videos and everyday i look forward to seeing them
This channel is gonna blow up. Mark my words
Flag etiquette: When hanging the American flag in a flying position (sideways like on your Jeep), the stars always go in the upper left. When hanging the American flag in the hanging position (down), the stars always go in the upper left. But it still looks cool.
i look forward every day to watch these
Jeep is lookin great guys, keep up the good work!
Y’all boys do the Jeep world Justice well done fellas
Man that rubicon is looking better ever video!!
Good idea on the break lights for the green jeep
that little girl needs to be in every video she reminds me of my daughter who i dont get to see a lot and she is so adorable!
tommy 554 then do something about it thay grow so quick cannot get that time back
You should try drill holes with a smaller one first, then the bigger one. The Jeep looks amazing by the way.
That blue one is starting to look like a mighty fine machine. Looks like they took my advice to make the vids over 10min. 🖒✌
I just love ur mods n rebuild guys .. Peace.
you guys are killing it!!
Can’t believe how much the channel is blowing up
I got my decals in the mail!! Rocked one on my cooler. Going to put the other one on my big toolbox.
minitrucker007 Heck yea👍
love your guys video’s! keep up the good work!!
God damn, u guys do better work then most companies
She’s lookin clean!
I liked it cause your little sister was super adorable about that like a subscribe! You guys have great videos! I've been subbed since 9k!!!
What do you think about future rust starting in the holes you drilled for the running boards you installed? If you don't rustproof those holes, rust will start around the metal eventually.
Yall killin it
Can't wait to see the tires on. Nice job fellas.
I recommend one thing, get rid of that ricer exhaust tip.
MTLKEBEK It’s a borla tip lol but it looks ricerish
I love your videos,keep em coming!
yes another video!!!!
keep up the good work guys!
Red bull sponsor question mark😂
Next video make sure y'all say "winner winner chicken dinner" like 10 times 👍🏻😆 y'all are awesome
I have that same tool that they use at 7:00, it’s from a wrap kit
Savvy makes lights like you described.
Did you guys paint the holes you drilled for the sliders?? That bare metal will rust in no time
Thomas Rossi No we didn’t 😅
came to say the same!
You guys might think about adding a safari snorkel to one of your Jeep builds. This Jeep might already be sold but on another Jeep. Even people who just use Jeeps as mall crawlers a snorkel works great as a cold air ram intake.
Cleetis McDougall yea we still got this jeep we may do a snorkel
Also love the vid you guys really make great content
Lookin good!
could have put some rubber washers when attaching that side slider to the tub, water will have no problem entering the cockit this way
Amazing....OlllllllO the best 💯💯💯💯💯💯💯💯💯
Check out savvy offroad. They make a flush mount led like you are interested in.
BTW Just picked up decal for under the hood. where everyone represents. I will be showing my rig at the Bantam Heritage Jeep Festival on June 8th. Birthplace of the Jeep!
Talez From the DashCam Heck Yea bro!
Thanks Dude, Love to represent
You guys are doing a great job but i reckon you should do up the newer white rubicon as well, not so much the older blue one.
Way to go guys that freaking Rubicon looks sick can't wait till you guys get your own shop.. remember people smash the s*** out of the Subscribe button and kick that notification Bell right in the you-know-where peace out. 👍👍😁✌
You should do a Jeep Grand Cherokee
I’ve seen square led taillight, they are very thin and look like almost flush to the body, look for them at truck accessories stores
looking good guys
Hello from mexico a love hoy videos
are you guys selling the green one or is it already sold? they are all good builds keep up with the great work
I sure hope that you put some sealant under those rock sliders, or that body is going to rust out underneath where the slider is covering over it.
Troy Wiltshire Dang it didn’t do that
goonzquad if you don’t seal it then water and dust will get in there, wear off the paint, and start rusting it out. Just look under a plastic drop in bed liner in a truck, even the new ones have already started rubbing the paint.
How do you prevent rust from getting those holes you drilled ??
Alright, another video!!!!!
Where are you getting the rubicon and jeep stickers? I found the original jeep stickers were 25 bucks from Mopar! That's crazy.
Make the square flush tell lights with some LEDs
The jeep I turning out really good
Is there a way I can chat with one of you two I’ve watched a lot of your content and I’ve been thinking about doing something like this in my hometown we have a Jeep club and I’m thinking about restoring jeeps that have been wrecked like how you guys do and then raffle them off but I’d like a little bit more intel on how you guys go about purchasing the vehicle thank you
that little girl is the goat
gyz no need to paint the trim.... just use the fiber polesh.... it will do the job.....
love from india. bro🇮🇳🇮🇳
Restore a 4 door wrangler!!!!
U guys should buy a Crown Victoria for a project called the “crapatoria” and give the Vic off-road tires!
Cut and Buff? Should have been done before accessories/decals. Looks great boys!!
hh65flyer Definitely but we got a cool tool coming soon for the hard to get areas
Love the jeep
Fricken beaut of a Jeep
😔 I really don't feel worthy enuf to even watch... but,,,,,, GREAT JOB GOONZ'IES!!! THAT'S ONE RAD RUBICON!!!! 👍👍👍👍👍👍
You guys make me wanna buy a Jeep 😊
I think you should do the flush square tail lights on the green TJ
Have you sold the F250 haven’t seen it for while?
I hope you paited the holes you drilled for the sliders, otherwise they are going to rust.
davkenrem yea we did
Nice work 🚗
You guys are so good
What did you use to under coat the iner fender what brand
Cummins Farmer Rustoleum
Be here since 2k subs
What ya gonna do with the jeeps? Are y’all gonna sell them?
Goonzquad#builtnotbought
#jeeplife
Are you guys going to jeep beach in Daytona beach FL?
Justin Naff would love to, we might
What sliders are these?
I went back to watch these vids and was like I hope he puts the flag on the right way! lol then was like let me go check the comments lol
hey guys how many of these rebuilds do you sell
hahah 3:42 did you just try to fly?
You guys should make a hoodie with a small goonzquad patch on the chest to the left
Angel Mata Gotcha will be done
Check out the Savvy low profile taillights. They make exactly what yall are talking about
Awesome I am in N.C.
Did you sell the F250?
I receive my decal today , its nice im gone to put on my jeep windshield corner
WewalTV Heck Yea bro!
Man this was when I started watching yall, what ever happened to that jeep?
Idk if you’re going to get this but it looks like that on this jeep the front windshield folds down on top of the hood